辽宁矿山固体废弃物对环境影响遥感调查分析

辽宁矿种繁多,矿山固体废弃物产出量巨大。为了加强生态环境建设,在矿山固体废弃物对生态环境影响遥感调查的基础上,论述了矿山固体废弃物调查对象与内容、技术路线与工作方法,并分析了辽宁矿山固体废弃物产出量及矿山固体废弃物对环境的影响。     

危险废物交易信息化体系建设初探

分析了我国目前实施危险废物交易的意义和必要性及危险废物交易现状,提出在危险废物交易还处于市场化运行的初级阶段,引入信息化技术,为危险废物交易同时提供监管和市场化平台,建立健全配套的管理制度和办法,是实现危险废物的循环利用和经济可持续发展的有效途径之一。     

盘锦市农村生活垃圾现状与处理对策

分析了盘锦市农村生活垃圾现状和存在问题,结合盘锦市实际情况及农村生活垃圾处理技术,提出了盘锦市农村生活垃圾处理对策.     

Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets

A modified method of severe plastic deformation (SPD) entitled constrained groove pressing-cross route (CGP-CR) was introduced for imposing a high magnitude of equivalent strain of about 2.32 per pass on the sheet form samples. The major benefit of this improved route compared to previous common route was the more homogeneity of strain in the rolling (RD) and transverse (TD) directions of sheets. In this study, low carbon steel samples were used for examination of evolutions in microstructure and mechanical properties during SPD via CGP-CR process. Mechanical properties improvement were measured by tensile and macro hardness tests. The results indicate that CGP-CR process can effectively improve tensile strength; and also, yield stress and hardness of as-received low carbon steel samples were improved up to about 100% after two deformation passes. Also, high magnitude of inhomogeneity can be observed in hardness distribution through first pass of the process which diminishes in the subsequent passes. Microstructural evolutions during process were monitored by optical microscopy observations and X-ray diffraction analysis. The results demonstrate that initial ferritic microstructure with grain size of about 30 μm was refined to a 225 nm cell structure after two passes of CGP-CR process.     

黑龙江省农村垃圾现状分析及对策

黑龙江省作为中国东北方的农业大省,农村所占比例较大。随着农村经济的快速增长,所产生的垃圾也逐年增多,加之基础设施建设薄弱,缺乏成熟的垃圾处理技术,农村的垃圾问题已经成为我省"农村环境连片整治"必须要解决的一个重点问题。     

火灾下钢框架结构热-力耦合模拟与性能分析

基于"自然火灾安全概念"(NFSC)的基本思想,提出了火灾下钢结构热-力耦合模拟方法。利用ANSYS的参数化设计语言,建立了ANSYS软件与OZone火灾分析软件的数据接口,实现了火灾分析软件与大型有限元软件的耦合运用。基于火灾模拟软件OZone的分析结果,利用APDL语言,对钢框架结构进行了真实火灾场景下的热-力耦合模拟。研究表明:钢框架结构在真实火灾场景下,受非均匀变热流影响,结构内部将产生热应力梯度和应力牵移现象;同时钢框架中钢梁固接时,火灾初期变形较小,当达到某个关键时间点后将开始大的变形破坏,其主要原因是钢框架内部产生塑性铰,即钢梁由固接变为铰接,释放了对钢梁的约束。     

餐厨垃圾国家政策及地方法规研究和思考

文章介绍了餐厨垃圾的产生和危害,以及目前国家及地方在餐厨垃圾处理方面颁布和制定的指导性文件、政策性法规、及行业标准。通过总结苏州、宁波、西宁、乌鲁木齐等城市在治理餐厨垃圾过程中的经验,结合这些地区在餐厨垃圾处理方面的地方法规、收集运输系统、无害化处理体系的建立过程,通过分析思考,提出了适用于一般城市的关于餐厨垃圾收集、运输、处理过程系统性的工作框架。指出了餐厨垃圾处理目前面临的主要问题,并对未来如何推进和完善餐厨垃圾处理工作提出了合理化建议,对政府未来的决策具有一定程度的参考意义。     

好氧颗粒污泥处理青霉素废水研究

青霉素在其生产过中产生大量的废水,其COD值较高,生化性较差,成分复杂,微生物难以降解,其处理技术是世界性难题。文章采用以葡萄糖模拟废水培养的好氧颗粒污泥为接种体,经青霉素废水逐步驯化后,使其完全处理青霉素废水。实验结果表明,应用好氧颗粒污泥技术,处理青霉素废水,COD,NH3_N,TP去除率较高,具有很好的处理效果。     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.     

危险废物回转窑焚烧系统的控制参数分析及调节方法研究

随着我国经济的迅速发展,危险废物产量持续增长,它们带来了严重的社会危害和环境危害。焚烧法是一种高温热处理技术,危险废物通过焚烧处理可实现无害化、减量化和资源化。回转窑焚烧系统具有处置范围广、处理量大、焚毁率高、安全可靠和可长期持续运行等特点,被国内外广泛应用。文章通过分析回转窑焚烧系统的主要控制参数,根据工程运行的实际经验,绘制了回转窑焚烧系统控制参数和焚毁率关系图,并提出了“最佳焚烧区域”的概念,对于回转窑焚烧系统的调试和运行工作,有积极的指导作用和重要的现实意义。