Occupational safety and health education under the lifelong learning framework in Serbia

Serbia is aligning with European Union requirements and the occupational safety and health (OSH) administration is one of the most representative sectors of this alignment. Many efforts were made in this field, by introducing new laws and regulations, but it turned out to be insufficient. OSH professionals need to renovate and strengthen their knowledge in accordance with continuous, updated and improved OSH standards and regulation. Lifelong learning (LLL) programmes can contribute to forming professionals who are always up to date. This paper presents an implemented LLL programme, over the duration of two academic years, dedicated to OSH professionals, and investigates whether this programme will be helpful and accepted by professionals. The results from the study show that the given LLL programme had indeed a positive influence on the professional careers of the participants and that the LLL presents the future trend in OSH education.     

Trends in occupational injuries and fatality in Turkey

Introduction. The aim of this study was to evaluate the trend of occupational injuries in Turkey using epidemiologic criteria such as incidence mortality and fatality/all injuries recorded – rates. Materials and methods. Safety and health data were obtained from the Annual Statistic Books of the Social Insurance Institution (1988–2006) and Social Security Institution (2007–2011) of Turkey. Results. The results from the official data showed that although total employment is increasing the number of occupational injuries and incidence and mortality rates are decreasing. The results also demonstrate that occupational fatality/all injuries recorded – rate is increasing. The fatality/all injuries recorded – rate per 1000 injuries increased to 25.5 in 2011 from 8.6 in 1988. Each work day an average of five people died because of occupational injuries. Discussion and conclusions. The fatality/all injuries recorded – rate (the number of fatal cases per 1000 occupational injuries) is an important indicator of the injury rate for a country. Systems of occupational injury and illness surveillance constitute a critical resource for the management and reduction of occupational injuries and illness.     

Motorcycle safety among motorcycle taxi drivers and nonoccupational motorcyclists in developing countries: A case study of Maoming,South China

Objective: An increasing number of motorcycle taxis have been involved in traffic crashes in many developing countries. This study examines the characteristics of both motorcycle taxi drivers and nonoccupational motorcyclists, investigates the risks they pose to road safety, and provides recommendations to minimize their risks.

Methods: Based on the data collected from a questionnaire survey of 867 motorcycle taxi drivers and 2,029 nonoccupational motorcyclists in Maoming, South China, comparisons were made to analyze differences of personal attributes, attitudes toward road safety, and self-reported behavior of the 2 groups.

Results: Results of the chi-square tests show that not only motorcycle taxi drivers but also nonoccupational motorcyclists in Maoming held poor attitudes toward road safety and both groups reported unsafe driving behavior. There is much room for improving local road safety education among all motorcyclists in Maoming. Yet, motorcycle taxi drivers were more likely to pose road safety risks than nonoccupational motorcyclists under some circumstances, such as speeding late at night or early in the morning, not requiring passengers to wear helmets, and running a red light. The results of the binary logistic regression model show that possessing a vehicle license for a motorcycle or not was the common significant predictor for unsafe driving behavior of motorcycle taxi drivers and nonoccupational motorcyclists. Therefore, enforcement against all motorcyclists not showing vehicle licenses for their motorcycles should be stepped up.

Conclusion: Motorcycle safety is largely poor in Maoming. Therefore, efforts to improve motorcycle safety should be strengthened by targeting not only motorcycle taxi drivers but also nonoccupational motorcyclists.     

How do children learn to cross the street? The process of pedestrian safety training

Objective: Pedestrian injuries are a leading cause of child death and may be reduced by training children to cross streets more safely. Such training is most effective when children receive repeated practice at the complex cognitive–perceptual task of judging moving traffic and selecting safe crossing gaps, but there is limited data on how much practice is required for children to reach adult levels of functioning. Using existing data, we examined how children's pedestrian skills changed over the course of 6 pedestrian safety training sessions, each composed of 45 crossings within a virtual pedestrian environment.

Methods: As part of a randomized controlled trial on pedestrian safety training, 59 children ages 7–8 crossed the street within a semi-immersive virtual pedestrian environment 270 times over a 3-week period (6 sessions of 45 crossings each). Feedback was provided after each crossing, and traffic speed and density were advanced as children's skill improved. Postintervention pedestrian behavior was assessed a week later in the virtual environment and compared to adult behavior with identical traffic patterns.

Results: Over the course of training, children entered traffic gaps more quickly and chose tighter gaps to cross within; their crossing efficiency appeared to increase. By the end of training, some aspects of children's pedestrian behavior was comparable to adult behavior but other aspects were not, indicating that the training was worthwhile but insufficient for most children to achieve adult levels of functioning.

Conclusions: Repeated practice in a simulated pedestrian environment helps children learn aspects of safe and efficient pedestrian behavior. Six twice-weekly training sessions of 45 crossings each were insufficient for children to reach adult pedestrian functioning, however, and future research should continue to study the trajectory and quantity of child pedestrian safety training needed for children to become competent pedestrians.     

Seat strength in rear body block tests

Purpose: This study collected and analyzed available testing of motor vehicle seat strength in rearward loading by a body block simulating the torso of an occupant. The data were grouped by single recliner, dual recliner, and all belts to seat (ABTS) seats.

Methods: The strength of seats to rearward loading has been evaluated with body block testing from 1964 to 2008. The database of available tests includes 217 single recliner, 65 dual recliner, and 18 ABTS seats. The trends in seat strength were determined by linear regression and differences between seat types were evaluated by Student's t-test. The average peak moment and force supported by the seat was determined by decade of vehicle model year (MY).

Results: Single recliner seats were used in motor vehicles in the 1960s to 1970s. The average strength was 918 ± 224 Nm (n = 26) in the 1960s and 1,069 ± 293 Nm (n = 65) in the 1980s. There has been a gradual increase in strength over time. Dual recliner seats started to phase into vehicles in the late 1980s. By the 2000s, the average strength of single recliner seats increased to 1,501 ± 335 Nm (n = 14) and dual recliner seats to 2,302 ± 699 Nm (n = 26). Dual recliner seats are significantly stronger than single recliner seats for each decade of comparison (P < .001). The average strength of ABTS seats was 4,395 ± 1,185 in-lb for 1989–2004 MY seats (n = 18). ABTS seats are significantly stronger than single or dual recliner seats (P < .001). The trend in ABTS strength is decreasing with time and converging toward that of dual recliner seats.

Conclusions: Body block testing is an quantitative means of evaluating the strength of seats for occupant loading in rear impacts. There has been an increase in conventional seat strength over the past 50 years. By the 2000s, most seats are 1,700–3,400 Nm moment strength. However, the safety of a seat is more complex than its strength and depends on many other factors.     

Internal short circuit and accelerated rate calorimetry tests of lithium-ion cells: Considerations for methane-air intrinsic safety and explosion proof/flameproof protection methods

Researchers with the National Institute for Occupational Safety and Health (NIOSH) studied the potential for lithium-ion cell thermal runaway from an internal short circuit in equipment for use in underground coal mines. In this third phase of the study, researchers compared plastic wedge crush-induced internal short circuit tests of selected lithium-ion cells within methane (CH₄)-air mixtures with accelerated rate calorimetry tests of similar cells. Plastic wedge crush test results with metal oxide lithium-ion cells extracted from intrinsically safe evaluated equipment were mixed, with one cell model igniting the chamber atmosphere while another cell model did not. The two cells models exhibited different internal short circuit behaviors. A lithium iron phosphate (LiFePO₄) cell model was tolerant to crush-induced internal short circuits within CH₄-air, tested under manufacturer recommended charging conditions. Accelerating rate calorimetry tests with similar cells within a nitrogen purged 353-mL chamber produced ignitions that exceeded explosion proof and flameproof enclosure minimum internal pressure design criteria. Ignition pressures within a 20-L chamber with 6.5% CH₄-air were relatively low, with much larger head space volume and less adiabatic test conditions. The literature indicates that sizeable lithium thionyl chloride (LiSOCl₂) primary (non rechargeable) cell ignitions can be especially violent and toxic. Because ignition of an explosive atmosphere is expected within explosion proof or flameproof enclosures, there is a need to consider the potential for an internal explosive atmosphere ignition in combination with a lithium or lithium-ion battery thermal runaway process, and the resulting effects on the enclosure.     

SPA和模糊数学在尾矿库安全评价中的应用研究

在传统安全评价中,由于安全系统的灰色性、评价环境的复杂性以及评价者知识储备的有限性,导致安全评价方法对尾矿库安全性难以做出全面准确的有效评价。为了更好地对尾矿库的安全状况进行综合评价,将模糊数学与集对分析引入到聚类分析和安全评价过程中,建立了基于SPA模糊聚类的综合评价方法,削弱了评价过程中的主观性,利用了灰色信息,结合工程实例证明该方法在尾矿库安全评价中的有效性,为尾矿库安全科学评价提供了一种新途径。     

基于安全理念的长春市重大危险源控制规划研究

重大危险源控制规划与城市规划紧密结合,不仅是科学建设城市的要求,也是维护社会稳定的要求.通过对长春市现状居住用地布局、工业用地布局、仓储用地布局、燃气工程及加油站等概况及存在的安全隐患进行分析,根据城市规划和管理的需要,从城市的安全功能区划、重大危险源辨识、重大危险源安全规划对象、风险评价、风险控制等方面,提出了长春市重大危险源控制规划编制工作的迫切性及研究内容.将重大危险源的布局结合在城市规划当中,一方面可以使城市规划充分考虑重大危险源的安全问题,另一方面能够从规划层面上减小重大危险源对人民生命财产安全造成的危害.     

石油化工企业常见危险源分析及其安全对策研究

随着石化企业新技术、新工艺、新材料的不断应用,石化企业危险化学品的数量及种类逐渐增多,危险源和安全隐患日益突出,石化企业的发展面临安全生产新挑战.本文从石油化工原料产品、化工反应装置等方面人手,分析了石化企业的主要危险源,并分析了常减压蒸馏装置、催化裂化装置、聚丙烯装置、延迟焦化装置及汽油加氢装置等常见生产装置的危险性...     

海上平台设计中几个安全问题的探讨

本文针对海上平台设计中直接关系到海上平台安全的几个问题,如参考风向选取、挡风墙设置、消防水喷淋设置等进行了研究,并针对其存在的问题提出了具体的改进建议,即:在海上平台总体布置设计中,采用"最小频率风向"作为参考风向;设置挡风墙应尽量避免采用全墙体的固定式挡风墙,建议采用推拉式、开窗式等类型;在消防水喷淋的设计中,应遵循...