呼和浩特地区污水厂能耗评价与碳排放分析

污水处理过程的能耗和温室气体排放方面的研究对于应对能源危机和气候危机具有重要作用。文章利用层次分析法,建立了具有4层15项指标的能耗评价体系。结合城镇污水处理系统的绿色指标体系,选取呼和浩特地区具有代表性、处理规模相近的2座中小型污水厂进行能耗评价。结果表明:处理能力利用率、处理工艺系统稳定性和污水厂高程布置所对应的3项评价指标在所选择的能耗影响因素中所占权重较大,分别为:0.143 0,0.302 4和0.145 6。进一步运用IPCC计算方法对污水处理厂进行碳排放概算,得出A、B污水处理厂的碳排放量分别为:19.401 t CO2/104t、18.378 t CO2/104t。A、B污水处理厂的实际比能耗分别为0.293 kW.h/m3、0.195 kW.h/m3。将碳排放数据与实际能耗情况对比得出:污水处理厂的能耗水平越高,单位碳排放量也越大。     

离子色谱法测定环境空气中丁酸

建立了用离子色谱法测定环境空气中丁酸的新方法。对实际样品进行分析,丁酸的回收率为94．5％-103．8％,当采样体积为60L时环境空气中丁酸的检出限为0．003mg／m^3。本方法分析速度快,所需样品量少,且无需复杂的前处理,简便、灵敏、可靠。     

抚顺市酸雨污染特征及变化趋势

在抚顺市酸雨监测数据分析的基础上,对抚顺地区的酸雨污染特征及其变化趋势和污染来源进行了探讨。     

Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets

A modified method of severe plastic deformation (SPD) entitled constrained groove pressing-cross route (CGP-CR) was introduced for imposing a high magnitude of equivalent strain of about 2.32 per pass on the sheet form samples. The major benefit of this improved route compared to previous common route was the more homogeneity of strain in the rolling (RD) and transverse (TD) directions of sheets. In this study, low carbon steel samples were used for examination of evolutions in microstructure and mechanical properties during SPD via CGP-CR process. Mechanical properties improvement were measured by tensile and macro hardness tests. The results indicate that CGP-CR process can effectively improve tensile strength; and also, yield stress and hardness of as-received low carbon steel samples were improved up to about 100% after two deformation passes. Also, high magnitude of inhomogeneity can be observed in hardness distribution through first pass of the process which diminishes in the subsequent passes. Microstructural evolutions during process were monitored by optical microscopy observations and X-ray diffraction analysis. The results demonstrate that initial ferritic microstructure with grain size of about 30 μm was refined to a 225 nm cell structure after two passes of CGP-CR process.     

离子色谱法测定废气中硫酸雾实验研究

文章建立了离子色谱法测定废气中硫酸雾的分析方法,制备好的样品经0．45um微孔滤膜抽滤,采用AS14A阴离子交换色谱柱分离,电导检测器检测,以0．8mmol／L碳酸钠和0．1mmol／L碳酸氢钠混合溶液为流动相,流速为0．5ml／min进行测定,以保留时间定性,峰面积进行定量,方法的适用范围为0．50～50mg／m3。与铬酸钡分光光度法进行比对试验,无显著性差异。该方法操作简便、灵敏度高、准确度好,实用性强,适用于大批量环境样品的分析。     

局地化工区污染案例的小气候特征分析研究

针对群众举报夜晚受不明气体污染中毒的两起事件,经过环保部门的现场勘查及监测,确定造成纺织厂污染的大气污染物为HCl气体,来自于纺织厂隔壁的农药厂装盐酸的空罐、罐区受污染的固体废弃物及受污染的土壤;助剂厂附近村民所受的污染物为HNO3、NO2和NOx气体,来自于助剂厂装硝酸的空罐、跑冒滴漏的废水废气、固体废弃物及受污染的土壤。夜晚气温降到露点,空气湿度达到饱和状态,气体污染物与空气中的水分结合形成对人体危害更重的酸或酸性气体;这两个工厂又都位于鸭绿江边的化工区内,具有局地小气候特征,夜晚易形成类似于海陆风的微风,形成局地污染。     

道化学公司指数法在罐区安全评价中的应用

采用道化学公司火灾、爆炸危险指数法对中国石化某厂综合储罐区进行安全评价,得出了其安全措施补偿前后的火灾、爆炸指数（F＆EI）、危险等级、暴露半径、暴露面积以及暴露体积等。结果表明,该企业综合储罐区采取的安全措施较为适用,能降低火灾、爆炸事故发生的概率和事故损害．