环境空气中VOC s 的监测技术新进展

大气中的挥发性有机物(VOCs)严重威胁着人类的健康,目前对它的监测技术的研究越来越多.文章综述了近年来国内外在VOCs的采样及测试技术上的进展,重点介绍了固相微萃取、罐取样、吸附法等采样技术以及以气相色谱法为主的分析方法,并对一些非色谱法的分析技术进行了简单介绍.     

Collaborative emergency management: better community organising, better public preparedness and response

Community coordination requires communication and planning of precautions to take when faced with a severe threat of disaster. The unique case of the four Florida hurricanes of 2004--Charley, Frances, Ivan, and Jeanne--is used here to assess community responses to repeated threats of hurricanes. The paper examines how effectiveness in coordinating community disaster response efforts affects future public preparedness. The findings suggest that pre-season planning, open communication between emergency managers and elected officials, and the use of technology all had a significant impact on community responses. The repeated threat scenario indicates that emergency managers must work vigilantly to keep residents informed of the seriousness of a situation. The study describes how emergency managers in Florida countered public complacency during four hurricanes in six weeks. The strategies identified as useful by public managers in the context of hurricanes are applicable to other natural and man-made disasters.     

柑桔高接换种技术

从品种筛选、砧穗选择、嫁接时期与方法、嫁接部位与接芽数量,以及配套管理等方面阐述了柑桔高接换种的技术.     

秸秆腐解剂在秸秆还田中的效果研究初报

在大田、微区和盆栽条件下,研究了秸秆腐解剂对小麦、水稻生长及产量的影响,同时研究了秸秆腐解剂对小麦、水稻秸秆腐解速率及对土壤肥力的影响。结果表明,稻、麦秸秆还田时施用秸秆腐解剂对提高稻、麦产量具有明显的增产效果,增产的原因是穗数和粒数增加;稻、麦秸秆还田量不同时,还田量大且配施秸秆腐解剂的效果较还田量小好;麦秸秆还田方式不同时,麦秸以栽稻前耕翻还田且配施秸秆腐解剂的效果较好,上水沤制的效果较差;秸秆腐解剂能促进稻、麦秸秆较快腐解,减轻和防止多量秸秆还田给作物生长带来不利影响,并可稳定和提高土壤养分含量。     

太湖蓝藻水华时空分布与预警监测响应的分析

选择2007和2008年200幅EOS/MODIS太湖蓝藻监测遥感影像,统计分析了梅梁湾、竺山湾宜兴段、贡湖湾、东太湖胥口湾和湖州方向湖体蓝藻水华爆发的空间和时间分布规律。并在得出全太湖蓝藻水华空间和时间分布规律的基础上,从环境监测部门蓝藻预警监测工作的实际出发,将蓝藻水华预警监测的响应划分为常规监测和应急监测,提出了具体的监测要求,为环太湖地区的相关部门更好地开展蓝藻预警监测工作提供了科学依据。     

高效脱硫菌的筛选及其性能研究

从高硫污染的活性污泥中富集培养,分离纯化得到一株可以降解噻吩的菌株s_4,并对该菌株的形态特征进行观察。应用Design—Expert8．0．5b软件进行响应面优化实验,研究了反应时间、噻吩浓度、微生物浓度3个因素的组合对菌株s_4脱硫效果的影响,并拟合得到多元二次回归方程,得出最佳实验条件。拟合结果表明,当反应时间27．46h,噻吩浓度为1．04％,微生物浓度4．04％时,预测噻吩降解率为14．8％,通过验证得最佳条件下的降解率为14．3％,与预测值相符。     

气动锤头式冲击响应谱模拟方法研究

分析了目前常用的机械撞击式响应谱试验机的特点和存在的一些问题,设计了一种以压缩空气作为锤头动力的新型气动式冲击响应谱试验机,给出了锤头速度计算公式和响应谱最大值的估算方法,为大型产品的冲击响应谱试验提供了一种手段。     

Distribution and bioavailability of ceria nanoparticles in an aquatic ecosystem model

Along with the increasing utilization of engineered nanoparticles, there is a growing concern for the potential environmental and health effects of exposure to these newly designed materials. Understanding the behavior of nanoparticles in the environment is a basic need. The present study aims to investigate the distribution and fate of ceria nanoparticles in an aquatic system model which consists of sediments, water, hornworts, fish and snails, using a radiotracer technique. Concentrations of ceria in the samples at regular time intervals were measured. Ceria nanoparticles were readily removed from the water column and partitioned between different organisms. Both snail and fish have fast absorption and clearance abilities. Hornwort has the highest bioaccumulation factors. At the end of the experiment, sediments accumulated most of the nanoparticles with a recovery of 75.7 ± 27.3% of total ceria nanoparticles, suggesting that sediments are major sinks of ceria nanoparticles.     

响应曲面法优化复合絮凝剂的制备工艺

为了提高染料废水中COD和色度的去除效果,采用响应曲面法对聚硅酸类新型复合絮凝剂的制备工艺进行了优化实验研究。在单因素实验基础上采用Box-Behnken Design(BBD)实验设计方法,设计出了影响染料废水处理效果的3因素3水平共15组实验,其中n(Fe+Al):n(Si)的摩尔比为4～6,n(B+Mg):n(Si)的摩尔比为0.3～0.7,熟化时间为1～3 d。根据15组实验结果,以COD去除率和色度去除率为响应值分别建立了二次多项式响应曲面模型。模型优化结果显示,在n(Fe+Al):n(Si)摩尔比为5∶1,n(B+Mg):n(Si)为0.5∶1,熟化时间为2 d的条件下,制备得到的新型复合絮凝剂聚硅酸铝铁硼镁具有最佳的絮凝处理性能和脱色效果,能有效去除染料废水中的COD和色度,其中出水色度接近于0,COD的去除率达到87.65%,模型验证实验进一步验证了本文所建立的响应曲面法在复合絮凝剂制备工艺优化中的有效性。     

脂肽类生物表面活性剂液体发酵条件的响应面优化

通过Plackett-Burman和Box-Behnken实验对解淀粉芽孢杆菌XZ-173液体发酵生产表面活性素进行了响应面优化研究。首先使用Plackett-Burman实验对影响表面活性素产量的17个因素进行显著性筛选,结果表明,MnSO4、CuSO4、温度和转速为显著性因素。再运用Box-Behnken实验对这4个显著因素的取值进一步优化,得到各因素优化后的数值分别为4.4 mg/L(MnSO4)、0.18 mg/L(CuSO4)、29℃(温度)和163 r/min(转速)。响应面分析结果表明:该菌株产生表面活性素的最佳培养基为:葡萄糖15 g/L,蛋白胨5 g/L,L-谷氨酸钠6 g/L,KH2PO40.8 g/L,MgSO40.4 g/L,KCl 0.4 g/L,酵母提取物3 g/L,L-苯丙氨酸2.5 mg/L,MnSO44.4 mg/L,CuSO40.18 mg/L,FeSO40.12 mg/L;最适培养条件:pH 7.5,温度29℃,转速163 r/min,接种量5%,装液量50 mL/250 mL,摇床培养36 h。在优化后的条件下,表面活性素实际产量为336 mg/L,实际实验结果与模型预测结果相一致。表面活性素采用HPLC技术分离,发现其在浓度仅为50 mg/L时EI24就可达到70%以上,反映了表面活性素优异的乳化活性以及广阔的应用前景。