地下饮用水中痕量NO2-的催化动力学法测定

报道了一种新的测定NO2-的高选择性和高灵敏度的催化光度分析法.基于H3PO4介质中,碘绿与溴酸钾的氧化还原反应受亚硝酸盐的催化使碘绿褪色.据此建立了测定NO2-的新方法.本方法检出限为0.29μg/L,该方法用于地下饮用水、环境标样的测定,相对标准偏差为1.05%～4.80%,加标回收率为95%～117%.     

环境监测报告(记录)的审核原则和方法

从实际工作出发,提出了审核原始记录、数字型监测报告（报表）和文字型监测报告的审核原则和方法。     

石墨炉法测定铅的基体改进剂的选择

通过一系列实验,选择了石墨炉法测定铅的最佳基体改进剂,并确定了使用该基体改进剂的最佳灰化温度和原子化温度。     

An evaluation of selenium concentrations in water, sediment, invertebrates, and fish from the Solomon River Basin

The Solomon River Basin is located in north-central Kansas in an area underlain by marine geologic shales. Selenium is an indigenous constituent of these shales and is readily leached into the surrounding groundwater. Portions of the Basin are irrigated primarily through the pumping of selenium-contaminated groundwater from wells onto fields in agricultural production. Water, sediment, macroinvertebrates, and fish were collected from various sites in the Basin in 1998 and analyzed for selenium. Selenium concentrations were analyzed spatially and temporally and compared to reported selenium toxic effect thresholds for specific ecosystem components: water, sediments, food-chain organisms, and wholebody fish. A selenium aquatic hazard assessment for the Basin was determined based on protocol established by Lemly. Throughout the Basin, water, macroinvertebrate, and whole fish samples exceeded levels suspected of causing reproductive impairment in fish. Population structures of several fish species implied that successful reproduction was occurring; however, the influence of immigration of fish from low-selenium habitats could not be discounted. Site-specific fish reproduction studies are needed to determine the true impact of selenium on fishery resources in the Basin. The U.S. Government’s right to retain a non-exclusive, royalty free license in and to any copyright is acknowledged.     

博物馆室内微环境中碱性气体的被动采样方法研究

针对博物馆微环境中的碱性污染气体-氨气,采用自行研制的被动采样器,建立了一套适合博物馆馆藏文物保存环境中氨气含量分析的被动采样-离子色谱检测方法,应用于博物馆的实地采样分析,通过与主动法采样对照,获得了被动采样器在博物馆微环境中氨的吸收系数,从而获得采样点空气中氨气的浓度,为博物馆文物保存环境监测提供了可行方法。     

双三角解析法快速配制环境监测分析中的标准溶液

介绍了在环境监测分析中精确配制一定浓度标准溶液的快速方法。利用双三角解析法称量标准物质和配制标准溶液,实验过程快速、准确。在环境监测分析应用中取得较好效果,不确定度无显著差异。     

Extended geometric method: a simple approach to derive adsorption rate constants of Langmuir-Freundlich kinetics

A new and simple equation has been presented here for calculation of adsorption and desorption rate constants of Langmuir-Freundlich kinetic equation. The derivation of new equation is on the basis of extension and correction to the geometric method which has been presented by Kuan et al. [Kuan, W.-H., Lo, S.-L., Chang, C.M., Wang, M.K., 2000. A geometric approach to determine adsorption and desorption kinetic constants. Chemosphere 41, 1741-1747] for the kinetics of adsorption/desorption in aqueous solutions. The correction is to consider that the concentration of solute is not constant and changes as adsorption proceeds. The extension is that we applied Langmuir-Freundlich kinetic model instead of Langmuir kinetic model to consider the heterogeneity and therefore it is more applicable to the real systems. For solving Langmuir-Freundlich kinetic model, some geometric methods and also Taylor expansion were used and finally a simple and novel equation was derived (Eq. (20)) for calculation of adsorption rate constant. This new method was named "extended geometric method". The input data of the obtained equation can be simply derived from initial data of adsorption kinetics. Finally the adsorption of methyl orange onto granular activated carbon was carried out at dynamic and equilibrium conditions and the capabilities of extended geometric method were examined by the experimental data.     

基于集对分析的尾矿库安全评价研究

为更好地对尾矿库的安全状况进行综合评价,针对尾矿库的特点建立了指标体系,并采用层次分析法确定各指标权重.将集对分析理论用于尾矿库的安全评价,并通过实例证明该理论适合于尾矿库的安全评价.集对分析中差异度I取1和-1.研究表明,当I=1时,指标体系中所有处于"一般安全"状态的指标项经过整改后能处于"安全"状态,此时联系度μ=0.736,尾矿库处于"安全"状态; 当I=-1时,指标体系中所有处于"一般安全"状态的指标项,在安全管理水平下降的情况下全部转为"不安全"状态,此时μ=0.114,尾矿库处于"不安全"状态.I的不同取值可反映尾矿库的具体安全状态,同时也反映尾矿库的安全管理水平,并充分体现了安全管理的重要性.研究为尾矿库的安全评价提供了一条新途径.     

基于虚拟样机的自卸汽车卸载作业侧翻分析

针对自卸汽车卸载作业时发生的侧翻问题,分析影响自卸汽车作业安全的因素.根据自卸汽车结构及其作业特点,建立自卸汽车整车虚拟样机模型.采用多体系统动力学分析软件(ADAMS),对自卸汽车在不同横向坡度卸载作业的安全性进行仿真分析,得到自卸汽车安全作业的举升角与路面横向坡度、装载重量间的关系.结果表明,一定载荷条件下,横向坡度越大,临界举升角越小; 横向坡度相同时,载重越大,临界举升角越小; 未正常卸载工况的临界举升角小于正常卸载工况的.本研究为减少或避免自卸汽车卸载作业时的侧翻事故提供了参考依据.