Water saving effect on integrated water resource management

This study proposes an improved integrated water resource management (IWRM), in which water conservation was analyzed for the entire water use process. A multi-objective optimization method was applied to optimize the IWRM, which investigated the reduction of freshwater consumption and the total water supply cost. Customer's preference for saving water and an end use analysis (EUA) was applied in the water conservation analysis. Taking Tianjin as the study area, a reduction in customer's economic pressure (EP) was utilized to evaluate the degree of the customer's preference for saving water. The results revealed that agriculture had a greater preference for saving water than other sectors, where as the public had the weakest motivation for saving water. Improving the transportation method could contribute 62.1% of the total water savings in the agriculture sector. The optimization of the IWRM demonstrated that the local freshwater savings would be 21.5%, and the total cost for water supplies would decrease by 13%. However, a government subsidy of 87.5 million Yuan would be needed. Additionally, by analyzing the change in the amount of water savings affected by water price, the appropriate water price increase range was suggested to be 1.5–1.7 times the original price.     

Toward Cyborg PPGIS: exploring socio-technical requirements for the use of web-based PPGIS in two municipal planning cases,Stockholm region,Sweden

Web-based Public Participation Geographic Information Systems (PPGIS) are increasingly used for surveying place values and informing municipal planning in contexts of urban densification. However, research is lagging behind the rapid deployment of PPGIS applications. Some of the main opportunities and challenges for the uptake and implementation of web-based PPGIS are derived from a literature review and two case studies dealing with municipal planning for urban densification in the Stockholm region, Sweden. A simple clustering analysis identified three interconnected themes that together determine the performance of PPGIS: (i) tool design and affordances; (ii) organisational capacity; and (iii) governance. The results of the case studies augment existing literature regarding the connections between the different socio-technical dimensions for the design, implementation and evaluation of PPGIS applications in municipal planning. A cyborg approach to PPGIS is then proposed to improve the theoretical basis for addressing these dimensions together.     

雷达海杂波统计特性建模研究

介绍了海杂波统计特性建模的幅度特性、多普勒谱及空间相关这三个方面的研究状况,对各种建模的思路和模型效果进行了对比总结。对于幅度均值已有多个较为成熟的模型,但适用范围不同,结果差异也很大。幅度分布建模重点解决拖尾问题,复合建模是趋势。除平均谱外,开始研究短时多普勒谱。空间相关性建模主要建立空间相关长度与雷达及海洋参数间的联系,但是研究还不够全面。总的来看,已由单纯经验建模发展为力图在机理研究指导下有一定物理意义的建模。尽管海杂波建模效果愈来愈接近实际,但建模依然存在诸多问题。     

海岛水库水源地污染现状与保护对策研究——以舟山市为例

饮用水安全是维护人民群众生命健康,全面建设社会主义和谐社会的一项重要内容.以浙江省舟山市为例,通过实地调查海岛水库水源地周边生活、农业、工业污染源情况,并利用现场、问卷调查和卫星影像图开展分析,对污染源排放总量进行了测算,完成了水库水源地污染源排放状况分析,提出相应的对策措施.研究结论促进舟山市水库水资源的合理开发和利用,推进舟山经济可持续发展,为舟山市水库水源地的污染防治措施制定提供重要参考依据.     

利用壳聚糖溶液探讨黄土中铬(VI)的提取效果研究

铬是环境中一种重要的重金属污染物,大量含铬的废水、废渣随意排放导致土壤、水体和生物遭到不同程度的污染.中国黄土分布面积广泛,本研究以典型的西部黄土为对象,通过室内土柱淋滤试验,以灌水量和示踪铬浓度为控制因子,研究铬在黄土层中的分布、迁移转化规律及黄土对铬的吸附特性.由于壳聚糖的结构中含有大量的-NH2和-OH,因此壳聚糖,它对重金属离子有优良的吸附作用.探讨了吸附时间、壳聚糖浓度、pH、液固比、温度对壳聚糖吸附黄土中Cr(VI)的提取效果.     

Removal of Cd2+ from water by Friedel’s salt (FS: 3CaO.Al2O3·CaCl2·10H2O): Sorption characteristics and mechanisms

The development of low-cost and efficient new mineral adsorbents has been a hot topic in recent years. In this study, Friedel’s salt (FS:3CaO·A12O3 ·CaCl2 ·10H2O), a hexagonal layered inorganic absorbent, was synthesized to remove Cd2+ from water. The adsorption process was simulated by Langmuir and Freundlich models. The adsorption mechanism was further analyzed with TEM, XRD, FT-IR analysis and monitoring of metal cations released and solution pH variation. The results indicated the adsorbent FS had an outstanding ability for Cd(Ⅱ) adsorption. The maximum adsorption capacity of the FS for Cd(Ⅱ) removal can reach up to 671.14 mg/g. The nearly equal numbers of Cd2+ adsorbed and Ca2+ released demonstrated that ion-exchange (both surface and inner) of the FS for Cd(Ⅱ) played an important role during the adsorption process. Furthermore, the surface of the FS after adsorption was microscopically disintegrated while the inner lamellar structure was almost unchanged. The behavior of Cd(Ⅱ) adsorption by FS was significantly affected by surface reactions. The mechanisms of Cd2+ adsorption by the FS mainly included surface complexation and surface precipitation. In the present study, the adsorption process was fitted better by the Langmuir isotherm model (R2 = 0.9999) than the Freundlich isotherm model (R2 = 0.8122). Finally, due to the high capacity for ion-exchange on the FS surface, FS is a promising layered inorganic adsorbent for the removal of Cd(Ⅱ) from water.     

Formic acid as an alternative reducing agent for the catalytic nitrate reduction in aqueous media

Formic acid was used for the nitrate reduction as a reductant in the presence of Pd:Cu/γ-alumina catalysts. The surface characteristics of the bimetallic catalyst synthesized by wet impregnation were investigated by SEM, TEM-EDS. The metals were not distributed homogeneously on the surface of catalyst, although the total contents of both metals in particles agreed well with the theoretical values. Formic acid decomposition on the catalyst surface, its influence on solution pH and nitrate removal efficacy was investigated. The best removal of nitrate (50 ppm) was obtained under the condition of 0.75 g/L catalyst with Pd:Cu ratio (4:1) and two fold excess of formic acid. Formic acid decay patterns resembled those of nitrate removal, showing a linear relationship between kf (formic acid decay) and k (nitrate removal). Negligible amount of ammonia was detected, and no nitrite was detected, possibly due to buffering effect of bicarbonate that is in situ produced by the decomposition of formic acid, and due to the sustained release of H2 gas.     

水质氨氮自动分析仪分析方法研究

氨氮自动分析仪是根据纳氏试剂分光光度法的原理,通过自动进样,自动蒸馏,来实现快速准确的分析水质氨氮样品。近年来,氨氮自动分析仪广泛应用于环境监测领域,该方法能够快速、准确、方便地测定水质中的氨氮。利用标准方法纳氏试剂分光光度法进行实验室内的比对实验,通过实验分析,氨氮自动分析仪的分析曲线线性较好,相关系数达到0．9998,方法检出限、准确率和精密度能够满足当前环境监测标准的要求,实际样品测定结果理想,适合在环境监测领域推广应用。     

九龙江河口区夏季反硝化作用初探

河口反硝化是削减入海河流氮污染的重要途径,为探明地处亚热带的九龙江河口混合区的反硝化作用,于2010年7月开展13个站位的面上调查,利用N2：Ar法和膜进样质谱分析仪（MIMS）直接测定反硝化产物溶解N2浓度,用吹扫捕集-气相色谱法测定溶解N2O浓度,并估算二者净增量和水气交换通量.结果表明,溶解N2和N2O净增量有明显的区域变化,从淡水端向海域减少,N2净增量为-9.9～66.8μmol.L-1,N2O净增量为4.3～31.5 nmol.L-1;N2O饱和度为170%～562%,平均352%;N2水气通量为-2.9～53.2 mmol.（m2.d）-1,N2 O水气通量为5.2～23.9μmol.（m2.d）-1,N2 O通量占总通量的0.03%～1.2%（平均0.25%）.温度和营养盐（氮、磷）是影响九龙江河口区反硝化作用的重要因子;淡水端（盐度〈0.5）反硝化作用及其空间分布主要受硝酸盐含量控制,海水端溶解N2与N2O的增加主要来自淡水端的输送,并受盐度梯度（混合作用）影响.