路面径流生态阻控技术研究——以改性麦饭石透水沥青路面为例

为强化透水沥青路面对路面径流中氮、磷的控制效果,采用铁盐联合碱热技术制备了涂层负载改性麦饭石蓄水层集料,并运用场发射扫描电子显微镜(SEM)、能谱分析仪(EDS)和X射线衍射(XRD)等手段对改性后麦饭石集料的表面形态、特征和化学成分进行了表征.同时,通过静态吸附试验对TP的吸附效果及其作用机理进行了对比研究.最后将改性麦饭石作为蓄水层集料应用于透水沥青路面中,通过模拟降雨和周期蓄水试验探究其净化机制.结果表明:相比于天然麦饭石,铁盐联合碱改性麦饭石的表面性状发生了明显变化,最大饱和吸附容量明显提高,对氨氮和磷酸盐的吸附容量分别从1.32 mg·g~(-1)和1.48 mg·g~(-1)提升到12.82 mg·g~(-1)和6.38 mg·g~(-1);降雨全过程中改性蓄水层路面对NH~+_4-N的整体去除效率可提高20%左右,对TP的净化效率至少可提高15%,蓄水阶段较模拟降雨阶段污染物的去除效果显著提高,改性后麦饭石蓄水层24 h后的出水水质均可达III类水标准,强化蓄水层和提高蓄水时间是提高路面径流净化效率的有效措施.因此,本实验中铁盐联合碱热技术制备的改性麦饭石可推荐用于海绵城市生态处理设施透水沥青路面中削减氨氮和总磷的污染负荷.     

2015~2018年中国代表性城市PM2.5浓度的城乡差异

选取中国6大城市群中的11座代表性城市为研究区域,将监测站点划分为城区、郊区和乡村站,进而分析各城市间PM_2.5浓度的城乡差异规律.结果表明,同一城市群各城市之间,或同一城市的城区、郊区、乡村站间PM_2.5日变化皆较为相似.京津冀和长三角地区的城市城区PM_2.5浓度最高,高于郊区7.8%~9.7%,高于乡村11.3%~16.9%,而粤港澳大湾区和内陆城市群（成渝、长江中游、关中平原城市群）的城市郊区PM_2.5浓度最高,高于城区2.6%~11.2%,高于乡村16.7%~26.5%.各城市间城乡PM_2.5浓度差值的日变化规律不尽相同,可呈单峰（如上海）或双峰（如杭州）变化,极值可出现在白天（如广州）,亦可在夜间（如深圳）.PM_2.5的排放与传输扩散共同对11城市城乡PM_2.5浓度分布产生影响.     

Air pollution characteristics and their relationship with emissions and meteorology in the Yangtze River Delta region during 2014–2016

With rapid economic growth and urbanization, the Yangtze River Delta(YRD) region in China has experienced serious air pollution challenges. In this study, we analyzed the air pollution characteristics and their relationship with emissions and meteorology in the YRD region during 2014–2016. In recent years, the concentrations of all air pollutants, except O_3,decreased. Spatially, the PM_(2.5), PM_(10), SO_2, and CO concentrations were higher in the northern YRD region, and NO_2 and O_3 were higher in the central YRD region. Based on the number of non-attainment days(i.e., days with air quality index greater than 100), PM_(2.5) was the largest contributor to air pollution in the YRD region, followed by O_3, PM_(10), and NO_2.However, particulate matter pollution has declined gradually, while O_3 pollution worsened.Meteorological conditions mainly influenced day-to-day variations in pollutant concentrations. PM_(2.5) concentration was inversely related to wind speed, while O_3 concentration was positively correlated with temperature and negatively correlated with relative humidity.The air quality improvement in recent years was mainly attributed to emission reductions.During 2014–2016, PM_(2.5), PM_(10), SO_2, NO_x, CO, NH_3, and volatile organic compound(VOC)emissions in the YRD region were reduced by 26.3%, 29.2%, 32.4%, 8.1%, 15.9%, 4.5%, and0.3%, respectively. Regional transport also contributed to the air pollution. During regional haze periods, pollutants from North China and East China aggravated the pollution in the YRD region. Our findings suggest that emission reduction and regional joint prevention and control helped to improve the air quality in the YRD region.     

TAGE:一种新的大气污染物来源及输送情况的网格化分析方法

提出了一种新的大气污染物来源及输送情况的网格化分析方法.首先,不依赖于排放源清单,而是以预设的网格化排放源来运行空气质量模型,得到排放源的污染影响因子.然后,结合污染物监测数据,构建排放源总合排放强度求解方程组,并利用遗传算法进行求解.最后,基于排放源的污染影响因子和总合排放强度,计算出排放源的污染贡献占比,从而完成对大气污染物来源及输送情况的网格化分析.这一方法的提出,为缺少准确排放源清单情况下大气污染状况的分析与治理,提供了新的思路.利用此方法,对北京市、石家庄市、保定市2017年10~12月期间PM_2.5的来源及输送情况进行了验证性实验.     

基于Matlab/Simulink的导弹运输振动载荷分析

目的分析导弹在车辆运输中的振动载荷情况,为开展导弹结构可靠性分析和寿命预估提供输入条件。方法根据导弹运输车的动力学模型,利用Matlab/Simulink对不同路况条件下导弹运输车振动响应情况进行仿真计算,获得不同路况和运输车速时的振动响应情况。结果随着路面等级下降和车辆速度的增加,导弹运输车振动的幅值也相应增加。结论滤波白噪声方法模拟得到的时域路面功率谱与标准等级功率谱一致性较好,可以作为振动响应分析的输入激励。     

云南5城市道路扬尘PM2.5中重金属含量表征及健康风险

为研究云南城市道路扬尘PM_2.5中重金属含量、来源和其健康风险,分别在昆明、保山、文山、昭通和玉溪这5个典型城市区域采集道路扬尘样品,使用颗粒物再悬浮技术将尘样悬浮并采集PM_2.5,利用ICP-MS检测PM_2.5中铬(Cr)、锰(Mn)、镍(Ni)、铜(Cu)、锌(Zn)、砷(As)、镉(Cd)和铅(Pb)等8种重金属.结果表明,5城市道路扬尘Cr、 Ni、 Cu、 Zn和Pb含量均严重超过云南土壤背景值;富集因子表明,云南5城市道路扬尘PM_2.5中重金属多数表现为中度富集和强烈富集,受人为活动影响较大.相关性分析和主成分分析结果表明,云南省不同类型城市道路扬尘PM_2.5中重金属均受土壤源和交通源影响;其余来源差异性较大：昆明受钢铁冶炼源影响、保山和玉溪受有色金属冶炼源影响、昭通受燃煤源影响.健康风险分析表明：昆明、玉溪和昭通的道路扬尘PM_2.5中Cr、 Pb和As存在儿童非致癌风险,昆明市的Cr还存在终身致癌风险.     

高速公路建设与区域城镇分布的相互影响初探--以山东省为例

本文在介绍山东省高速公路发展概况的基础上，对其发展速度、规模及布局做了初步评价，同时以现有的交通网络格局为基础，结合各城市2001年的GDP数量和所处的地理环境的差异，划分出城镇密集区与稀疏区，分析评价了高速公路路网结构与城镇分布的相互关系。并分析了高速公路的空间布局与山东省城镇分布和扩展方向的相互影响。     

A review and numerical assessment of the random walk particle tracking method

We review the basic mathematical concepts of random walk particle tracking (RWPT) and its advantages and limitations. Three different numerical approaches to overcome the local mass conservation problem of the random walk methodology are examined: (i) the interpolation method, (ii) the reflection principle, and (iii) the generalized stochastic differential equations (GSDE). Analytical solutions of the spatial moments for a two-layer system are compared to model predictions using the different techniques and results demonstrate that the interpolation method reproduces correctly average velocity, but fails to reproduce macrodispersion at higher hydraulic conductivity contrasts between the two layers. On the contrary, the reflection principle and the GSDE approach underestimate average velocity, but reproduce macrodispersion better for high contrasts. The different behavior is based on an artificial shift of mass for increasing heterogeneities for the GSDE approach and the reflection principle, whereas the interpolation method suffers from the smoothing of the dispersion tensor. The behavior of these approaches was furthermore analyzed in two-dimensional heterogeneous hydraulic conductivity fields, which are characterized by different random function models. Solute transport was simulated correctly by all three approaches for the reference fields having Gaussian structures or non-Gaussian structures with an isotropic spatial correlation, even for a variance of the natural log of hydraulic conductivity of sigma(lnK)(2)=4. However, for the non-Gaussian model with a strong anisotropic spatial correlation and a variance of sigma(lnK)(2)=2 and higher, the interpolation method was the only technique modelling solute transport correctly. Furthermore, we discuss the general applicability of random walk particle tracking in comparison to the standard transport models and conclude that in advection-dominated problems using a high spatial discretization or requiring the performance of many model runs, RWPT represents a good alternative for modelling contaminant transport.     

模糊综合评价法在道路运输企业安全评价中的应用

我国道路运输企业交通安全形势比较严峻,推行道路运输企业安全综合评价是降低道路运输企业交通事故的有效途径之一.本文运用Delphi法和AHP法建立了道路运输企业安全层次分析模型,构建了安全综合评价指标体系.选用基于"差动"原理的赋权法--G1法计算各指标的权重,应用模糊综合评价法对其进行安全综合评价.采用平均加权法对评价因素的各项指标进行量化处理,从而得到道路运输企业安全的综合评价结果.最后,对陕西省一家道路运输企业进行了实际验证,比较真实地反映了此企业的安全状况.     

厂内铁路、公路道口信号微机控制系统

介绍了铁路道口信号、公路交通信号并存出现矛盾时的一种解决方法及控制模式,就控制系统的组成、工作原理及特点作了论述,构成的系统具有一定的代表性。运行表明：解决了铁路道口信号与公路交通信号不兼容的问题,有效地保障了铁路道口区域过往车辆及行人的安全,取得了预期的效果。