Size and resin fractionations of dissolved organic matter and trihalomethane precursors from four typical source waters in China

Dissolved organic matter (DOM) and its potential to form disinfection by-products (DBPs) during drinking water treatment raise challenges to water quality control. Understanding both chemical and physical characteristics of DOM in source waters is key to better water treatment. In this study, the DOM from four typical source waters in China was fractionated by XAD resin adsorption (RA) and ultrafiltration (UF) techniques. The trihalomethane formation potential (THMFP) of all fractions in the DOM were investigated to reveal the major THM precursors. The fraction distributions of DOM could be related to their geographical origins in a certain extent. The dominant chemical fraction as THM precursors in the DOM from south waters (East-Lake reservoir in Shenzhen and Peal rivers in Guangzhou) was hydrophobic acid (HoA). The size fraction with molecular weight (MW) <1 kDa in both south waters had the highest THMFP. The results of cluster analysis showed that the parameters of fractions including DOC percentage (DOC%), UV₂₅₄%, SUVA₂₅₄ (specific UV₂₅₄ absorbance) and THMFP were better for representing the differences of DOM from the studied waters than specific THMFP (STHMFP). The weak correlation between SUVA₂₅₄ and STHMFP for either size or XAD fractions suggests that whether SUVA₂₅₄ can be used as an indicator for the reactivity of THM formation is highly dependent on the nature of organic matter.     

Thiolsulfonate functionalized polystyrene resin： Preparation and application in the isolation and identification of electrophilic mutagens

A new approach for isolation and identification of elecrtophilic mutagens from complex matrix was developed.Thiosulfonic anion was immobilized onto polystyrene beads and used as separation media.Potassium polystyryl-thiosulfonate,prepared from polystyryl- sulfonyl chloride and KHS,was observed to selectively react with model electrophilic mutagens such as alkyl halides,α-chloroketones andα-chloroesters to produce polystyryl-thiosulfonic esters.After separation from other nonreactive organic compounds,the beads then reacted with ethanethiol to produce unsymmetrical ethyl disulfides which are easily detected by GC/MS.For one mutagenic compound,only one unsymmetrical disulfide was found to contain its structure part.Thus,the structure of the parent mutagens could be deduced from that of the unsymmetrical disulfides.The degree of functionaiization of the potassium polystyryl-thiosulfonate resin was 1.11 mmol/g.Its reactivity was discussed and its recycling method was reported here.     

用废旧电路板热解油制备酚醛树脂

在碳酸钙存在下,采用热解技术将废旧电路板中的树脂转化为富含酚的热解油,然后直接加入甲醛溶液反应制备热解油型酚醛树脂,实现了废旧电路板中树脂的再生,酚醛树脂的性能结构类似于氨催化的酚醛树脂。实验结果表明：在n（甲醛）：n（热解油）为1．8～2．1的条件下,无需外加催化剂,在60,80,90℃下分别反应30min制备的热解油型酚醛树脂的性能最佳,且可满足GB／T14732—93《木材工业胶黏剂用脲醛、酚醛、三氧氰胺甲醛树脂》中层压材料用酚醛树脂产品的相关标准。     

Fenton试剂处理电厂离子交换树脂再生废水

采用 Fenton试剂对电厂离子交换树脂再生废水进行催化氧化处理 ,实验结果表明 ,当溶液 p H=2 .0、H2 O2 ( 30 % )投加量为 6 0 m L/L、F e SO4· 7H2 O投加量为 4.5 g/L、H2 O2 投加次数为 4、反应时间为 1.5 h时 ,废水的处理效果最佳     

大孔吸附树脂对烷基酚聚氧乙烯醚的吸附行为

烷基酚聚氧乙烯醚(APEOn)是一类重要的非离子表面活性剂,由于其生物代谢产物被证实具有较大的毒性,因此引起人们广泛关注.本文使用两种不同的大孔吸附树脂XAD-4、NDA-804对APEOn类物质NP10进行吸附,该技术可为使用大孔吸附树脂去除此类污染物提供理论依据.研究结果表明:XAD-4、NDA-804对NP10都有较好的吸附效果,温度对吸附有较大的影响,升高温度吸附量增大.NDA-804对NP10的吸附效果要好于XAD-4,这与它的化学特性以及孔结构有关.NP1O在两种树脂上的吸附都能用Langmuir吸附等温线方程很好的拟合,表明属于单层分子吸附.吸附热力学参数计算结果表明,XAD-4、NDA-804对NP10的吸附过程是吸热和自发的.吸附动力学拟合结果表明,NP10在XAD-4、NDA-804上的吸附都符合假二级反应动力学.     

核电厂凝结水精处理后置过滤器设置必要性分析

核电厂尤其是AP1000核电厂对二回路水质中的SO2-4控制非常严格,而精处理系统破碎树脂泄漏到二回路中高温分解是引起二回路SO2-4超标的一个重要原因。为了减少破碎树脂泄漏量,提出在精处理系统的混床后设置后置过滤器,并对后置过滤器设置的必要性进行了分析,为核电厂精处理系统的设计提供参考。     

攀钢六号烧结烟气脱硫树脂脱盐工艺参数优化研究

针对攀钢六号烧结烟气脱硫树脂脱盐工艺中存在的脱氯效率低、脱硫剂夹带损耗严重的现状,在现场开展了树脂脱盐工艺参数的优化研究工作。通过对树脂脱盐各步骤工艺参数的优化改进,有效地提高了树脂脱盐的脱氯效率及降低了脱硫剂损耗,为脱硫系统的高效、稳定运行奠定了基础。     

季铵型树脂的合成及其对水中溴酸根及前驱物溴离子的吸附性能与机制

水中的溴离子(Br^-)和溴酸根离子(BrO₃^-)由于难挥发、易溶解、稳定性好而难以除去,因此,制备了一种对较低浓度的Br^-和BrO₃^-都有良好吸附去除效果的季铵碱树脂(Quaternary ammonium base resin,QABR)并表征了其物化结构.同时,考察了初始浓度、QABR投加量、溶液pH、离子强度、吸附接触时间和吸附温度等因素对QABR吸附Br^-和BrO₃^-性能的影响.结果表明,在0.05～4.00 mmol·L^-1浓度范围内,在298 K、pH=7.0时QABR对Br^-和BrO₃^-的吸附能力最佳,其最大吸附量分别为1.78 mmol·g^-1和1.65 mmol·g^-1;QABR对Br^-和BrO₃     

环氧树脂材料的老化及防老化研究进展

重点阐述了关于环氧树脂的物理老化、热氧老化、湿热老化、光氧老化等老化行为及老化机理的国内外研究进展。结合环氧树脂老化的内外因及其老化作用机理,总结了添加有机小分子稳定剂或无机纳米粒子以及与聚合物共聚共混改性等老化防护方法的研究现状。指出了目前微观原位检测技术在环氧树脂老化机理研究上应用不足的问题,并对环氧树脂的老化防护方法进行了展望。     

基于多通道原位红外光谱技术的环氧涂层恒温固化反应研究

目的 拓展多通道原位红外光谱技术的应用,探究环氧树脂在固化行为中的分子结构变化以及不同固化深度下的动力学参数与恒温固化模型。方法 采用多通道原位红外光谱的表征方法,对N,N,O-三缩水甘油基对氨基苯酚(环氧树脂AFG-90)与甲基纳迪克酸酐(MNA)的环氧涂层的固化过程进行30、40、50、60、70 ℃等5个温度下的原位红外光谱监测,基于特征官能团吸光度的变化,研究恒温固化模型。结果 通过特征官能团吸光度与温度、时间的关系,计算得出AFG-90与MNA的环氧树脂固化体系在不同温度下的固化模型、达到不同固化度下的固化时间,求解得在不同固化深度下的活化能Ea主要在58~74 kJ/mol变化,且其均值为69.43 kJ/mol。结论 获得了AFG-90与MNA的环氧树脂固化体系在固化过程中动力学参数和模型,同时试验结果表明,多通道原位红外光谱技术是研究高分子材料固化反应动力学的有效表征方法。