The Volta Lake and Declining Rainfall and Streamflows in the Volta River Basin

This paper looks at the rainfall and streamflow patterns over two distinct time periods, i.e., 1950–1970 and 1971–1991 within the two most prominent catchments in the Volta river system – White Volta and the Oti basins. The first period (1950–1970) represents relatively vegetated catchments and low population whilst the latter (1971–1990) represents intense land use practices resulting from increased population that have severely degraded the environment. These two catchments are among the most significant contributors to the Volta lake. The Volta lake, which was formed between 1962 and 1966 in Ghana and created primarily for hydroelectric power generation, will probably be one of the greatest man-made lakes for a long time. It produces 912MW of electricity at its maximum operating capacity. Recently, there have been declines in the lake levels resulting most probably from inadequate rainfall and/or runoff from the river catchments that feed the lake. Comparisons of runoffs for the two time periods show reductions in mean streamflows of 32.5% at Saboba on the Oti and 23.1% at Nawuni on the White Volta.     

Water Use by Thermoelectric Power Plants in the United States1

Abstract: Thermoelectric power generation is responsible for the largest annual volume of water withdrawals in the United States although it is only a distant third after irrigation and industrial sectors in consumptive use. The substantial water withdrawals by thermoelectric power plants can have significant impacts on local surface and ground water sources, especially in arid regions. However, there are few studies of the determinants of water use in thermoelectric generation. Analysis of thermoelectric water use data in existing steam thermoelectric power plants shows that there is wide variability in unitary thermoelectric water use (in cubic decimeters per 1 kWh) within and among different types of cooling systems. Multiple‐regression models of unit thermoelectric water use were developed to identify significant determinants of unit thermoelectric water use. The high variability of unit usage rates indicates that there is a significant potential for water conservation in existing thermoelectric power plants.     

Use of Streamflow Data to Estimate Base Flow/Ground‐Water Recharge For Wisconsin1

Abstract: The average annual base flow/recharge was determined for streamflow‐gaging stations throughout Wisconsin by base‐flow separation. A map of the State was prepared that shows the average annual base flow for the period 1970‐99 for watersheds at 118 gaging stations. Trend analysis was performed on 22 of the 118 streamflow‐gaging stations that had long‐term records, unregulated flow, and provided aerial coverage of the State. The analysis found that a statistically significant increasing trend was occurring for watersheds where the primary land use was agriculture. Most gaging stations where the land cover was forest had no significant trend. A method to estimate the average annual base flow at ungaged sites was developed by multiple‐regression analysis using basin characteristics. The equation with the lowest standard error of estimate, 9.5%, has drainage area, soil infiltration and base flow factor as independent variables. To determine the average annual base flow for smaller watersheds, estimates were made at low‐flow partial‐record stations in 3 of the 12 major river basins in Wisconsin. Regression equations were developed for each of the three major river basins using basin characteristics. Drainage area, soil infiltration, basin storage and base‐flow factor were the independent variables in the regression equations with the lowest standard error of estimate. The standard error of estimate ranged from 17% to 52% for the three river basins.     

COMPARATIVE EVALUATION OF THREE URBAN RUNOFF MODELS1

ABSTRACT: Three urban runoff models, namely, the Road Research Laboratory Model (RRLM), the Storm Water Management Model (SWMM) and the University of Cincinnati Urban Runoff Model (UCURM), were examined by comparing the model simulated hydrographs with the hydrographs measured on several instrumented urban watersheds. This comparison was done for the hydrograph peak points as well as for the entire hydrographs using such statistical measures as the correlation coefficient, the special correlation coefficient and the integral square error. The results of the study indicated that, when applying the three selected non-calibrated models on small urban catchments, the SWM model performed marginally better than the RRL model and both these models were more accurate than the UCUR model. On larger watersheds, the comparisons between the SWM model and the other two models would be likely even more favourable for the SWM model, because it has the most advanced flow routing scheme among the studied models.     

WATER HARVESTING TREATMENT EVALUATION AT GRANITE REEF1

ABSTRACT: Yearly runoff efficiencies (total runoff/total precipitation), threshold retentions (precipitation needed to initiate runoff), and runoff-efficiencies-after-thresholds were determined for several water-harvesting catchment treatments at the Granite Reef test site. This information was found to be useful for showing (1) overall performance of catchments with time; (2) the distribution of the precipitation among runoff, surface retention, and infiltration; (3) why, how, and when certain treatments weathered and failed; (4) when to repair treatments; and (5) how to design catchments (size, site preparation, material selection, etc.). New impermeable membranes with smooth surfaces yielded nearly 100% of the precipitation. An asphalt-fiberglass treatment continues this high efficiency after 10 years of weathering – polyethylene after 8; efficiency of butyl sheeting was high initially but decreased rapidly after 9 years weathering. A standard roofing treatment retained up to 30% of the precipitation in the gravel covering. A concrete catchment lost as much as 50% of the total precipitation through micropores and surface cracks. Silicone treatments rapidly lost repellancy and efficiency, while paraffin treatments have weathered 5 years with little loss of efficiency.     

OBSERVATIONS ON KINEMATIC RESPONSE IN URBAN RUNOFF MODELS1

ABSTRACT: This paper first discusses the results of sensitivity analyses conducted on various parameters of the San Francisco Stormwater Model ta version of WREM) and the Penn State Runoff Model in terms of their impact on outflow hydrographs. The parameters considered within a idealized catchment include: basin shape, imperivous fraction, overland roughness and slope: deterntion depth; infiltration capacity; and hyetograph timing. Second, the results for the hypothetical catchment are extended to the lazzard laboratory surfaces (asphalt, grass, roofing material) as a mean of illustrating the need for changes in model structure, as opposed to continued parameter adjustment Finally the effect of altering the scale of hydraulic representation in the surface runoff and sewer transport calculations are demonstrated for two gaged watersheds in Hamburg, West Germany.     

APPLICATION OF ADVANCES IN FLOOD FREQUENCY ANALYSIS1

ABSTRACT: Flood frequency analyses are frequently being made using widely available computer programs. Serious errors can result from blind acceptance of such results. Visual interpretation of observed flood series can be used for evaluation on frequency paper with compatible scales. Such frequency papers are presented in the paper. In ephemeral streams, more infrequent floods may constitute a separate set from the more frequent floods because (a) runoff producing storms cover only a portion of the contributing area, (b) transmission losses in the normally dry streambed may reduce the peak flow, and (c) some runoff may be stored in stock water ponds which therefore leads to partial area runoff. The Cunnane plotting position used in this paper is superior to the more widely used Weibull equation, having a mathematically sound basis for locating observed floods on an assumed probability.     

A Spatial equilibrium perspective for planning the production of electrical energy

A spatial and temporal equilibrium model of production, consumption, prices, and transmission is constructed to determine the efficient pricing and allocation of electrical energy in the United States. Regional coordination is technically feasible and economically attractive. It also maximizes environmental efficiencies. The duplication of electrical generation and transmission facilities yields a misallocation of resources.The utilities put forth specific arguments against coordinated operations. Yet in a fully integrated power system, each region would be expected to maximize the benefits of time diversity by purchasing from outside the region in lieu of the expansion of regional capacity. The Federal Energy Regulatory Commission has not yet made a serious move to encourage regional coordination and planning, but the Commission has the authority to promote such operations if it chooses to do so.The author is an economist with the Department of Energy. The views expressed are those of the author and do not necessarily represent the policies of the Department of Energy or the views of other staff members.     

STOCHASTIC MODELING OF MONTHLY AND DAILY RAINFALL SEQUENCES1

ABSTRACT: A monthly model and two daily models (I and II) are presented for the purpose of generating monthly and daily rainfall sequences in the Quae Yai river basin in Thailand. Performance of the models are evaluated by comparing the statistical parameters of the generated sequences with those from historical data. For monthly generation, Thomas-Fiering model worked satisfactorily in spite of the monthly correlations being weak, if any. Daily Model I, which assumes no persistence between daily rainfall amounts within the wet spells, could not preserve some important parameters regardless of the simplicity in model construction. Application of multi-state transition probability matrix model gave good results, although the user has to modify some parameters looking at the performance of the model for each historical record.     

GEOMORPHIC PARAMETERS PREDICT HYDROGRAPH CHARACTERISTICS IN THE SOUTHWEST1

ABSTRACT: Critical design characteristics of ephermal runoff such as hydrograph rise time, duration, mean peak discharge, volume, peak-volume ratio, and maximum flood were related to physical basin parameters such as area, shape, slope, drainage density, basin relief, stream length, and combinations of these in intermontane watersheds representative of the Mexican Highland section of the Basin and Range Province. Parameters used were restricted to those easily obtainable from maps or aerial photographs. A parameter expressing basin shape and size was developed which proved to be as accurate a predictor as others used in existing prediction equations tested and was simpler and faster to derive. Simple prediction equations derived for hydrograph characteristics were all significant except for volume at the 5% level; three were significant at the 1% level. Relationships determined are applicable in semi-arid basins of the Southwest up to 60 square miles (155 km²) in area.