基于RuO2-IrO2/Ti和Fe0电极的电氧化-电絮凝处理含Tl废水

基于RuO₂-IrO₂/Ti形稳电极和Fe⁰牺牲电极实现电氧化-电絮凝(EO-EC)一体化处理含Tl (I)废水,并与单一的电絮凝(EC)进行比较,探讨了EO-EC处理含Tl废水的机理.结果表明,相较于单一EC,EO-EC (1:1)组合技术适应于宽pH (4-10)以及电流密度范围(5-20mA/cm²)下含Tl废水高效处理,且不易发生钝化;活性氯以及氧化还原电位在Tl (I)间接氧化Tl (III)过程中扮演重要角色,沉淀分析表明生成的Tl (OH)_3(s)与絮体Fe (OH)_3(am)共沉淀,纤铁矿位点可吸附残留Tl (I).EO-EC一体化技术可满足实际含Tl废水达标处理(<2µg/L)且具有经济可行性.     

我国脱硫脱硝行业2013年发展综述

综述了2013年我国脱硫脱硝行业的发展环境及发展概况;重点介绍了火电行业、钢铁行业、水泥行业脱硫脱硝产业发展现状;分析了行业市场特点及重要动态;针对行业发展中存在的主要问题提出了解决对策和建议.     

我国工业固体废物处理利用行业2013年发展综述

综述了我国工业固体废物处理利用行业2013年的发展环境形势和发展概况;介绍了2013年国内工业固体、危险废物及生活垃圾的产生量和处理情况;阐述并分析了目前国内固体废物处理技术和设施的现状;就行业发展存在的主要问题提出了建议.     

Analysis of the implementation of effective waste management practices in construction projects and sites

In this paper, the implementation of effective waste management practices in construction projects and sites is analyzed, using data from a survey answered by 74 Spanish construction companies based in Catalonia. Most commonly implemented practices were found to be on-site cleanliness and order, correct storage of raw materials, and prioritization of the nearest authorized waste managers. The least widespread practices were the use of a mobile crusher on site, the creation of individualized drawings for each construction site, and the dissemination of the contents of the waste management plan to all workers, to help them to meet its requirements. Waste regulations for construction and demolition, and the corresponding construction waste management facilities, were designed before the recession in the Spanish construction sector. Current waste generation rates are still below predicted levels, and the infrastructure was designed for five times more waste generation. Even so, the percentage of reused and recycled waste currently amounts to 43%. Survey respondents highlighted various instruments and measures that would make the management of construction and demolition waste more sustainable. Most of the opportunities identified by construction firms are within the scope of government and related to a combined system of bonus and penalties and the establishment of environmental awareness and training programmes for all the stakeholders. Within the scope of authorized waste managers, firms suggested improvements such as the standardization of fees, a reduction of the time until the issue of waste management certificates, a higher number of inspections, and a change in the current model of a few large construction waste management facilities. This research is useful to better understand the current status of construction and demolition waste management in construction projects and sites. Thus, the results of this research will guide policy makers and relevant stakeholders such as contractors, clients, architects and engineers to achieve the EU target of recovering 70% of construction and demolition waste in 2020. In this sense, reliable information can help governments and professional associations to set future C&D waste management regulations, training programmes and dissemination tools, inspections, etc.     

The Convergence Analysis on the Economic Growth and Energy Intensity Gap between Regional Sectors

In this paper,the authors have analyzed the relationship between energy intensity gap and GDP per worker gap of China’s western and eastern provinces over the period 1997-2006.Using panel data model with lag adjustment,taking the above provinces and six industrial sectors (agriculture,forestry,animal husbandry,and fisheries,industry,construction industry,transport,storage and post & telecommunications,wholesale and retail trades & catering industry,and other sectors of tertiary industry.) as the investigated subjects,the authors have conducted empirical study on the convergence of GDP per worker gap and the convergence of energy intensity gap with respect to the variation of GDP per worker gap,and have concluded that:First,the GDP per worker gap of the six industrial sectors and provinces are convergent,and of this,the convergence rate of GDP per worker gap of Construction Industry is the fastest,while that of Industry is the slowest.Second,the overall energy intensity gap between eastern and western provinces is convergent,that is,with the narrowing of GDP per worker gap between eastern and western provinces,the energy intensity gap converges,but its convergence rate is slower than that of GDP per worker gap.Third,energy intensity gap between various industrial sectors of the east and the west is either convergent or divergent,and there are differences.The energy intensity gap of agriculture,forestry,animal husbandry,and fisheries,industry,and construction industry is convergent,while that of the other three industrial sectors is divergent.Fourth,the convergence of the overall energy intensity of the western provinces is not in conformity with the convergence of the various industrial sectors,and there are significant differences,indicating that the western provinces and autonomous regions should take measures to more effectively improve their overall energy utilization efficiency at the industrial sector level.     

Heavy-metal adsorption by non-living biomass

The adsorption of some heavy metals onto the walls of harvested, washed, and dried non-living biomass cells of different Pseudomonas strains was studied at optimum experimental conditions using a simplified single component system. The Langmuir adsorption model was found to be a suitable approach to describe the system via multi-step processes. Isotherms measured at 30.0°C and pH 5.5 with [M]_total = 10-100 mM for tight, reversible Cr⁶⁺(aq), Ni²⁺(aq), Cu²⁺(aq) and Cd²⁺(aq) binding by the cell walls of the investigated biomass fit the Langmuir model and give the pH-independent stoichiometric site capacities ν_i and equilibrium constants K_i for metal binding at specific biomass sites i = A, B, C, and D. Tight binding sites A, B, and D of the non-living biomass are occupied by Cr^VI, sites A and C by Ni^II, sites A and D by Cd^II, and only site B by Cu^II. It is concluded that ν_i is a stoichiometric parameter that is independent of the magnitude of K_i for binding site i and that the studied heavy metals selectively and tightly bind at different biomass sites.     

Local Area Quotas for Industrial Emissions along Reaches of the Pearl River in Guangdong

There is an obvious departure from the regional equilibrium of developments between the upper and lower reaches of the Pearl River in Guangdong, which resulted in ＂the effects of contra-geography-grads development＂. It is mainly because the upriver mountainous areas have been deeply stuck in industrialization delay and marginalization plights, so that nearly 40 million local people have conceived a dream to get rid of ＂the vicious circle of poverty＂ by speeding up industrial development. But the problem is that such industrialization efforts on a large scale in mountainous areas are encountering the bottleneck of environmental capacity that strictly limits industrial emissions along the upper reaches of any water system. As a solution, an institutional arrangement called ＂the Local Area Quotas for Industrial Emissions along the Pearl River＂ is put forward supposed to give corresponding compensation to the rights of industrial development yielded by some areas with lower environmental capacity through the distribution and trading of IDQs.     

碳源对工业污染场地土壤中HCHs和DDTs降解的促进作用

我国对有机氯农药的大量需求使得在农药生产、加工和分装等过程中造成了许多城镇中存在有机氯农药污染场地,限制了土地的后续开发利用.本研究选取3种类型的碳源组成有机修复剂A、B、C,添加到受有机氯工业污染场地土壤中进行微生物降解试验,并对比了3种修复剂的效果.试验过程中,反应体系水分含量为50％,添加零价金属调节氧化还原电位,采用好氧/厌氧交替循环方式进行生物降解.实验结果表明:3种修复剂对HCHs和DDTs的降解都有显著促进作用.与DDTs相比,HCHs较易降解.90 d内,添加修复剂(A、B、C)的处理中∑HCH的浓度分别从73.37~85.71 mg·kg^-1降解到了15.88~38.21 mg·kg^-1.与未添加修复剂的对照相比较,∑HCH的降解率提高了19%~52%,90 d内,ΣHCH的降解率最高可达81%.添加修复剂(A、B、C)的处理中ΣDDT的浓度分别从91.68~119.79 mg·kg^-1降解到了45.1~60.7 mg·kg^-1,相对未添加修复剂的对照试验,∑DDT的降解率提高了39%~45%,30 d内∑DDT的降解率最高可达到51%,但30 d后降解效率无明显增加.就不同类型碳源的促进作用来看,C/N最高,而含水率最低的修复剂B的效果最好,而C/N比最低而含水率最高的修复剂A效果最差.     

复合吸收技术净化复杂工业有机废气

以低浓度、大风量、含无机物、尘粒和油分等成分的复杂工业有机废气为对象,进行复合吸收净化技术的研究,从吸收机制初步探索,对净化设备、工艺流程及工程应用分别进行了探讨.分别以3种不同的表面活性剂溶液为复合吸收剂,考察其处理含甲苯和醋酸丁酯废气的净化效果,结果表明降低复合吸收剂的表面张力,有利于甲苯和醋酸丁酯的去除率.针对复杂工业有机废气,开发高效吸收设备,集合了水膜、旋流板和填料3种吸收净化装置的优点于一体,具有结构简单、体积小、防堵塞及多级高效吸收传质的优势.工艺流程以吸收技术为主,整合了加热吹脱、燃烧和厌氧等工艺,最终使废气和吸收尾液达标排放.该技术已在制造、喷涂等多家企业的工程上应用.