Wastewater management in small- and medium-size enterprises: case studies

Wastewater management in small and medium-sized enterprises representing the chemical and food industries was investigated. The results showed that wastewater discharged from an ink-production factory was highly contaminated with organic pollutants. Anaerobic biological treatment followed by chemical coagulation using ferric chloride aided with lime proved to be very effective and produced an effluent that complied with national regulatory standard for wastewater discharge into public sewage network. Also, management of wastewater from a confectionery factory representing the food sector was carried out. Aerobic biological treatment using plastic-packed trickling filter proved to be an effective treatment method. However, application of in-plant control measures alleviated the requirement for the construction of a wastewater treatment plant. The applied pollution prevention and cleaner production measures involved good housekeeping, recovery of spent chocolate, modification of floor cleaning and installation of suction devices for the removal of sugar and starch powders. All improvement measures were documented by cost/benefit analysis.     

Economies of scale in global iron-making

In this paper, we investigate the presence of economies of scale in the global iron-making industry for integrated steel plants, iron making being the first stage in the steel-making process. Iron making depends on basic commodities, such as iron ore, coke and various forms of energy, required in the operation of the blast furnace, which can be classified as essential inputs and used in fixed proportions to produce iron. A generalized Leontief cost function is estimated using panel data for 69 integrated plants, such a specification being appropriate for technologies with essential inputs that are used in fixed proportions in production. A significant scale effect is observed due to the existence of fixed costs and a linear dependence of the cost function on production. Under a simple linear cost function, a rough estimate of the breakeven scale of plant, where costs equal revenue, is 4.5 Mt per year. Competitiveness, as measured by the ratio of plant average cost per tonne to best practice cost per tonne, can be shown to be positively related to the scale of production as well as the cost of essential inputs. Therefore, low-cost producers are also often producers with low raw material costs and production levels below the estimated breakeven scale of operation. Labor costs, although significant, are comparatively less important as a driver towards low costs.     

Exploratory Analysis of the Winter Chemistry of Five Lakes on the North Slope of Alaska1

Abstract: Lakes are important water resources on the North Slope of Alaska. Freshwater is required for oilfield production as well as exploration, which occurs largely on ice roads and pads. Since most North Slope lakes are shallow, the quantity and quality of the water under ice at the end of winter are important environmental management issues. Currently, water‐use permits are a function of the presence of overwintering fish populations, and their sensitivity to low oxygen concentrations. Sampling of five North Slope lakes during the winter of 2004‐2005 shed some light on the winter chemistry of four lakes that were used as water supplies and one undisturbed lake. Field analysis was conducted for oxygen, conductivity, pH, and temperature throughout the lake depth, as well as ice thickness and water depth. Water samples were retrieved from the lakes and analyzed for Na, Ca, K, Mg, Fe, dissolved‐organic carbon, and alkalinity in the laboratory. Lake properties, rather than pumping, were the best predictors of oxygen depletion, with the highest dissolved‐oxygen levels maintained in the lake with the lowest concentration of constituents. Volume weighted mean dissolved‐oxygen concentrations ranged from 4 to 94% of saturation in March. Dissolved oxygen and specific conductance data suggested that the lakes began to refresh in May.     

电子封装行业职业有害因素的辨识与分析

从电子封装行业工艺入手,依据国家颁布的职业有害因素分类目录及职业有害因素致病模型,针对电子封装行业插入式(DIP)及表面贴装(QFP/SOIC)制造工艺使用的材料、设备、条件、人员作业特点,对行业内具有共性的职业有害因素进行分析,对工艺过程中存在的职业有害因素作出辨识,并提出把硅粉尘、铅、氩气、高温、环氧树脂、氢氧化钾、噪声、酸雾、重复性静态作业、重复性动态作业等有害因素作为防控重点,为电子封装行业职业有害因素的危害量化评价及其防控措施制定提供了科学依据。     

基于临水区域化工园区的整体安全研究

针对临水区域化工园区的生产特点及在整体安全方面存在的普遍问题,提出在临水区域化工园区内要进行合理布局,做到功能分区明确;同时需建立园区安全生产管理、监测预警及应急处置系统,主要是由固定危险源和移动危险源动态安全管理子系统、安全生产监测预警系统、突发事故应急处置平台等所组成;坚持安全监控信息化与标准化,对化工园区的整体安全性的提高将发挥巨大的作用,为建设"平安园区"打下坚实的基础。     

橡胶促进剂M盐废水生物处理技术研究

为探讨微生物技术在橡胶促进剂M盐废水处理中的应用,利用高效优势蘸强化A2O工艺对橡胶促进剂M盐废水进行处理,整个系统运行过程分为污泥的培养与驯化阶段及稳定运行阶段。在稳定运行阶段COD0平均去除率达90．71％,氨氮平均去除率达78．31％。以Mn^2＋、Fe^2＋、Mg^2＋、Ni^2＋为4个影响因子,通过正交实验分析无机离子对橡胶促进剂M盐废水中有机物降解的促进作用。由实验数据的摄差大小可知,各无机离子对优势复合菌降解橡胶有机废水的影响从大到小依次为：Mn^2＋、Fe^2＋、Ni^2＋和Mg^2＋。4种离子最佳质量浓度组合为：0．500mg／L的Mn^2＋、1．00mg／L的Fe^2＋、35．0mg／L的Mg^2＋和0．025mg／L的Ni^2＋。     

硫酸含汞问题的追踪研究

以辽宁省最大的硫酸生产企业（辽西某锌厂）为研究对象,剖析了硫酸含汞问题的来源,论述了该厂原料、中间产品、最终产品、车间内外环境汞的污染状况。并论述了使用该厂硫酸的十大企业的中间产品、最终产品的含汞状况,给出了厂内外环境受汞污染的测定结果,研究表明含汞硫酸污染问题是急待解决的重要问题。     

近十年生态工程在中国的进展

我国生态工程近 1 0多年有进一步发展 ,研究和应用对象扩展为社会 -经济 -自然复合生态系统 ,目标明确为可持续发展 ,从追求一维的经济增长或环境与自然保护 ,走向富裕、健康、文明三维一体的复合生态繁荣。在充实“整体、协调、循环、自生”的生态工程原理和生态控制论的基础上 ,总结出生态工程设计的 8项原则。方法论发展为从物理过程的量化走向生态过程的序化 ,从工程结构的优化走向生态格局的进化 ,从机器的人工智能走向人的生态智能。技术路线发展了硬件、软件、心件耦合 ;多学科、多技术的系统组合 ;调控复合生态系统全生态过程 ;寓环境保护于生产和消费中 ,寓废弃物处理于利用中 ;结构和功能纵横耦合成食物链网式、生命周期式、生态系统式等网络结构     

大气氟化物对橡胶树的伤害实验研究

通过熏气模拟试验研究氟化氢气体对橡胶盆栽幼苗的影响。结果表明 :熏气后 ,橡胶苗出现典型受害症状 ,熏气浓度越高 ,受害越严重 ,叶片氟的积累量也越高。幼叶总是先于老叶受害 ,老叶对于氟的累积量高于幼叶 ;随着熏气浓度升高 ,电导率明显增加 ;熏气后 ,气孔发生变形 ,而且熏气浓度越高 ,变形越厉害 ;随叶片受害程度加大 ,叶片失绿 ,叶绿素含量降低。     

石化行业给排水系统设计图纸环境监理审查要点

石化行业废水种类多样、毒性较大,给排水系统的设计会直接影响石化项目建成后周边地表及地下水环境质量。设计文件的环保审查是环境监理的重要依据之一,其中,相关的设计图纸对下一步建设工作具有指导作用,是所有施工单位的施工依据。以某石化行业为例,对给排水系统设计文件的收集进行了分析,并根据设计图纸环保审查中存在的问题,对环境监理如何提高在设计会审中的作用,设计阶段如何对设计图纸进行审查以及审查的重点内容等进行了阐述。