Assessment of the clear-sky bias issue using continuous PM10 data from two AERONET sites in Korea

A bias in clear-sky conditions that will be involved in estimating particulate matter(PM)concentration from aerosol optical depth(AOD) was examined using PM_(10) from two Aerosol Robotic Network sites in Korea. The study periods were between 2004 and 2007 at Anmyon and between 2003 and 2011 at Gosan, when both PM_(10) and AOD were available. Mean PM_(10) when AOD was available(PM AOD) was higher than that from all PM_(10)data(PM all) by 5.1 and9.9 μg/m~3 at Anmyon and Gosan, which accounted for 11% and 26% of PM all, respectively.Because of a difference between mean PM_(10) under daytime clear-sky conditions(PM clear)and PM AOD, the variations in ΔPM_(10), the difference of PM all from PM clear rather than from PM AOD, were investigated. Although monthly variations in ΔPM_(10)at the two sites were different, they were positively correlated to those in ΔT, similarly defined as ΔPM_(10)except for temperature, at both sites. ΔPM_(10)at Anmyon decreased to a negative value in January due to an influence of the Siberian continental high-pressure system while ΔPM_(10)at Gosan was high in winter due to an effect of photochemical production at higher temperatures than at Anmyon.     

新型重金属絮凝剂巯基乙酰化羟甲基聚丙烯酰胺的优化制备

为提高含铜废水的处理效果及简化处理流程,以聚丙烯酰胺(PAM)、甲醛、氢氧化钠、巯基乙酸(TGA)为原料,先经羟甲基化反应制备中间产物羟甲基聚丙烯酰胺(MPAM),再通过酰胺化反应将巯基接枝到MPAM分子链上,制备出新型重金属絮凝剂巯基乙酰化羟甲基聚丙烯酰胺(MAMPAM).以水样中Cu(Ⅱ)的去除率为考察目标,采用Plackett-Burman实验、最陡爬坡实验和响应面法中CCD实验优化MAMPAM的制备条件.结果表明,MAMPAM最优制备条件为:MPAM浓度0.31%、MPAM与TGA物质的量比为1∶3.2、反应介质p H值为4.76、反应温度为25℃、反应时间为2 h,在此条件下制备的MAMPAM对Cu(Ⅱ)的去除率为95.30%,与模型的理论预测值94.47%接近,相对偏差仅为0.83%,模型合理可靠.红外分析表明MPAM分子链上成功接上了巯基.MAMPAM对不同初始浓度的含Cu(Ⅱ)水样具有很好的去除效果,Cu(Ⅱ)去除率均能达到90%以上.MAMPAM有望成为一种有效的含铜废水处理剂,具有一定的应用前景.     

一种低功耗高性能数据采集数字处理平台的设计

目的构建一套基于中频信号基带数字信号处理的软件无线电平台。方法通过选择芯片设计硬件电路设计出合适的PCB板。结果主要依据软件无线电平台,提出了一种基于A/D+FPGA+D/A的硬件设计方案,该系统包括了前端的A/D数据采集和后端的D/A模拟数据恢复的详细收发电路原理设计。结论构建了一个从前端数据接收到后端模拟发送的高速基带数字信号处理平台。     

热带海洋大气环境下X70管线钢的缝隙腐蚀行为研究

目的研究X70管线钢在热带海洋大气实海环境下的缝隙腐蚀行为。方法在距离湛江东海岛海岸50m和200 m处分别搭建楔型缝隙模型,安装大气环境Cl-收集装置和自动气象监测站。结果距离海岸越近,风速越大,大气中Cl-沉降速率也越大,X70管线钢缝隙腐蚀越严重。X70管线钢在距离海岸50 m处发生缝隙腐蚀的最大缝宽约为0.96 mm,200 m处最大缝宽约为3.75 mm,50 m处缝隙腐蚀更严重。结论缝隙腐蚀区域形成了氧浓差电池,同时随着缝隙液中Cl-向缝隙内迁移,发生闭塞区电池自催化过程,在二者共同作用下,缝隙腐蚀区域较非缝隙腐蚀区域腐蚀更严重。     

极低风速条件下水-气界面甲烷气体传输速率分析

薄边界层理论被广为用来计算水-气界面气体通量,而气体传输速率(k600)则是其中的关键性环境因子.为了研究极低风速下小型浅水湿地水-气界面甲烷气体传输速率,以宜昌饮用水水库梅子垭水库和周邻5个富营养化池塘为研究对象,采用静态通量箱进行了为期一年的水-气界面甲烷气体通量观测,同步监测了水环境因子和气象因子.野外监测时的风速(U10)范围为0~0.75 m·s~(-1),平均值约为0.19 m·s~(-1);水温(Tw)变化范围为6.3~30.9℃,平均值约为19.3℃.结果表明,梅子垭水库和周边5个池塘水-气界面甲烷气体传输速率较小,在0.20~1.99 cm·h~(-1)之间变化,平均值约为0.50 cm·h~(-1).本研究利用表层水温和风速指标两个参数的双二次项模型和二次项加幂函数模型,回归得到了气体传输速率的数学公式,回归结果与原始数据和对k600进行深度平均(bin-averaged)后的数据均存在极显著性关系.     

菌株Pseudomonas sp. JF122降解苯酚同时还原Cr(VI)的条件优化及生长特性研究

采用富集培养法,从钢铁厂附近河流污泥中分离筛选到1株能同时降解苯酚与还原Cr(VI)的菌株JF122.在600 mg·L^-1苯酚与1.2 mg·L^-1 Cr(VI) 的条件下,采用单因素实验考察了温度、初始pH、该菌接种量等因素对其同时降解苯酚与还原Cr(VI)的影响,并通过正交试验L₉(3³)获得适宜的苯酚降解与Cr(VI)还原条件.结果表明,菌株JF122降解苯酚与还原Cr(VI)的适宜条件为:30 ℃、初始pH=6和接种量1%,此条件下,菌株JF122在56 h内能够降解600 mg·L^-1苯酚同时还原1.2 mg·L^-1 Cr(VI).应用响应曲面法建立了菌株JF122的生长与温度、初始pH、接种量等因素间关系的数学模型,并对其生长条件进行了优化.结果表明,菌株JF122最优生长条件与其降解苯酚并同时还原Cr(VI)的最优条件具有一致性.     

Modulation-assisted high speed machining of compacted graphite iron (CGI)

The application of controlled, low-frequency modulation (～100 Hz) superimposed onto the cutting process in the feed-direction – modulation-assisted machining (MAM) – is shown to be quite effective in reducing the wear of cubic boron nitride (CBN) tools when machining compacted graphite iron (CGI) at high machining speeds (>500 m/min). The tool life is at least 20 times greater than in conventional machining. This significant reduction in wear is a consequence of the multiple effects realized by MAM, including periodic disruption of the tool–workpiece contact, formation of discrete chips, enhanced fluid action and lower cutting temperatures. The propensity for thermochemical wear of CBN, the principal wear mode at high speeds in CGI machining, is thus reduced. The tool wear in MAM is also found to be smaller at the higher cutting speeds (730 m/min) tested. The feed-direction MAM appears feasible for implementation in industrial machining applications involving high speeds.     

昆明市环境应急监测能力建设现状及对策建议

结合昆明市环境应急监测能力建设的现状,着重分析存在的主要问题,提出了相应的对策建议。     

基于时频分析的裂纹转子碰摩故障特征研究

为研究转子系统耦合故障特性,采用有限元方法建立了含有横向裂纹、转静碰摩的非线性转子动力学模型。首先研究了不同转速下裂纹、碰摩单一故障下转子系统的振动响应,其次研究了两种故障耦合情况下系统的振动响应特征。采用波形图、FFT谱图、瞬时频率和Hilbert-Huang时频谱(HHS)相结合的方法对故障转子振动信号进行了分析。分析结果表明:运用多种时频分析相结合的方法可以较为全面地了解转子的故障特征,裂纹转子在1/5、1/3临界转速时会发生较为明显的5X、3X谐波,且裂纹的产生会导致响应幅值增大,从而引起更为严重的碰摩。      

气象条件对上甸子地区气溶胶散射特征的影响

利用北京地区上甸子站气溶胶散射系数、PM2.5质量浓度和气象要素1 a的观测资料,研究不同天气条件下上甸子地区散射系数的变化特征,并讨论了气象条件对散射系数的影响.结果表明,散射系数在雾霾天最高608.4 Mm-1,其次为雾天500.6 Mm-1和霾天423.7 Mm-1,是一般天气散射系数的6.4～9.2倍.在各类天...