天津市医疗废物处置规划及策略研究

以天津市医疗废物管理现状为研究对象，对处置方式进行深入探讨，分析目前分散处置和集中处置存在的缺陷，提出“区域集中处置”设想；并运用模糊决策模型理论，建立较完善的处置方式评价指标体系，应用模糊综合评价模型得出“区域集中处置”是最佳的医疗废物处置方式，同时提出了相应的区域集中处置策略。     

活性炭纤维净化印刷过程产生的VOCs废气

介绍了应用局部排气的方法,收集印刷过程的挥发性有机化合物（VOCs）废气,应用活性炭纤维（ACF）吸附脱附有机废气回收净化装置,进行印刷厂VOCs废气的回收与治理,详细描述了印刷车间VOCs废气的收集与处理工艺过程及其效果.测试结果表明,应用此工艺和设备可以有效地进行印刷过程大风量的VOCs废气的回收和治理.     

制浆废液降低普钙水分的应用研究

针对我国采用高临界流动水分的磷矿进行湿法生产普钙普遍存在产品水分达不到部颁标准的难题,直接采用制浆废液(利用其主要对环境有害成分之一--MNA作减水剂)进行降低普钙水分的研究和应用.实验结果表明,添加少量的减水剂MNA可显著降低国内朝阳、昆阳、浏阳和国外摩洛哥等单种磷矿以及昆阳-朝阳混矿的矿浆粘度和水分.采用国产昆阳-朝阳混矿进行工业生产试验结果表明,添加0.35%～0.4%干矿粉重量的减水剂MNA,不仅可使球磨添加水量从145 kg降至103 kg,矿浆含水量从30.5%降至27%,成品肥含水量从16.24%降至13.77%,而且可使有效磷从10.67%升至12.24%,转化率由86.57%提高到90.45%,矿浆细度由90.18%提高到93.12%.实验和工业生产试验表明,直接用造纸制浆废液降低普钙水分,既确保和改善了普钙的产品质量,又治理了环境污染,取得了较好的经济、环境和社会效益.     

好氧预处理农业草类废物的BMP分析和动力学研究

农业草类废物既是一种废弃物，也是一种资源，由于其富含有机质，可通过厌氧生物降解产生沼气。本文研究了农业草类废物的好氧预处理对其固含量成分，生物沼气产生潜力（ＢＭＰ），甲烷浓度，产气速率的影响进行了研究；并计算了作为一级反应的反应速率常数，其结果表明模型与实验值一致性较好。     

白洋淀几种不同食性鱼类对六六六、DDT的富集

对白洋淀几种不同食性鱼体内六六六和ＤＤＴ残留量分析表明，草食性鱼体内农药残留量最少，六六六含量为５９．３μｇ／ｋｇ，ＤＤＴ含量为２９．６μｇ／ｋｇ；其次是杂食性鱼类，六六六含量为９０．４μｇ／ｋｇ，ＤＤＴ含量为１０８．５μｇ／ｋｇ；肉食性鱼体内农药残留量最高，六六六含量为１１０．７μｇ／ｋｇ，ＤＤＴ含量为１２４．４μｇ／ｋｇ。鱼体对ＤＤＴ的浓缩因子为３１１～１２４４，明显高于六六六的１７７～３６８。鱼体内ＢＨＣ４种异构体的残留顺序为δ＞α＞γ＞β，与其在水体中的比例α＞γ＞δ＞β略有不同。鱼体内ＤＤＴ主要以代谢物ｐ，ｐ＇－ＤＤＥ的形式存在，但个别样品中少量的ｐ，ｐ＇－ＤＤＤ及ｏ，ｐ＇－ＤＤＴ的检出，表明白洋淀水生生态系统最近受到ＤＤＴ的轻度污染。本项研果与１９７５～１９７７年检测结果进行比较；白洋淀鱼体内六六六残留量显著下降，下降率为１５．８％～７９．２％；ＤＤＴ残留量却明显增加（草食性鱼类除外），增加率约为４７．８％～９７．８％。     

Model reactor for photocatalytic degradation of persistent chemicals in ponds and waste water

A laboratory scale flow-through model reactor for the degradation of persistent chemicals using titanium dioxide (TiO₂) as photocatalyst immobilized on glass beads is presented. In the test system with a volume of 18 L contaminated water is pumped to the upper part of the floating reactor and flows over the coated beads which are exposed to UV-radiation. The degradation of two dyes of different persistance was investigated. Primary degradation of methylene blue did not fit a first order kinetic due to coincident adsorption onto the photocatalyst and direct photolysis, resulting in a half-life of 6 h. A filtrate of a green algae suspension accelerated the colour removal. In contrast, reactive red 2 was degraded only by photocatalysis; neither adsorption nor direct photolysis led to a colour removal. The course of primary degradation followed a first order kinetic with a half-life of 18 h and a rate constant of 0.04 h⁻¹. Analysis of the degradation products indicated mineralization by detection of NO₂⁻ and NO₃⁻, accompanied by a decrease of pH and an increase of conductivity. A successful adaptation of the model reactor (scale 1:10) to dimensions required for surface waters and waste water treatment plants would be a costefficient and environmentally sustainable application of photocatalysis for the treatment of industrially polluted water and could be of relevance for third world contries, particularly those favoured by high solar radiation.     

Biopesticide and formulation processes based on starch industrial wastewater fortified with soybean medium

Abstract

The aim of this study was to produce Bacillus thuringiensis-based biopesticide using starch-producing industry wastewater (SIW) fortified with soybean medium and optimize the formulated product using different adjuvants. This study was necessary as low endotoxin concentration is obtained in formulated biopesticide when SIW alone is used as fermentation medium. The fermentation runs were conducted using SIW alone and SIW fortified with 25% soybean (w/v) medium in 2000?L and 150?L bioreactor, respectively. SIW supplemented with soybean medium showed an increase in cell count (from 1.95?×?10⁸ to 1.65?×?10⁹ CFU mL^–1), spore synthesis (from 1.5?×?10⁸ to 1.35?×?10⁹ CFU mL^–1) and endotoxin concentration (from 436 to 1170?μg mL^–1) when compared to SIW medium alone. The fermented broth was concentrated using continuous centrifugation and adjuvants were added for biopesticide formulation in order to enhance its resistance against UV rays and rainfastness. Entomotoxicity of the formulation produced using fermented broth of SIW fortified with soybean (38,000?IU μL^–1) was higher than that obtained by SIW medium alone (21,000?IU μL^–1), commercial biopesticide Foray 76B (20,000?IU μL^–1) and Btk sander’s (12,500?IU μL^–1).     

玻纤布上胶车间有机溶剂废气净化处理

介绍了工厂有机溶剂废气处理方案和设计及实际运行效果,具有简单经济、净化彻底的特点.     

中国淘汰滴滴涕的环境影响分析

目前中国仍在生产滴滴涕(DDT),并以其为原料生产三氯杀螨醇作为杀虫剂使用.为评价淘汰DDT对于中国生态环境的影响,采用情景分析的方法,估算了在采取不同的淘汰策略下土壤中DDT残留浓度的变化,以此来评价淘汰DDT的环境影响.与基线情景相比,三种控制情景下DDT的累积生产量都有不同程度的减少,相应土壤中的残留浓度也有不同的下降,且淘汰的速度越快土壤中DDT浓度下降的幅度越大.     

ESPR subject area 5 ‘Environmental Microbiology, (Bio)Technologies, Health Issues’

Goal, Scope and Background  Aquaculture activities are well known to be the major contributor to the increasing level of organic waste and toxic compounds in the aquaculture industry. Along with the development of intensive aquaculture in China, concerns are evoked about the possible effects of everincreasing aquaculture waste both on productivity inside the aquaculture system and on the ambient aquatic ecosystem. Therefore, it is apparent that appropriate waste treatment processes are needed for sustaining aquaculture development. This review aims at identifying the current status of aquaculture and aquaculture waste production in China. Main Features  China is the world’s largest fishery nation in terms of total seafood production volume, a position it has maintained continuously since 1990. Freshwater aquaculture is a major part of the Chinese fishery industry. Marine aquaculture in China consists of both land-based and offshore aquaculture, with the latter mostly operated in shallow seas, mud flats and protected bays. The environmental impacts of aquaculture are also striking. Results  Case studies on pollution hot spots caused by aquaculture have been introduced. The quality and quantity of waste from aquaculture depends mainly on culture system characteristics and the choice of species, but also on feed quality and management. Wastewater without treatment, if continuously discharged into the aquatic environment, could result in remarkable elevation of the total organic matter contents and cause considerable economy lost. Waste treatments can be mainly classified into three categories: physical, chemical and biological methods. Discussion  The environmental impacts of different aquaculture species are not the same. New waste treatments are introduced as references for the potential development of the waste treatment system in China. The most appropriate waste treatment system for each site should be selected according to the sites’ conditions and financial status as well as by weighing the advantages and disadvantages of each system. Strategies and perspectives for sustainable aquaculture development are proposed, with the emphasis on environmental protection. Conclusions  Negative effects of waste from aquaculture to aquatic environment are increasingly recognized, though they were just a small proportion to land-based pollutants. Properly planned use of aquaculture waste alleviates water pollution problems and not only conserves valuable water resources but also takes advantage of the nutrients contained in effluent. It is highly demanding to develop sustainable aquaculture which keeps stocking density and pollution loadings under environmental capacity. Recommendations and Perspectives  The traditional procedures for aquaculture waste treatment, mainly based on physical and chemical means, should be overcome by more site-specific approaches, taking into account the characteristics and resistibility of the aquatic environment. Further research needs to improve or optimize the current methods of wastewater treatment and reuse. Proposed new treatment technology should evaluate their feasibility at a larger scale for practical application. ESS-Submission Editor: Dr. Ding Wang (wangd@ihb.ac.cn)