Urban sustainable energy development: A case study of the city of Philadelphia

Cities throughout the world are key sites for energy sustainability activities. However, analysis of such efforts to date has focused on a sub-set of atypical cities: early adopters and/or world cities. This article undertakes a case-study analysis for an ordinary city, Philadelphia, PA in order to assess the extent to which prior research provides adequate policy explanation for ordinary cities and to gain empirical insight on two under-researched aspects: policy actors, and the policy-making and implementation sites (action sites) for urban energy sustainability. Overall, the types of policy drivers, modes of governance, and enabling factors and barriers in the Philadelphia case fit with prior studies. Focusing on actors and action sites, however, offers insight on the city’s relative policy-making approach based on “non-controversy”, the key role of third-sector actors in both policy-making and implementation, and the diversification of action sites through external-level policy-making operationalised locally nevertheless at the expense of reduced control by urban actors. These findings lead to recommendations for urban energy sustainability research and practice.     

Blowing policy bubbles: rethinking emissions targets and low-carbon energy policies in the U.K.

The issue of proportionality is central to climate policy debates about setting targets for the reduction of greenhouse gas emissions and the development of low-carbon energy. In effect, these debates centre on whether the perceived social costs outweigh the benefits of policies and, if not, whether this may lead to over-investment or ‘policy bubbles’. Political attention, agenda setting and policy image are all crucial drivers of ambitious policy formation, as seen in the case of the United Kingdom's (U.K.) Climate Change Act (2008). However, as political salience waned and economic depression dragged on, the cost of long-term climate targets has been reconsidered. Based on documentary analysis and 33 interviews with central political actors, this article presents a detailed account of how economic arguments have been used to reinterpret and challenge policies, using the heuristics of ‘over-investment’ and ‘policy bubbles’. Ultimately, arguments about proportionality hinge on which costs and benefits are considered. In the U.K., economic and technical framings are typically prioritised, but they do not explain contradictory and politically motivated policy decisions. We discuss these dynamics within the context of maturing renewable energy technologies, high energy prices and the U.K.’s cross-party consensus approach to climate politics.     

The impact of the electricity tariff reform on renewable energies and energy efficiency investments: The case of the Italian residential market

This article investigates the impact that the electricity tariff reform is likely to have on investments in renewable energies (i.e., photovoltaics) and the adoption of energy efficiency measures (i.e., installation of heat pumps and efficient home appliances) in the residential market in Italy. The study develops detailed cost comparisons and simulations considering two different investment scenarios (before and after the reform) to conclude that the reform will: (i) have a negative impact on investments in photovoltaic systems; (ii) favor the adoption of energy efficiency measures, such as efficient home appliances.     

Application of treated wastewater and digested sewage sludge to obtain biodiesel from Helianthus annuus L. seeds oil

Waste from wastewater treatment plants (WWTP) for Helianthus annuus L. production may be a viable solution to obtain biodiesel. This study achieved two objectives: assess the agronomical viability of waste (wastewater and sludge) from the Alcázar de San Juan WWTP in central Spain for H. annuus L. production; use H. annuus L. seeds grown in this way to obtain biodiesel. Five study plots, each measuring 6 m × 6 m (36 m²), were set up on the agricultural land near the Alcázar de San Juan WWTP. Five fertilizer treatment types were considered: drinking water, as the control; treated wastewater; 10 t ha^?1 of air-dried sewage sludge; 20 t ha^?1 of air-dried sewage sludge; 0.6 t ha^?1 of commercial inorganic fertilizer. Soil, irrigation water, sewage sludge, crop development and fatty acid composition in achenes oil were monitored. The 20 t ha^–1 dose of sewage sludge proved effective to grow H. annuus L. with similar results to those grown with a commercial fertilizer. However, precautions should be taken when irrigating with wastewater because of high salinity and nutrient deficiency. Sunflower oil was composed mostly of linoleic and oleic acid. The remaining fatty acids were linolenic, estearic, nervonic, palmitoleic, and palmitic.     

Comparison of the daily global solar radiation from different data sources in Northwest China climate

The solar radiation data are of high importance to the solar energy systems. Conventional methods to obtain the solar radiation data are from weather stations, solar radiation models, commercial software databases, and field measurements. In the present study, a new daily global solar radiation model is proposed, by combining the quadratic function of sunshine fraction and sine function of the day of the year. The solar radiation model calculated data are then compared with China Meteorological Data Sharing System (CMDSS) data, TRNSYS data, and field-measured data in Northwest China climate. It is found that the newly proposed solar radiation model has better performance than the other nine solar radiation models in the literature. The solar radiation model calculated data fit well with the CMDSS annually average data. The TRNSYS data are a bit larger than the CMDSS annually average data in summer half year and a little smaller than those in winter half year. The solar radiation model and the CMDSS annually average data have the best correlation, whereas the TRNSYS data and the field-measured data have the worst correlation. The solar radiation model calculated data have the best correlation with the other three data sources.     

A case study of an isolated wind powered electricity system meeting 100% of local demand

Using meteorological and electricity demand data for a 4-year period, electricity demand in Shetland was modeled to provide an estimate of the demand over a 30-year period from 1 January 1981. That modeled demand was then compared to estimated wind power output over the same period using the WAsP model. The wind farm output was estimated for a range of sizes of wind farm up to the consented 370 MW Viking Wind Farm in Shetland. Some wind power was available for 94% of the time and the 370 MW wind farm would meet 100% of demand for nearly 80% of the time. The statistics of single and accumulated deficits were calculated for a range of wind farms and estimates of the amount of additional generation capacity and additional power requirements were assessed. The study suggests that with storage, wind power in Shetland could meet all electricity demand in Shetland at around £130 to £150/MWh (excluding subsidy) and with a grid connection allowing the sale of excess power, those costs could be reduced.     

Experimental investigations on regeneration energy and energy management strategy in series hydraulic/electric synergy system

This research work draws an insight into the experimental investigations on a series hydraulic/electric synergy system—a green transportation system. An experimental test rig of the system with all necessary sensors and instrumentation has been developed to study the energy saving through hydraulic regenerative braking. The effect of various system parameters, such as braking time, maximum accumulator pressure, pre-charge pressure of hydro-pneumatic accumulator, volumetric displacement of the hydraulic master pump, and hydraulic regeneration pump on the quantum of regeneration energy, was analyzed. In addition, an AMESim model of the real-time experimental test rig has been developed and validated with experimental results. A set of five different experimental designs (parameter variations) of the system is defined with the available standard component sizes. The best design is selected of the available experimental designs based on the maximum hydraulic regeneration energy and regeneration efficiency. It was observed that the selected design has an energy efficiency of 13.3% and a regeneration efficiency of 43.8%. An accumulator-centric control strategy for energy management is developed and implemented on the experimental test rig configured with the selected design. The effectiveness of the control strategy is tested through experiments and simulation on the developed test rig.     

新型烟囱的节能效果与分析

介绍了一座80m烟囱由径向进气方式改为弧形切向进气的工程案例。列出了烟囱改造前后引风机运行一日的能耗数据,对比分析得出采用弧形烟道具有一定的节能效果,探讨了采用弧形烟道烟囱降低能耗的基本原因。     

中国2030年CO2排放总量预测研究

我国2005年和2010年CO2排放总量分别为55亿t和81.52亿t,“十五”和“十一五”期间年均增长率分别为11.0％和8.0％.中国2011-2015年、2016-2020年、2021-2025年和2026-2030年GDP年均增长率分别为8％、7％、6％、5％的经济发展模式与对应的能源消费弹性系数分别为0.5、0.5、0.4和0.3的能源发展模式,预测2030年燃煤、燃油和天然气CO2排放量及全国CO2排放总量.提出减少CO2排放总量对策,主要包括：调整能源结构,尽量减少煤炭消费量占能源消费总量的比例,增加石油、天然气和新能源的比例,提高CO2综合利用率,完善CO2管理政策与法律法规等.     

基于微电荷法的烟气颗粒物浓度检测技术及其应用

目前针对烟气颗粒物浓度的检测方法较多,但均存在不足。详细分析了基于微电荷法的烟气颗粒物浓度检测技术的基本原理和关键的技术难点,介绍了由于微处理器、数字电子技术和材料科学等的飞速发展带来的技术革新,技术的进步为其应用开拓了更为广泛的应用领域并逐步在工业场合得到推广。