公路立交景观设计研究

对立交景观设计的内容、原则、立交的规划布局与总体造型、立交线形景观设计、立交桥跨景观设计进行了论述。     

Impact of improving vehicle front design on the burden of pedestrian injuries in Germany,the United States,and India

Objective: European car design regulations and New Car Assessment Program (NCAP) ratings have led to reductions in pedestrian injuries. The aim of this study was to evaluate the impact of improving vehicle front design on mortality and morbidity due to pedestrian injuries in a European country (Germany) and 2 countries (the United States and India) that do not have pedestrian-focused NCAP testing or design regulations.

Methods: We used data from the International Road Traffic and Accident Database and the Global Burden of Disease project to estimate baseline pedestrian deaths and nonfatal injuries in each country in 2013. The effect of improved passenger car star ratings on probability of pedestrian injury was based on recent evaluations of pedestrian crash data from Germany. The effect of improved heavy motor vehicle (HMV) front end design on pedestrian injuries was based on estimates reported by simulation studies. We used burden of disease methods to estimate population health loss by combining the burden of morbidity and mortality in disability-adjusted life years (DALYs) lost.

Results: Extrapolating from evaluations in Germany suggests that improving front end design of cars can potentially reduce the burden of pedestrian injuries due to cars by up to 24% in the United States and 41% in India. In Germany, where cars comply with the United Nations regulation on pedestrian safety, additional improvements would have led to a 1% reduction. Similarly, improved HMV design would reduce DALYs lost by pedestrian victims hit by HMVs by 20% in each country. Overall, improved vehicle design would reduce DALYs lost to road traffic injuries (RTIs) by 0.8% in Germany, 4.1% in the United States, and 6.7% in India.

Conclusions: Recent evaluations show a strong correlation between Euro NCAP pedestrian scores and real-life pedestrian injuries, suggesting that improved car front end design in Europe has led to substantial reductions in pedestrian injuries. Although the United States has fewer pedestrian crashes, it would nevertheless benefit substantially by adopting similar regulations and instituting pedestrian NCAP testing. The maximum benefit would be realized in low- and middle-income countries like India that have a high proportion of pedestrian crashes. Though crash avoidance technologies are being developed to protect pedestrians, supplemental protection through design regulations may significantly improve injury countermeasures for vulnerable road users.     

飞机典型液压管路系统减振优化计算方法研究

目的研究管道走向和卡箍位置对管道应力的影响。方法以飞机典型液压管路系统为优化对象,对管路系统及支持结构进行动力学参数化建模,使用MATLAB和MSC.NASTRAN构筑基于遗传算法的自动减振优化计算平台,以管壁结构和飞机支持结构的动态应力响应最小为优化目标,对管路走向(包括拐折位置、曲率半径)、卡箍位置进行优化计算,从而建立一种飞机管路系统设计中的自动减振优化计算方法。结果使用建立的减振优化计算平台优化计算设计后,飞机典型液压管路系统最大动态应力值降低了50%。结论提供的优化方法能够有效地通过优化管道布置参数降低应力水平。     

高温高压高含CO2环境下两种氟橡胶密封可靠性评价

目的 研究两种氟橡胶O型圈在总压为25 MPa,CO2体积分数为5%,温度为120 ℃,液相介质Cl^?质量浓度为7000 mg/L的高温高压高含CO2工况下的密封可靠性。方法 通过高温高压釜模拟井下实际工况,采用自研橡胶O型圈密封装置实现试样的承压状态,以物理性能、腐蚀形貌和抗渗透性能为考察指标,对两种氟橡胶O型圈的耐蚀性能和密封性能进行测试评价。结果 氟硅橡胶O型圈在承压状态下腐蚀后,拉伸强度由18.1 MPa下降为13.4 MPa,拉断伸长率由172.8%下降为151.9%。AFLAS橡胶O型圈在承压状态下腐蚀后,拉伸强度由21 MPa下降为14.6 MPa,拉断伸长率由277%下降为212.3%,硬度从84HA下降为75.5HA,表面破损严重。两种橡胶O型圈抗渗透性能随压差增大、温度上升而减弱。结论 承压状态下,两种橡胶O型圈性能衰减程度低于自由状态,氟硅橡胶O型圈在承压状态下表现出更好的密封可靠性。     

生物膜法光发酵制氢的研究现状与展望

21世纪被誉为氢能世纪.光发酵制氢作为绿色可持续生物制氢方式的一种,可以利用独特的光合系统固定太阳能,并利用有机物产生清洁能源氢气,因而受到广泛关注.但光发酵细菌凝集力差、底物转化效率和光能利用率低导致产氢效能下降,从而阻碍了光发酵制氢的发展.光发酵细菌可以通过形成生物膜而被有效固定,进而增加反应器内光发酵细菌的生物持有量,提高光发酵细菌对不利环境的抵抗力;同时,光发酵细菌形成生物膜后可以调控产氢细菌新陈代谢和生理活性使其更利于产氢.其中,光发酵生物膜反应器的设计尤为重要,尤其是反应器内光源的均匀分配对于光发酵制氢是一项关键因素,需要对光源设计、空间摆放和遮光性进行综合分析和设计;其次,需要考虑载体性质和载体安装以充分吸附光发酵细菌并形成生物膜;同时,结合未来可持续绿色发展的需求,光发酵生物膜反应器设计需要逐步过渡到以室外环境作为常规环境和太阳作为光源.尽管光发酵生物膜制氢前景良好,但目前对于光发酵生物膜反应器和制氢机制的研究仍然不够充分,需要更加深入地探索和优化以突破光发酵制氢的瓶颈,推动氢能行业的发展.     

某机载设备隔振安装设计分析与试验研究

目的提高机载设备典型U型谱环境下的抗振性能。方法采用数值法分析典型U型谱的隔振响应分析,确定隔振系统参数,设计隔振系统的刚度和阻尼,最后通过试验验证隔振器的性能及使用寿命。结果通过分析确定了给定典型U型谱的隔振设计最佳固有频率段为70~130 Hz,完成了某机载设备用隔振器的载荷计算,刚度和阻尼设计,并用试验验证了隔振器的性能及耐久性能。结论所设计的隔振系统满足该机载设备隔振安装的性能和振动耐久性要求,有效地提高了机载设备在U型振动谱环境下的抗振性能。     

Reorienting job crafting research: A hierarchical structure of job crafting concepts and integrative review

Two dominant perspectives of job crafting—the original theory from Wrzesniewski and Dutton ( 2001 ) and the job demands resources perspective from Tims, Bakker, and Derks ( 2012 )—remain separate in research. To synthesize these perspectives, we propose a three‐level hierarchical structure of job crafting, and we identify the aggregate/superordinate nature of each major job crafting construct. The first level of the structure is job crafting orientation, or approach versus avoidance crafting, which we argue is an essential yet often neglected distinction in the literature. We address the debate surrounding cognitive crafting and identify crafting form (behavioral versus cognitive crafting) as the next hierarchical level of constructs. Finally, we concur that job resources and job demands, or crafting content, capture different ways that individuals craft their jobs. Using this integrated hierarchical structure, we were able to review antecedents and outcomes from both perspectives. We show, for example, that approach crafting in its behavioral form is very similar to other proactive behaviors in the way it functions, suggesting a need for closer synthesis with the broader proactive literature, whereas avoidance crafting appears to be less proactive and often dysfunctional. On the basis of our review, we develop a road map for future research.     

基于模糊综合评价-集值统计法的大型商场外因火灾风险性分析

大型商场火灾发生的原因多种多样,且易造成严重的后果和恶劣的社会影响。为了提高大型商场火灾风险性等级并且为其评价研究提供一种更加合理的评价方法,采用将2级模糊综合评价与集值统计法相结合的模型对大型商场外因火灾的风险性进行评价。根据相关法律法规并借鉴已有研究成果,充分考虑外因火灾的特点(主要从消防设施及能力因素、消防安全管理因素、人员应急疏散因素3个方面进行分析),建立针对大型商场外因火灾的评价指标体系,其中二级指标包括3个,三级指标包括12个。利用集值统计法将评价指标的描述表示为一段区间值,进而确定各评价指标的权重,并对得出的权重进行可靠性分析,采用加权平均模型确定火灾风险性总的相对隶属度,并求出模糊特征向量;最后根据总得分确定火灾的风险性等级。利用该方法对沈阳某大型商场外因火灾危险性进行了评价分析,并与传统的评价方法(层次分析法)相对比,其评价结果都为"二级(好)",表明该方法的评价结果合理。同时分析得到了大型商场火灾防控的薄弱环节,并提出了相应的有效改进措施。     

基于钻孔数据煤矿开采地表沉陷预计

开采沉陷引起的环境损害评价是环评工作中的重要内容,现有预计软件基本不适应在大面积环评工作中开展沉陷预计工作。针对现有问题,以矿区钻孔数据为基础,基于Delaunay三角形剖分算法建立了煤层开采地表沉陷预计模型。通过设计对比试验,验证了新建模型预计结果较传统的预计方法更加符合实际地表沉陷情况,预计结果的可靠性较高。将该模型运用到工程实例中,可以节省人力资源,使煤矿生态环评从原来以定性分析、半定量预计为主的状况,提高到以定量预测为主的高度,更好地为矿区生态环境保服务。     

FMEA and consideration of real work situations for safer design of production systems

Production equipment designers must ensure the health and safety of future users; in this regard, they augment requirements for standardizing and controlling operator work. This contrasts with the ergonomic view of the activity, which recommends leaving operators leeway (margins for manoeuvre) in performing their task, while safeguarding their health. Following a brief analysis of design practices in the car industry, we detail how the Failure Modes and Effects Analysis (FMEA) approach is implemented in this sector. We then suggest an adaptation that enables designers to consider real work situations. This new protocol, namely, work situation FMEA, allows experience feedback to be used to defend the health standpoint during designer project reviews, which usually only address quality and performance issues. We subsequently illustrate the advantage of this approach using two examples of work situations at car parts manufacturers: the first from the literature and the second from an in-company industrial project.