应用相平衡分配法建立湘江衡阳段沉积物重金属质量基准

采集湘江衡阳段29个站点的表层沉积物样品,测定沉积物中4种重金属(Cu、Pb、Zn和Cd)含量及赋存形态、以及孔隙水中重金属含量,根据相平衡分配法的基本理论,考虑参与沉积物-水相平衡分配的重金属组成,实测法计算重金属的沉积物-水相平衡分配系数(Kp),分别引用美国EPA制定保护水生生物不受重金属慢性毒性影响的基本连续浓度(CCC)和我国地表水环境质量标准(GB 3838-2002)Ⅰ类水质标准,建立两种湘江衡阳段沉积物重金属质量基准(SQC)进行对比分析,其中基于美国CCC建立的湘江衡阳段沉积物重金属质量基准与国内外研究成果相比可比性较好,4种重金属(Cu、Pb、Zn和Cd)的SQC值分别为64.62、55.57、1 360.40和2.34μg.g-1,此SQC具有保护长期生活于沉积物中的底栖生物不受重金属慢性毒性影响的意义.通过单因子评价法将湘江衡阳段沉积物中重金属总量与沉积物质量基准值(SQC)进行比较,结果表明,湘江衡阳段沉积物中Cd和Pb含量水平对底栖生物具有较大的慢性毒性影响,Cd污染不容忽视.     

山东省临沂市土壤有机氯农药滴滴涕残留量与空间分布特征

通过对临沂市全区表层土壤每36 km2进行样品收集,测试分析了DDTs、Org C、N等指标,主要研究了区域表层土壤DDTs的残留现状、组成和来源、影响因素、空间分布和环境质量特征.结果表明,调查区表层土壤中DDTs检出率为71.75%,平均含量为0.035μg·g-1;检出样品中p,p'-DDT和p,p'-DDE为主要残留物,平均残留分别为0.033μg·g-1和0.010μg·g-1,分别占检出样的60.99%和34.62%.DDTs降解率指示区域58%表层土壤为新近输入区,新近输入区在调查区中南部分布尤为明显;而p,p'-DDD/p,p'-DDE指示区域DDTs降解以氧化环境为主,o,p'-DDT/p,p'-DDT指示71.37%区域土壤DDTs输入可能与工业级DDTs有关.相关分析表明,影响土壤DDTs分布的外在因素包括土壤Org C、N、C和p H等指标,且DDTs中p,p'-DDT组分占比越高,影响越明显.DDTs的空间分布具明显点源特征,市县周围均出现明显浓集中心,中南部部分区域浓度明显较高.全区DDTs土壤环境质量污染程度较低,主要以一二类土壤为主,分别占78.95%和21.05%.     

宁波三江口水域原核生物群落结构分析

首次应用16S rRNA基因-Illumina Miseq高通量测序技术对甬江流域宁波三江口区域的表层水体原核生物群落进行了分析,共获得215 504条高质量序列.多样性指数分析表明,该流域的水体原核生物群落具有较高的遗传多样性和丰富度.菌群分类分析发现,β-变形菌纲(β-Proteobacterium)、放线菌门(Actinobacteria)和拟杆菌门(Bacteroidetes)是主要的优势菌群,其相对丰度占总群落的78.88%.对比不同站位的原核生物群落,发现水文环境可能是影响三江口水域原核生物群落组成和结构的重要因素之一.与以往报道对比分析表明,甬江流域分布有多种污水和粪便污染指示菌,其中余姚江污染指示菌的丰度最高,说明其受污染的风险可能较高.病原菌BLASTN分析表明,在种和亚种水平上,分别检出76和18种潜在病原菌,占序列总量的2.19%和0.40%.本研究为系统认识甬江流域原核生物群落结构及生态功能提供了重要基础数据.     

微生物对汞矿区农田土壤汞甲基化的影响

为研究典型汞矿区农田土壤中汞的甲基化作用,实验以受汞污染的旱田土壤和稻田土壤为对象,分别进行灭菌,促进硫酸盐还原菌(SRB)活性处理,抑制SRB活性处理以及促进铁还原菌(FeRB)活性处理,分析非微生物作用和微生物作用对土壤甲基汞(MeHg)生成的影响.结果表明,促进SRB活性处理的土壤MeHg生成量最高,其中旱田土MeHg增量为0.15~0.38μg·kg~(-1),稻田土壤MeHg增量为1~2μg·kg~(-1);抑制SRB活性处理和促进FeRB活性处理的MeHg增量较小,最高值仅为0.025μg·kg~(-1).相比于旱田土壤,稻田土壤具有更高的汞甲基化能力,其MeHg生成量是旱田土壤的4~9倍.土壤SRB数量与MeHg生成量具有相同的变化趋势,二者具有显著的正相关性(R~2=0.57,P0.01).因此,该研究区土壤汞甲基化作用主要是微生物汞甲基化作用,且主要的汞甲基化细菌是SRB.此外,稻田是农田中MeHg生成的活跃地区,在评估和控制MeHg对人体健康危害时需要重点关注.     

微生物燃料电池改性阳极处理PTA废水

探讨了不同改性阳极对微生物燃料电池(microbial fuel cell,MFC)产电性能及其对MFC处理难降解废水能力的影响.以单室空气阴极为基础,利用0.1 g电气石、质量分数75%二氧化锰/埃洛石纳米管(manganese bioxide/halloysite nanotube,MnO_2/HNT)和多壁碳纳米管-羧基(multi-walled carbon nanotube-carboxyl,MWCNT-COOH)对MFC阳极进行修饰.结果表明,不同改性阳极的MFC对含精对苯二甲酸(purified terephthalic acid,PTA)废水的去除率均高于70%,且化学需氧量(chemical oxygen demand,COD)去除率在79%以上.相较于其他几种改性阳极,以MWCNT-COOH改性材料作阳极的MFC产生的最大输出电压最高,获得的最大功率密度最高,分别为529 mV和252.73 mW·m~(-2).     

西安市重污染与清洁天PM2.5组分及其活性氧物质对比

针对重霾污染,在西安市冬季重污染日(2015-11-30~2015-12-09)和清洁日(2016-01-13~2016-01-22)各进行了为期10d的PM_(2.5)采集,测量其中的有机碳、元素碳,及NH_4~+、NO_3~-、SO_4~(2-)等无机水溶性离子,探讨两种污染条件下的组分特征及其成因.结果表明:观测期,重霾日和清洁日PM_(2.5)质量浓度分别为(170±47.5)μg·m~(-3)和(48.6±17.9)μg·m~(-3),且重霾日伴随低能见度、高湿静风等多种不利气象条件;重霾日二次无机离子(NH_4~+、NO_3~-、SO_4~(2-))组分占PM_(2.5)质量浓度的49.8%±13.1%,而清洁日为19.4%±5.95%,并且重霾日硫氧化速率(sulfur oxidation ratio,SOR)和氮氧化速率(nitrogen oxidation ratio,NOR)分别为0.282±0.157和0.269±0.124,远高于清洁日(SOR和NOR分别为0.189±0.057和0.077±0.046),重霾日二次有机组分浓度[(6.22±3.87)μg·m~(-3)]是清洁日[(1.44±1.63)μg·m~(-3)]的5倍,表明二次污染及不利气象条件是造成重霾期间相关组分浓度升高的重要原因.最后,通过二氯荧光黄双乙酸盐(2',7'-DCFH)化学荧光分析法测定了其中活性氧物质(reactive oxygen species,ROS)的浓度,探讨其对于二次无机组分形成的影响,结果表明观测期ROS平均浓度(以H_2O_2计)分别为(4.99±1.54)nmol·m~(-3)(重霾期),(0.492±0.356)nmol·m~(-3)(清洁期),二次反应及积累效应可能是西安重霾条件下ROS浓度升高的主要原因.NO_3~-、SO_4~(2-)与ROS均呈现正相关(P0.05),表明ROS可能通过二次氧化过程参与到二次无机组分形成过程中.     

泉州市大气PM2.5镧系元素组成特征及来源解析

2014年3月、4月和7月分别采集了泉州市5个采样点共49个PM_(2.5)样品,采用电感耦合等离子体质谱(ICP-MS)测定样品镧系元素(Loid)及其他微量金属元素浓度水平.分析了PM_(2.5)镧系元素组成特征和配分模式,利用La-Ce-V三元图和化学质量平衡(CMB)受体模型解析了泉州市大气PM_(2.5)污染来源.结果表明:(1)泉州市大气PM_(2.5)总镧系元素(Σ Loid)浓度为2.490~5.708 ng·m~(-3)(含量65.682~126.529μg·g~(-1)),轻重镧系元素比值(L/H)为12.086~14.319;(2)PM_(2.5)镧系元素配分模式与福建土壤相似,PM_(2.5)中Ce元素表现为正异常,而Eu元素表现为负异常;(3)城市扬尘、燃煤尘、汽车尾气尘和垃圾焚烧飞灰是泉州市大气PM_(2.5)的主要来源,贡献率分别为18.9%、10.9%、30.6%和30.2%.     

Performance of low temperature Microbial Fuel Cells (MFCs) catalyzed by mixed bacterial consortia

Microbial Fuel Cells(MFCs) are a promising technology for treating wastewater in a sustainable manner. In potential applications, low temperatures substantially reduce MFC performance. To better understand the effect of temperature and particularly how bioanodes respond to changes in temperature, we investigated the current generation of mixed-culture and pure-culture MFCs at two low temperatures, 10°C and 5°C. The results implied that the mixed-culture MFC sustainably performed better than the pure-culture(Shewanella) MFC at 10°C, but the electrogenic activity of anodic bacteria was substantially reduced at the lower temperature of 5°C. At 10°C, the maximum output voltage generated with the mixed-culture was 540–560 m V, which was 10%–15% higher than that of Shewanella MFCs. The maximum power density reached 465.3 ± 5.8 m W/m~2 for the mixed-culture at10°C, while only 68.7 ± 3.7 m W/m~2 was achieved with the pure-culture. It was shown that the anodic biofilm of the mixed-culture MFC had a lower overpotential and resistance than the pure-culture MFC. Phylogenetic analysis disclosed the prevalence of Geobacter and Pseudomonas rather than Shewanella in the mixed-culture anodic biofilm, which mitigated the increase of resistance or overpotential at low temperatures.     

Ethanol mediated As(III) adsorption onto Zn-loaded pinecone biochar: Experimental investigation, modeling, and optimization using hybrid artificial neural network-genetic algorithm approach

Organic matters (OMs) and their oxidization products often influence the fate and transport of heavy metals in the subsurface aqueous systems through interaction with the mineral surfaces. This study investigates the ethanol (EtOH)-mediated As(III) adsorption onto Zn-loaded pinecone (PC) biochar through batch experiments conducted under Box–Behnken design. The effect of EtOH on As(III) adsorption mechanism was quantitatively elucidated by fitting the experimental data using artificial neural network and quadratic modeling approaches. The quadratic model could describe the limiting nature of EtOH and pH on As(III) adsorption, whereas neural network revealed the stronger influence of EtOH (64.5%) followed by pH (20.75%) and As(III) concentration (14.75%) on the adsorption phenomena. Besides, the interaction among process variables indicated that EtOH enhances As(III) adsorption over a pH range of 2 to 7, possibly due to facilitation of ligand–metal(Zn) binding complexation mechanism. Eventually, hybrid response surface model–genetic algorithm (RSM–GA) approach predicted a better optimal solution than RSM, i.e., the adsorptive removal of As(III) (10.47 μg/g) is facilitated at 30.22 mg C/L of EtOH with initial As(III) concentration of 196.77 μg/L at pH 5.8. The implication of this investigation might help in understanding the application of biochar for removal of various As(III) species in the presence of OM.     

Shifts in microbial community structure and diversity in a MBR combined with worm reactors treating synthetic wastewater

The chemical oxygen demand (COD) and NH₃-N removal, membrane fouling, sludge characteristics and microbial community structure in a membrane bioreactor (MBR) coupled with worm reactors (SSBWR) were evaluated for 210 days. The obtained results were compared to those from a conventional MBR (C-MBR) operated in parallel. The results indicated that the combined MBR (S-MBR) achieved higher COD and NH₃-N removal efficiency, slower increase in membrane fouling, better sludge settleability and higher activities of the related enzymes in the activated sludge. Denaturing gradient gel electrophoresis was used to analyze the microbial community structures in the C-MBR and the S-MBR. The microbial community structure in the S-MBR was more diverse than that in the C-MBR. Additionally, the slow-growing microbes such as Saprospiraceae, Actinomyces, Frankia, Clostridium, Comamonas, Pseudomonas, Dechloromonas and Flavobacterium were enriched in the S-MBR, further accounting for the sludge reduction, membrane fouling alleviation and wastewater treatment.