模拟黑麦草根系有机酸参与下炼锌废渣对斑马鱼抗氧化酶和神经毒性的影响

为评价多金属矿山废渣堆场生态修复过程中,废渣在先锋修复植物根系分泌的机酸参与下浸出液对周边环境生物的影响.以斑马鱼（Danio rerio）为受试生物,通过模拟添加典型先锋植物（黑麦草）根系分泌的有机酸（草酸和酒石酸）处理贵州威宁土法炼锌废渣,以废渣浸出液对受试生物抗氧化酶和乙酰胆碱酯酶（AchE）的不同响应为评价指标,研究各处理组对斑马鱼抗氧化系统、神经系统及组织学的影响.结果表明,两种有机酸的参与均会不同程度地降低炼锌废渣浸出液的pH,并导致废渣释放出更多重金属;暴露于有机酸参与的废渣浸出液14 d后,受试生物组织中的抗氧化酶受到显著影响,并因无法克服长时间的氧化应激最终引起丙二醇（MDA）在组织中累积;有机酸参与下废渣浸出液对斑马鱼具有明显的神经毒性,长时间暴露后受试生物出现游动迟缓、呼吸慢和鳃盖张合频率降低的现象;鳃组织存在上皮细胞水肿、增生或脱落、鳃丝充血和鳃小片扭曲或断裂的现象,而肌肉组织中出现更多肌纤维核增大、固缩和碎裂的现象.综上,选用适生性和耐受性较强、根系发达且有机酸分泌量较大的先锋植物来修复多金属废渣场地将可能促进废渣中重金属的释放并引起环境生物抗氧化系统和神经系...     

高能重离子辐照下国产RPV钢A508-3的硬化行为

目的 研究在563 K的温度条件下,高能重离子辐照导致国产RPV钢A508-3的硬化行为。方法 使用回旋加速器提供的352.8 MeV Fe²¹⁺对A508-3钢试样进行辐照,使其依次达到0.15、0.30、1.50 dpa的损伤水平。借助辐照终端的梯度减能装置,在样品表面至25 μm的深度范围内产生一个准均匀分布的原子离位损伤坪区,并使用纳米压痕仪和维氏显微硬度计测量了试样的硬度。结果 考虑到压痕尺寸效应的影响,采用Nix-Gao模型对硬度数据进行拟合,由于高能Fe离子产生了较厚的损伤区,辐照试样中的软基效应明显减弱。辐照后的试样出现明显的硬化现象,且随着辐照剂量的增大,硬化增量有饱和趋势。通过辐照前和辐照至0.15 dpa试样的微硬度数据,得出其与纳米硬度之间的线性关系(Hv0=0.85 H0)。结论 借助A508-3辐照前后的硬度数据,计算发现试样的屈服强度增量与辐照剂量之间存在一种幂函数关系,这为A508-3钢中子-离子辐照硬化的映射关系研究提供了基础数据。     

福州市城市生活垃圾管理体制与政策措施探讨

城市生活垃圾这个与城市“相伴生”的长期污染源,必须得到及时、科学、妥善的处理。福州市目前对城市生活垃圾的治理存在“重末端处理、轻源头控制”,在垃圾末端无害化上陷于被动,却缺少“清洁生产”的理念,“减量化、资源化”未得到应有的重视。本文针对福州市垃圾管理体制与政策上的弊端,强调垃圾的产生、收集、运输、处理等全过程实现全面的、综合的、封闭式管理,探讨法律、经济、管理三位一体的城市生活垃圾管理政策,保障城市可持续发展。     

Exploring full cost accounting approach to evaluate cost of MSW services in India

Municipal solid waste (MSW) services of developing countries often suffer due to the lack of financial and operational autonomy, scientific approach, and adequate levels of resources. The solid waste management (SWM) practices of developed countries are benefited in cost and efficiency due to the participation of private players and sound financial management. However, developing economies depend on local municipalities to own and operate SWM services amidst structural and financial inefficiency. With the demands of augmenting efficient and cost-effective SWM services to the expanding population of cities and towns of newly industrialized nations on the rise, the municipalities in these countries are under pressure to adopt ways and means that can support efficient utilization of resources and improved decision-making capabilities. This research article reflects the current state of the MSW services in India and explores full cost accounting (FCA) framework in its ability to generate information on cost-related aspects and sustainable deployment of resources. Lastly, the extensibility of FCA is tested by integrating externalities of MSW services.     

Critical factors in effective construction waste minimization at the design stage: A Shenzhen case study,China

Construction waste minimization at the design stage is a key strategy in effective waste reduction. However, it seems that few studies focus on exploratory factors that can significantly improve the design of construction waste minimization. This paper addresses this research gap by presenting a set of critical factors that inform and improve the practice of waste minimization design, particularly in the context of Shenzhen, China. Nineteen potential factors which can influence effective waste minimization are presented based on related official guidelines, reports and literature. Top institutions in Shenzhen that have received a Grade A building design certification were surveyed through a questionnaire. From this survey, six critical factors are derived: (1) large-panel metal formworks, (2) prefabricated components, (3) fewer design modifications, (4) modular design, (5) waste reduction investment and (6) economic incentive. The applicability and significance of the identified critical factors for effectively designing waste minimization are also explored. These critical factors not only provide designers and project managers with a useful set of criteria for effective design strategies to reduce construction waste, but also serve as valuable references for the government to formulate related construction waste minimization regulations.     

Assessment of plastic packaging waste: Material origin,methods, properties

The global plastics production has increased annually and a substantial part is used for packaging (in Europe 39%). Most plastic packages are discarded after a relatively short service life and the resulting plastic packaging waste is subsequently landfilled, incinerated or recycled. Laws of several European and Asian countries require that plastic packaging waste collected from households has to be sorted, reprocessed, compounded and reused. These recycling schemes typically produce milled goods of poly(ethylene terephthalate) (PET), poly(ethylene) (PE), isotactic poly(propylene) (PP), mixed plastics, and agglomerates from film material. The present study documents the composition and properties of post-consumer polyolefin recyclates originating from both source separation and mechanical recovery from municipal solid refuse waste (MSRW). The overall composition by Fourier transform-infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC) were determined and compared with the sorting results of the sorted fractions prior to the reprocessing into milled goods. This study shows that the collection method for the plastic packaging waste has hardly any influence on the final quality of the recyclate; however, the sorting and reprocessing steps influence the final quality of the recyclate. Although the mechanical properties of recyclate are clearly different than those of virgin polymers, changes to the sorting and reprocessing steps can improve the quality.     

我国地膜覆盖和残留污染特点与防控技术

地膜覆盖技术已成为我国农业应用最为广泛的农艺技术之一,但同时地膜残留污染也成为影响农业可持续发展的一个重大问题,系统分析梳理地膜覆盖种植技术、地膜残留污染的特点及防控技术对于该技术合理利用具有重要意义。本文在已有工作基础上,系统分析了我国地膜覆盖种植技术应用情况、地膜残留污染特点和防治技术。结果表明,20世纪80年代以来,我国地膜用量及覆盖面积一直呈大幅度上升态势,年增长率在8％左右,1991—2011年20年间,地膜使用强度增加了3～10倍,但存在明显区域差异。总体上,北方省区的地膜使用强度大,增长幅度快。地膜覆盖应用作物也从经济作物扩大到粮食作物,应用面积最大作物依次为玉米、蔬菜、棉花、烟草和花生等。地膜覆盖技术的应用产生了巨大效益,但同时也带来了一系列污染危害。长期覆膜农田土壤中都存在程度不同的残膜污染,残留量一般在71．9-259．1kg·hm-2。西北地区是残膜污染最严重的地区,土壤中残膜量远远高于华北和西南地区。残留地膜大小和形态多种多样,主要有片状、蜷缩圆筒状和球状等,在土壤中呈水平、垂直和倾斜状分布。目前,我国地膜残留污染防治技术滞后,人工回收是普遍和主要的回收形式,其他防治技术如机械回收、节约型地膜应用、生物降解地膜尚未较大规模应用。当前,为防止地膜残留污染进一步加剧,急需修订完善地膜标准和加强质量监管,提高可回收性;推广节约型地膜使用技术和残膜回收技术;开展地膜覆盖技术适应性研究,促进技术合理利用。     

芹菜农药残留监测结果分析

为了解芹菜质量安全现状,对蔬菜批发市场、农贸市场、超市销售的芹菜进行了农药甲胺磷、氧乐果等50项农药的专项抽样调查分析,共抽检芹菜样本213个,通过采用GB2763--2012（食品中农药最大残留限量》进行判定,结果表明：引起芹菜农药残留超标的农药主要为毒死蜱、甲拌磷、多菌灵等,其中由这3种农药引起芹菜超标的比例占农残超标总批次的78．1％,芹菜质量安全状况还需进一步加强。     

垃圾焚烧发电厂脱硝技术及应用

介绍了垃圾焚烧烟气烧脱硝控制的主要技术及应用情况,以及非催化还原技术的应用实例,采用该技术,氮氧化物排放值可满足现阶段排放要求。     

System dynamics model for analyzing effects of eco-design policy on packaging waste management system

EU's long-term objective is to become a recycling and resource effective society, where waste is utilized as a resource and waste generation is prevented. A system dynamics model was developed to analyze the policy mechanisms that promote packaging material efficiency in products through increased recycling rates. The model includes economic incentives such as packaging and landfill taxes combined with market mechanisms, behavioral aspects and ecological considerations in terms of material efficiency (the packaging material per product unit, recycled fraction in products). The paper presents the results of application of various policy instruments for increasing packaging material efficiency and recovery rate and reducing landfilled fraction. The results show that a packaging tax is an effective policy instrument for increasing the material efficiency. It ensures the decrease of the total consumption of materials and subsequent waste generation. The tax helps to counteract a rebound effect, which, as identified by the analysis, can be caused by reduced material costs due to eco-design. The model is applied to the case of Latvia. Yet, the elements and structure of the model developed are similar to waste management systems in many countries. By changing numeric values of certain parameters, the model can be applied to analyze policy mechanisms in other countries.