可旋转径向式微粒捕集器消声特性影响因素灰色关联分析

为降低可旋转径向式微粒捕集器中的排气噪声,采用有限元法建立可旋转径向式微粒捕集器声学特性模型,分析得到了其消声特性和传递损失曲线,并采用灰色关联分析方法研究可旋转径向式微粒捕集器结构参数对消声特性的影响程度。结果表明,可旋转径向式微粒捕集器具有降噪能力,且对高频噪声消声效果明显好于低频噪声,平均消声量为20 dB左右;直径比和扩张管锥角是影响可旋转径向式微粒捕集器消声特性的2个主要因素,适当选用小的直径比和扩张管锥角,有利于提高可旋转径向式微粒捕集器的消声性能。     

Linking Climate Trends to Population Dynamics in the Baltic Ringed Seal: Impacts of Historical and Future Winter Temperatures

A global trend of a warming climate may seriously affect species dependent on sea ice. We investigated the impact of climate on the Baltic ringed seals (Phoca hispida botnica), using historical and future climatological time series. Availability of suitable breeding ice is known to affect pup survival. We used detailed information on how winter temperatures affect the extent of breeding ice and a climatological model (RCA3) to project the expected effects on the Baltic ringed seal population. The population comprises of three sub-populations, and our simulations suggest that all of them will experience severely hampered growth rates during the coming 90 years. The projected 30 730 seals at the end of the twenty-first century constitutes only 16 % of the historical population size, and thus reduced ice cover alone will severely limit their growth rate. This adds burden to a species already haunted by other anthropogenic impacts.     

The structure of the fire fighting foam surfactant Forafac®1157 and its biological and photolytic transformation products

For several decades, perfluorooctane sulfonate (PFOS) has widely been used as a fluorinated surfactant in aqueous film forming foams used as hydrocarbon fuel fire extinguishers. Due to concerns regarding its environmental persistence and toxicological effects, PFOS has recently been replaced by novel fluorinated surfactants such as Forafac®1157, developed by the DuPont company. The major component of Forafac®1157 is a 6:2 fluorotelomer sulfonamide alkylbetaine (6:2 FTAB), and a link between the trade name and the exact chemical structure is presented here to the scientific community for the first time. In the present work, the structure of the 6:2 FTAB was elucidated by ¹H, ¹³C and ¹⁹F nuclear magnetic resonance spectroscopy and high-resolution mass spectrometry. Moreover, its major metabolites from blue mussel (Mytilus edulis) and turbot (Scophthalmus maximus) and its photolytic transformation products were identified. Contrary to what has earlier been observed for PFOS, the 6:2 FTAB was extensively metabolized by blue mussel and turbot exposed to Forafac®1157. The major metabolite was a deacetylated betaine species, from which mono- and di-demethylated metabolites also were formed. Another abundant metabolite was the 6:2 fluorotelomer sulfonamide. In another experiment, Forafac®1157 was subjected to UV-light induced photolysis. The experimental conditions aimed to simulate Arctic conditions and the deacetylated species was again the primary transformation product of 6:2 FTAB. A 6:2 fluorotelomer sulfonamide was also formed along with a non-identified transformation product. The environmental presence of most of the metabolites and transformation products was qualitatively demonstrated by analysis of soil samples taken in close proximity to an airport fire training facility.     

重庆市大气污染对锌材料腐蚀的经济损失分析

简要介绍了材料大气腐蚀经济损失的估算方法,并以2002年为基准年,选择了重庆市主城中心的6个功能区作为代表性区域,运用腐蚀破坏剂量响应函数和使用寿命计算公式对锌材料的腐蚀经济损失进行了定量估算.结果表明,由大气污染腐蚀破坏锌材料造成的年直接经济损失约为4061.7万元,约为同期GDP的0.1%.其中,干沉降对经济损失总量的贡献率在71%～99%之间,均值为92%.     

Human Instability in Flood Flows1

Abstract: Loss of human stability in flood flows and consequent drowning are a high personal hazard. In this paper, we review past experimental work on human instability. The results of new experiments by the Flood Hazard Research Centre (FHRC) are also reported. These new results show that low depth/high velocity flood waters are more dangerous than suggested based on previous experimental work. It is discussed how human instability can be related to two physical mechanisms: moment instability (toppling) and friction instability (sliding). Comparison of the test results with these physical mechanisms suggests that the occurrence of instability in the tests by FHRC is related to friction instability. This mechanism appears to occur earlier than moment instability for the combination of shallow depth and high flow velocity. Those concerned to identify locations where high flood flows could be a threat to human life need to modify their hazard assessments accordingly.     

增压风机并联运行中脱硫系统入口压力控制

分析了石灰石-石膏湿法脱硫系统(WFGD)中2台增压风机并联运行的入口压力控制问题,讨论并提出了一种基于前馈--反馈加偏置的脱硫系统入口压力自动控制方案,并以某600MW超临界机组双增压风机脱硫系统的入口压力控制为例加以分析说明.     

城市防震减灾能力评估研究

首先论述了目前国内外关于城市地震灾害风险评估的研究,分析了这些研究取得的成果和存在的不足。然后,提出了城市防震减灾能力的概念,采用人员伤亡,经济损失和震后恢复时间作为衡量城市防震减灾能力强弱的3个最基本的要素。围绕这3个基本要素,列举出影响城市防震减灾能力的6大因素,在此基础上,提出了城市防震减灾能力评价指标体系的具体内容。     

Effects of Dam‐Induced Landscape Fragmentation on Amazonian Ant–Plant Mutualistic Networks

Mutualistic networks are critical to biological diversity maintenance; however, their structures and functionality may be threatened by a swiftly changing world. In the Amazon, the increasing number of dams poses a large threat to biological diversity because they greatly alter and fragment the surrounding landscape. Tight coevolutionary interactions typical of tropical forests, such as the ant–myrmecophyte mutualism, where the myrmecophyte plants provide domatia nesting space to their symbiotic ants, may be jeopardized by the landscape changes caused by dams. We analyzed 31 ant–myrmecophyte mutualistic networks in undisturbed and disturbed sites surrounding Balbina, the largest Central Amazonian dam. We tested how ant–myrmecophyte networks differ among dam‐induced islands, lake edges, and undisturbed forests in terms of species richness, composition, structure, and robustness (number of species remaining in the network after partner extinctions). We also tested how landscape configuration in terms of area, isolation, shape, and neighborhood alters the structure of the ant–myrmecophyte networks on islands. Ant–myrmecophytic networks were highly compartmentalized in undisturbed forests, and the compartments had few strongly connected mutualistic partners. In contrast, networks at lake edges and on islands were not compartmentalized and were negatively affected by island area and isolation in terms of species richness, density, and composition. Habitat loss and fragmentation led to coextinction cascades that contributed to the elimination of entire ant–plant compartments. Furthermore, many myrmecophytic plants in disturbed sites lost their mutualistic ant partners or were colonized by opportunistic, nonspecialized ants. Robustness of ant–myrmecophyte networks on islands was lower than robustness near lake edges and in undisturbed forest and was particularly susceptible to the extinction of plants. Beyond the immediate habitat loss caused by the building of large dams in Amazonia, persistent edge effects and habitat fragmentation associated with dams had large negative effects on animal–plant mutualistic networks. Efectos de la Fragmentación del Paisaje Inducida por Presas sobre Redes Mutualistas Hormiga‐Planta Amazónicas     

ESTIMATED RUNOFF FROM MAN-MADE SNOW1

ABSTRACT: The consumptive loss from man-made snowmaking at six Colorado ski areas is calculated. The focus of the procedures in this investigation is on the consumptive loss that occurs to man-made snow particles during the period they reside on or in the snowpack until spring snowmelt (termed the watershed loss). Calculated watershed losses under a variety of precipitation and temperature conditions at six ski areas varied from 7 to 33 percent. These calculations were made using the calibrated Subalpine Water Balance Simulation Model (Leaf and Brink, 1973a, 1973b). The watershed loss of 7 to 33 percent indicates the range of likely watershed losses that can be expected at Colorado ski areas. A previous paper by the authors (Eisel et al., 1988) provided estimates of the mean consumptive loss during the snowmaking process (termed initial loss) for conditions existing at Colorado ski areas to be 6 percent of water applied. Therefore, based on the mean initial loss, the total consumptive loss from man-made snowmaking under conditions found at Colorado ski areas could be expected to range from 13 to 37 percent. These results demonstrate the range of total consumptive losses that could be expected in various years and for various watershed conditions. These total percentage losses cannot be extrapolated directly to other specific sites because the total consumptive loss is dependent on temperature during actual snowmaking, temperature and precipitation throughout the winter at the specific ski area, and watershed conditions at the ski area. Consumptive losses to man-made snow for a specific ski area should be estimated using the handbook procedures developed especially for this purpose (Colorado Ski Country USA, 1986b).     

The boiling liquid expanding vapour explosion

The boiling liquid expanding vapour explosion (BLEVE) has existed for a long time and for most of this time it has been cloaked in mystery. Several theories have been put forward to explain this very energetic event but none have been proven. This paper describes a series of tests that have recently been conducted to study this phenomenon.

The study involved ASME code automotive propane tanks with nominal capacities of 400 litres. The tanks were exposed to a combination of pool and/or torch fires. These fire conditions led to thermal ruptures, and in some cases these ruptures resulted in BLEVEs. The variables in the tests were the pressure-relief valve setting, the tank wall thickness, and the fire condition.

In total, 30 tests have been conducted, of which 22 resulted in thermal ruptures. Of those tanks that ruptured, 11 resulted in what we call BLEVEs. In this paper, we have defined a BLEVE as the explosive release of expanding vapour and boiling liquid following a catastrophic tank failure. Non-BLEVEs involved tanks that ruptured but which only resulted in a prolonged jet release.

The objective of this study was to investigate why certain tank ruptures lead to a BLEVE rather than a more benign jet-type release. Data are presented to show how wall temperature, wall thickness, liquid temperature and fill level contribute to the BLEVE process.