多氨基树脂的制备表征及其对水中酚类化合物的吸附机制

通过沉淀聚合法制备了三交联型的聚马来酸酐树脂(Polymaleic anhydride resin,PMAR),然后氨化接枝得到系列衍生的多氨基树脂,并采用红外光谱(FTIR)、Zeta电位、元素分析、扫描电镜(SEM)和N₂吸附/解吸(BET)等手段对其进行了表征.对系列多氨基树脂的吸附性能进行比较发现,该系列树脂对4-硝基苯酚(4-NP)的吸附能力随氨基数量的增加而增加,其中以氨基数最多的四亚甲基五胺修饰的聚马来酸酐树脂PMAR-VA吸附性能最好.在各种酚类化合物中,PMAR-VA树脂对4-NP具有较高的选择性.同时,研究了树脂投加量、溶液pH、离子强度等因素对水中4-N吸附性能的影响,并对吸附过程进行了吸附动力学模拟,发现吸附过程符合拟二级动力学模型.Langmuir等温吸附模型可以很好地描述PMAR-VA对溶液中4-NP的吸附过程,最大吸附量为77.1 mg·g^-1(pH=6.0和25 ℃).吸附热力学结果表明,4-NP在PMAR-VA上的吸附是一个自发的物理吸附过程,其吸附机制主要为静电吸引和氢键.脱附再生实验发现,0.2 mol·L^-1 NaOH溶液脱附效果最优.经5次循环再生使用,PMAR-VA树脂的吸附性能没有明显下降.     

Comparison of different combined treatment processes to address the source water with high concentration of natural organic matter during snowmelt period

The source water in one forest region of the Northeast China had very high natural organic matter (NOM) concentration and heavy color during snowmelt period. The efficiency of five combined treatment processes was compared to address the high concentration of NOM and the mechanisms were also analyzed. Conventional treatment can hardly remove dissolved organic carbon (DOC) in the source water. KMnO₄ pre-oxidization could improve the DOC removal to 22.0%. Post activated carbon adsorption improved the DOC removal of conventional treatment to 28.8%. The non-sufficient NOM removal could be attributed to the dominance of large molecular weight organic matters in raw water, which cannot be adsorbed by the micropore upon activated carbon. O₃ + activated carbon treatment are another available technology for eliminating the color and UV₂₅₄ in water. However, its performance of DOC removal was only 36.4%, which could not satisfy the requirement for organicmatter. The limited ozone dosage is not sufficient to mineralize the high concentration of NOM. Magnetic ion-exchange resin combined with conventional treatment could remove 96.2% of color, 96.0% of UV₂₅₄ and 87.1% of DOC, enabling effluents to meet the drinking water quality standard. The high removal efficiency could be explained by the negative charge on the surface of NOM which benefits the static adsorption of NOM on the anion exchange resin. The results indicated that magnetic ion-exchange resin combined with conventional treatment is the best available technology to remove high concentration of NOM.     

Chemical identification and genotoxicity analysis of petrochemical industrial wastewater

The actual harmful effects of industrial wastewater can not be reflected by the conventional water quality index. Therefore, the change in dissolved organic matter and the genetic toxicity of petrochemical wastewater were observed in the current study by examining the wastewater treatment plant of a large petrochemical enterprise in Northwest China. Using XAD-8, MSC, and DA-7 resins, the wastewater was separated into six fractions, namely, hydrophobic acid (HOA), hydrophobic neutral (HOB), hydrophobic alkaline, hydrophilic acid, hydrophilic alkaline, and hydrophilic neutral. Umu-test was used to detect the genetic toxicity of the wastewater samples, and fluorescence spectra were also obtained to examine genetic toxic substances. The results show that wastewater treatment facilities can effectively reduce the concentration of organic matter in petrochemical wastewater (p<0.05). However, the mixing of aniline wastewater can increase the amount of organic carbon (p<0.05) and can overload facilities. This finding shows that the mixed collection and joint treatment of different types of petrochemical wastewater can affect the water quality of the effluent. Particularly, hydrophobic substances can be difficult to remove and account for a relatively large proportion of the effluent. The mixture of aniline wastewater can increase the genetic toxicity of the effluent (p<0.05), and biologic treatment can not effectively decrease the toxicity. Most of the genetic toxicology may exist in the HOA and HOB fractions. Fluorescence spectroscopy also confirms this result, and tryptophan-like substances may play an important role in genetic toxicity.     

黄浦江原水中各类有机物在铝盐混凝过程中的去除效果

通过XAD-8/XAD-4吸附树脂联用技术将黄浦江微污染原水中溶解性有机物分为疏水酸、非酸疏水物质、弱疏水物质及亲水物质4类有机物,研究了铝盐混凝工艺对黄浦江水中4类有机物的去除效果.硫酸铝在最佳混凝条件下,即投加量为8 mg·l~(-1)(以Al计),pH=5.5时,水中的DOC和UV_(254)的去除率分别达到23%和32%.有机物的亲疏水性对混凝工艺有较大影响,混凝法倾向于优先去除水中疏水性有机物,而疏水性有机物的酸碱性对混凝工艺没有明显影响,酸性和非酸类疏水物质均能破混凝工艺所去除.疏水酸是水中最主要的三氯甲烷类消毒副产物的前体物质,混凝工艺对于三氯甲烷类消毒副产物有良好的控制作用,总体减少了 39%的生成量.而不同类的有机物之间,混凝工艺对消毒副产物控制效果不同,其中对疏水酸的控制三氯甲烷消毒副产物的效果最好,减少了63%的生成量,亲水物质的控制效果最差,三氯甲烷生成量仪减少了3%.疏水酸表现出比亲水物质更强的生物毒性,混凝工艺能明显降低原水的毒性.     

三种不同树脂对硫辛酸吸附行为的研究

通过静态吸附实验,研究了XAD-4,NDA-100和ND-90树脂对乙醇．水溶液中硫辛酸的吸附热力学及动力学特性．结果表明：硫辛酸在XAD-4树脂上是单层吸附,符合Langmuir等温吸附方程,吸附过程符合准一级动力学吸附方程．在NDA-100和ND-90树脂上的吸附也符合Langmuir等温吸附方程,但并不只是单层吸附,同时兼有毛细管凝聚和微孔填充作用,吸附过程可分为大孔和中孔区吸附以及微孔区吸附两个阶段,两个阶段都符合准一级动力学吸附方程．     

膜型树脂在土壤养分测试中的应用进展

回顾了离子交换树脂在土壤养分测试中的应用及其发展变迁的3个阶段;综述了国内外离子交换树脂膜（膜型树脂）的研究进展;同时对该技术未来应用的前景及其进一步发展存在的问题进行了讨论。     

CL-5209微色谱柱分离富集光度法测定环境样品中微量铀

研究了ＣＬ５２０９萃淋树酯微色谱柱柱性能以及对铀和主要伴生元素的分离富集情况。结果表明,在１ｍｏｌ／Ｌ硝酸介质中,除铀（Ⅵ）、钍（Ⅳ）、金（Ⅲ）和少量稀土元素能被ＣＬ５２０９萃淋树酯吸附外,其它常见共存元素不被吸附。用５ｍｌ１ｍｏｌ／Ｌ的ＨＮＯ３可以安全淋洗除去钍和少量稀土,再用１４ｍｌ混合掩蔽剂可以完全解析铀,结合以在溴代十六烷基吡啶存在下５Ｂｒ－ＰＡＤＡＰ显色,能快速准确地测定环境样品中ｐｐｂ级铀     

超声波树脂联用法提取活性污泥中的胞外聚合物

考察了超声波树脂联用法提取活性污泥中胞外聚合物的影响因素,确定了最佳提取条件.试验结果表明,树脂量为60 g/g VSS,在摇床振摇强度250 r/min下处理4 h,再进行超声处理2 min,EPS提取量接近理论含量,即污泥干重的15%,与阳离子树脂法相比,EPS提取物中DNA的百分含量较低,即对细胞的破坏程度更小,说明超声波树脂联用法稳定、高效,是一种较佳的提取方法.     

吸附硝基苯酚的超高交联树脂微波辅助再生研究

以NDA-150超高交联树脂为吸附剂,邻硝基苯酚为吸附质,氢氧化钠稀溶液为脱附剂,采用微波间歇辐照脱附的方法,对吸附了邻硝基苯酚树脂的再生过程进行了研究。实验结果表明,采用多次、短时间微波辐照时,脱附体系温升速率随初始温度的不断升高而降低;利用这一特点对脱附体系进行辐照,可有效避免体系内“热点”现象的出现。邻硝基苯酚的脱附率随微波辐照时间的增加平缓上升,却随脱附剂浓度的增加而迅速上升,再生过程受脱附剂在树脂孔道内的扩散控制。树脂经多批次微波辐照,吸附性能和化学结构保持稳定。     

除铬优势菌胞外聚合物的提取过程优化

采用阳离子交换树脂法对除铬(Ⅵ)优势菌(Brevibacillussp.)株的胞外聚合物(EPS)的提取过程进行优化,以得到EPS的最佳提取条件。综合考察树脂量、振摇频率、提取时间3个主要因素对优势菌胞外聚合物的影响。结合阳离子交换树脂对EPS的交换吸附机理,对3个提取条件下,EPS及其成分的提取量的变化趋势进行分析。结果表明,菌株经28℃、150 r/min、24 h培养后,确定阳离子交换树脂法提取优势菌EPS的最佳条件为树脂量30 g,振摇频率140 r/min,提取时间9 h,此条件下的EPS提取量为40.84μg/mL。