典型挥发性有机化合物在气体采样罐中的存储稳定性

选取了6种有代表性的挥发性有机化合物（VOCs）,异丙醇、二氯甲烷、乙酸乙烯酯、正己烷、苯和四氯化碳,实测了这些VOCs在气体采样罐（SUMMA罐）中的存储稳定性。结果表明：苯、正己烷和二氯甲烷在采样罐中均较稳定,其含量在84 d的存储期内基本无变化;乙酸乙烯酯在6个VOCs中最不稳定,在普通和惰性采样罐中含量均明显下降;异丙醇和四氯化碳的稳定性与采样罐的类型有关,在普通采样罐内含量下降明显,而在惰性采样罐内则相对稳定。实际监测工作中,为提高VOCs分析的准确性,如目标分析物有含氧类（醇,酮,酯等）或含卤素类VOCs,则采样后需尽快分析,同时尽量选择惰性采样罐为采样容器。     

环境土壤标准物质的研究与制备

用高铝陶瓷球磨加工在１２０℃下烘干３０ｈ的风砂土、黑土和暗棕壤土壤样品。用Ｘ－射线荧光光谱法等分析样品中Ｃｕ,Ｆ３,Ｔｉ等元素,做均匀度检验,结果表明样品均匀。定值分析采用ＮＡ、ＩＣＰ－ＭＳ等１８种不同原理的分析技术。在１年多时间里,用Ｘ－射线荧光光谱法做稳定性实验,表明样品稳定。在ＩＢＭ计算机上处理获取的全部数据。用Ｇｒｕｂｂｓ、多重比较Ｓ法等剔除离群值,求出最佳估计值。以最佳估计值按定值原则确     

A water quality monitoring network design methodology for the selection of critical sampling points: Part II

In order to resolve the spatial component of the design of a water quality monitoring network, a methodology has been developed to identify the critical sampling locations within a watershed. This methodology, called Critical Sampling Points (CSP), focuses on the contaminant total phosphorus (TP), and is applicable to small, predominantly agricultural-forested watersheds. The CSP methodology was translated into a model, called Water Quality Monitoring Station Analysis (WQMSA). It incorporates a geographic information system (GIS) for spatial analysis and data manipulation purposes, a hydrologic/water quality simulation model for estimating TP loads, and an artificial intelligence technology for improved input data representation. The model input data include a number of hydrologic, topographic, soils, vegetative, and land use factors. The model also includes an economic and logistics component. The validity of the CSP methodology was tested on a small experimental Pennsylvanian watershed, for which TP data from a number of single storm events were available for various sampling points within the watershed. A comparison of the ratios of observed to predicted TP loads between sampling points revealed that the model's results were promising.     

Assessment of the Usefulness of Semipermeable Membrane Devices for Long-Term Watershed Monitoring in an Urban Slough System

Semipermeable membrane devices (SPMDs) were deployed at eight sites within the Buffalo Slough, near Portland, Oregon, to (1) measure the spatial and seasonal distribution of dissolved polycyclic aromatic hydrocarbon (PAH) and organochlorine (OC) compounds in the slough, (2) assess the usefulness of SPMDs as a tool for investigating and monitoring hydrophobic compounds throughout the Columbia Slough system, and (3) evaluate the utility of SPMDs as a tool for measuring the long-term effects of watershed improvement activities. Data from the SPMDs revealed clear spatial and seasonal differences in water quality within the slough and indicate that for hydrophobic compounds, this time-integrated passive-sampling technique is a useful tool for long-term watershed monitoring. In addition, the data suggest that a spiking rate of 2–5 μg/SPMD of permeability/performance reference compounds, including at least one compound that is not susceptible to photodegradation, may be optimum for the conditions encountered here.     

Can pine needles indicate trends in the air pollution levels at remote sites?

Data from ten years of integrated monitoring were used here to evaluate whether pine needles are a feasible tool for an assessment of long-term trends of the atmospheric contamination. Pine needles collected once a year were compared to high volume air samples collected for 24 h, every 7 days, and passive air samples integrated over 28-day periods. Results showed the same concentration patterns of polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) captured in needles and high volume samples. Passive air samplers were less efficient in sampling the particle-bound compounds. Theoretical air volume equivalent to each needle sample (V_EQ) was calculated as a ratio of the needle concentration over the mean air concentration. Results indicated different equivalent volumes for PAHs and organochlorines, possibly due to the faster degradation rates of PAHs in needles. The most important finding is that in the long term a needle monitoring gives very similar information on temporal trends of the atmospheric pollution as does a high volume air monitoring.     

Levels of polycyclic aromatic hydrocarbons in Canadian mountain air and soil are controlled by proximity to roads

Concentrations of polycyclic aromatic hydrocarbons (PAHs) were measured in soil and XAD-based passive air samples taken from a total of 22 sites along three transects (Revelstoke, Yoho, and Observation, 6-8 sites for each transect) in the mountains of Western Canada in 2003-2004. Median concentrations in air (4-ring PAHs: 33 pg/m³) were very low and comparable to those in global background regions such as the Arctic. Low median soil concentrations (16 EPA PAHs: 16 ng/g dry weight) and compositional profiles dominated by naphthalene and phenanthrene are similar to those of tropical soils, indicative of remote regions influenced mostly by PAHs from traffic and small settlements. Comparing levels and composition of PAHs in soils between and along transects indeed suggests a clear relationship with proximity to local sources. Sampling sites that are closer to major traffic arteries and local settlements have higher soil concentrations and a higher relative abundance of heavier PAHs than truly remote sites at higher elevations. This remains the case when the variability in soil organic carbon content between sites is taken into account. Both air/soil concentration ratios and fugacity fractions suggest atmospheric net deposition of four-ring PAHs to soils.     

Estimating the Economic Value of National Parks with Count Data Models Using On-Site,Secondary Data: The Case of the Great Sand Dunes National Park and Preserve

We estimate an individual travel cost model for Great Sand Dunes National Park and Preserve (GSD) in Colorado using on-site, secondary data. The purpose of the on-site survey was to help the National Park Service better understand the visitors of GSD; it was not intended for a travel cost model. Variables such as travel cost and income were estimated based on respondents’ Zip Codes. Following approaches found in the literature, a negative binomial model corrected for truncation and endogenous stratification fit the data the best. We estimate a recreational benefit of U.S. $89/visitor/year or U.S. $54/visitor/24-h recreational day (in 2002 U.S. $). Based on the approach presented here, there are other data sets for national parks, preserves, and battlefields where travel cost models could be estimated and used to support National Park Service management decisions.     

A Comparison of Sampling Designs for Monitoring Recreational Trail Impacts in Rocky Mountain National Park

The dual goals of the Organic Act of 1916 and Wilderness Act of 1964 are to protect natural resources and provide quality visitor experiences. Park managers need metrics of trail conditions to protect park resources and quality of visitor experiences. A few methods of sampling design for trails have been developed. Here, we describe a relatively new method, spatially balanced sampling, and compare it to systematic sampling. We evaluated the efficiency of sampling designs to measure recreation-related impacts in Rocky Mountain National Park. This study addressed two objectives: first, it compared estimates of trail conditions from data collected from systematic versus spatially balanced sampling data; second, it examined the relationship between sampling precision and sampling efficiency. No statistically significant differences in trail condition were found between the 100-m interval and the spatially balanced datasets. The spatially balanced probability-based dataset was found to be a good estimate of trail conditions when analyses were conducted with fewer sample points. Moreover, spatially balanced probability-based sampling is flexible and allows additional sample points to be added to a sample.     

Atmospheric Volatile Organic Compound Monitoring. Ozone Induced Artefact Formation

Assessment of population exposure to VOC in ambient atmospheres is receiving heightened interest as the adverse health effects of chronic exposure to certain of these compounds are identified. Active (pumped) and passive samplers are the most commonly used devices for this type of monitoring. It has been shown, however, that these devices, along with all other preconcentration techniques, are susceptible to ozone interference. It is demonstrated that this interference occurs even at low ozone concentrations and that it may result in the under-estimation of population exposure. A convenient and effective ozone scrubbing method is identified and successfully applied and validated for both active and passive samplers for a range of VOC.     

Global Grids from Recursive Diamond Subdivisions of the Surface of an Octahedron or Icosahedron

In recent years a number of methods have been developed for subdividing the surface of the earth to meet the needs of applications in dynamic modeling, survey sampling, and information storage and display. One set of methods uses the surfaces of Platonic solids, or regular polyhedra, as approximations to the surface of the earth. Diamond partitions are similar to recursive subdivisions of the triangular faces of either the octahedron or icosahedron. This method views the surface as either four (octahedron) or ten (icosahedron) tessellated diamonds, where each diamond is composed of two adjacent triangular faces of the figure. The method allows for a recursive partition on each diamond, creating nested sub-dimaonds, that is implementable as a quadtree, including the provision for a Peano or Morton type coding system for addressing the hierarchical pattern of diamonds and their neighborhoods, and for linearizing storage. Furthermore, diamond partitions, in an aperture-4 hierarchy, provide direct access through the addressing system to the aperture-4 hierarchy of hexagons developed on the figure. Diamond partitions provide a nested hierarchy of grid cells for applications that require nesting and diamond cells have radial symmetry for those that require this property. Finally, diamond partitions can be cross-referenced with hierarchical triangle partitions used in other methods.