基于Monte-Carlo方法的静电除尘器除尘效率

针对经典除尘效率未考虑诸多随机因素影响的问题,提出了基于Monte-Carlo方法的效率分析模型,并通过实验数据验证其可靠性。通过该模型分析了粒径大小、电场气流速度、电晕电压、两极间距、粒子浓度等因素对收尘效率的影响规律,结果表明:基于Monte-Carlo方法的仿真结果精度更高,能有效预测静电除尘器的收尘效率,对于改进静电除尘器设计具有一定的理论意义和实用价值。     

新疆奎屯市17种落叶树种的滞尘能力研究

对奎屯市17种落叶树种进行了滞尘能力测定。结果表明,不同类型植物滞尘能力差异显著,灌木滞尘能力大于乔木。在11种落叶乔木中,滞尘能力最强的是圆冠榆,平均滞尘能力达3．6894g／m^2;在5种落叶灌木中,滞尘能力最强的是玫瑰,平均滞尘量可达3．6581g／m^2。     

Bioaccessibility of polychlorinated biphenyls in workplace dust and its implication for risk assessment

Human exposure to bioaccessible PCBs via indoor dust is limited around the world. In the present study, the workplace dust sample from commercial office, hospital, secondary school, shopping mall, electronic factory and manufacturing plant were collected from Hong Kong for PCBs analyses. Total PCBs concentrations ranged from 46.8 to 249 ng g⁻¹, with a median of 107 ng g⁻¹. Manufacturing plant showed the highest concentration among all of sampling sites. PCB 77 was found as the dominant congeners. The bioaccessibility of PCBs in small intestinal juice ranging from 8.3% to 26.0% was significantly higher than that in gastric condition, ranging from 4.8% to 12.4%. In addition, significant negative correlations (p < 0.05) were observed between K_OW and bioaccessibility for all workplace dust samples. Risk assessment indicated that the averaged daily dose of dioxin-like PCBs via non-dietary intake of workplace dust, considering the bioaccessibility of PCBs, were much lower than the TDI of dioxins (2.3 pg WHO-TEQ kg bw⁻¹ d⁻¹) established by Joint FAO/WHO Expert Committee on Food Additives.     

曝气沉砂池除砂机理分析

针对曝气沉砂池小试装置模型,通过配砂实验对沉砂池除砂率进行统计分析,研究曝气强度与HRT对沉砂池除砂率的影响。实验结果表明,不同曝气强度下,随着HRT变化,除砂率逐渐上升,并最终趋于平衡状态;不同HRT下,曝气强度与除砂率近似呈现一定的线性关系,且随着曝气强度的增大,除砂率降低;在HRT小于1min时,砂粒的运行路径和沉降时间缩短,不利于砂粒的去除;在HRT大于1min时,其中1、3和4min,随着气水比的增加除砂率降低幅度相对较小,曝气所引起的横向环流在一定程度上有利于砂粒的沉降,而HRT为2min时,除砂率降幅却很大,这与砂粒在曝气沉砂池池体断面分布有关,即断面处旋转流速和水平流速的大小变化将影响砂粒的运动;相比曝气强度,HRT对除砂率的影响较大。     

燃煤锅炉湿式脱硫除尘一体化设备的综合分析

本文对湿式脱硫除尘一体化设备的结构和性能进行了较为全面的分析,指出了该设备存在的诸多弊病,提出了解决方案--脱硫、除尘分体组合式的思路.     

河北省钢铁工业主要大气污染物减排潜力分析

通过对河北省钢铁工业存在问题的分析,得出我省钢铁行业主要大气污染物为二氧化硫和粉尘.结合我省钢铁企业的实际情况,从工程技术、政策管理等方面提出相应治理措施,并对"十一五"期间我省钢铁行业二氧化硫和粉尘减排效益进行预测.预测结果显示:采用所建议的减排措施后,我省钢铁工业二氧化硫减排量对全省"十一五"减排计划的贡献率为81.4%;粉尘可减排60%.     

A new tracer technique for monitoring groundwater fluxes: the Finite Volume Point Dilution Method

Quantification of pollutant mass fluxes is essential for assessing the impact of contaminated sites on their surrounding environment, particularly on adjacent surface water bodies. In this context, it is essential to quantify but also to be able to monitor the variations with time of Darcy fluxes in relation with changes in hydrogeological conditions and groundwater - surface water interactions. A new tracer technique is proposed that generalizes the single-well point dilution method to the case of finite volumes of tracer fluid and water flush. It is called the Finite Volume Point Dilution Method (FVPDM). It is based on an analytical solution derived from a mathematical model proposed recently to accurately model tracer injection into a well. Using a non-dimensional formulation of the analytical solution, a sensitivity analysis is performed on the concentration evolution in the injection well, according to tracer injection conditions and well-aquifer interactions. Based on this analysis, optimised field techniques and interpretation methods are proposed. The new tracer technique is easier to implement in the field than the classical point dilution method while it further allows monitoring temporal changes of the magnitude of estimated Darcy fluxes, which is not the case for the former technique. The new technique was applied to two experimental sites with contrasting objectives, geological and hydrogeological conditions, and field equipment facilities. In both cases, field tracer concentrations monitored in the injection wells were used to fit the calculated modelled concentrations by adjusting the apparent Darcy flux crossing the well screens. Modelling results are very satisfactory and indicate that the methodology is efficient and accurate, with a wide range of potential applications in different environments and experimental conditions, including the monitoring with time of changes in Darcy fluxes.     

内抽外压式集尘器实验、数值模拟与分析

根据内抽外压式集烟尘器专利研制了一个内抽外压式集尘器,并在井下进行实验。经过3种方法测试均收到预期的的效果,司机工作区达到了国家卫生要求,由于采用外筒压风,防止了瓦斯积聚避免瓦斯爆炸。应用离散颗粒模型模拟了内抽外压式集尘器内气相流场和粉尘颗粒的运动,该集尘器不仅把矿井巷道中细微可呼吸粉尘吸收到除尘器中,又能防止了瓦斯积聚。数值模拟与实验结果的一致性表明:把内抽外压式集尘器放置在掘进机前方,由于粉尘在气流的携带下运动使掘进机司机在矿井巷道中的工作环境得到改善,减少矿工患尘肺病的概率,开发了井下集尘的新工艺、新设备。     

矿井瓦斯煤尘爆炸传播数值模拟研究

基于连续相、燃烧、颗粒相数理方程建立瓦斯煤尘爆炸传播数理模型,并应用连续相、颗粒相计算方法,依据大型巷道瓦斯爆炸、瓦斯煤尘爆炸传播实验数据,借助普遍应用的流场模拟平台,成功开发瓦斯、煤尘爆炸数值模拟系统。该系统可有效地模拟煤矿瓦斯、煤尘的爆炸事故过程,对瓦斯爆炸的爆燃转爆轰、煤尘是否参与爆炸、爆炸冲击传播速度、衰减规律以及爆炸灾害的波及范围都能进行较准确的模拟。     

隔爆型电机在火炸药危险场所应用的安全性分析

针对普通隔爆型电机应用于火炸药粉尘危险场所的安全性问题进行定量分析,设计壳体粉尘侵入量试验,系统研究不同间隙下的粉尘侵入量,根据试验数据,应用曲线外推法及阿贝尔(Abel)余容状态方程计算爆压,结合材料力学及薄壁理论进行隔爆型电气设备外壳强度及刚度的校核。计算表明:若壳体内粉尘较均匀的悬浮在空中,切向应力与许用应力处于同一数量级;如果火炸药粉尘在轴承室、接线盒等局部堆积成火炸药层,切向应力比许用应力大两个数量级。试验结果强调:用于火炸药粉尘危险场所的电气设备必须有特殊的防爆结构设计,普通的隔爆电机用于火炸药粉尘危险环境时存在一定的安全隐患。