隔爆型电机在火炸药危险场所应用的安全性分析

针对普通隔爆型电机应用于火炸药粉尘危险场所的安全性问题进行定量分析,设计壳体粉尘侵入量试验,系统研究不同间隙下的粉尘侵入量,根据试验数据,应用曲线外推法及阿贝尔(Abel)余容状态方程计算爆压,结合材料力学及薄壁理论进行隔爆型电气设备外壳强度及刚度的校核。计算表明:若壳体内粉尘较均匀的悬浮在空中,切向应力与许用应力处于同一数量级;如果火炸药粉尘在轴承室、接线盒等局部堆积成火炸药层,切向应力比许用应力大两个数量级。试验结果强调:用于火炸药粉尘危险场所的电气设备必须有特殊的防爆结构设计,普通的隔爆电机用于火炸药粉尘危险环境时存在一定的安全隐患。     

Carbon capture and storage-desirability from a risk management point of view

Environmental and safety risks related to carbon capture and storage concern leakages and accidental releases during transport and geological storage. Based on principles widely accepted in the EU and beyond in the discussion about the where’s and why’s of nuclear waste repositories, this paper discusses the desirability of carbon capture and storage from a risk management point of view, focusing on environmental risks on the global level (climate change). On this basis it is concluded that, if the key energy issue of coming generations, not just in Europe but all around the world, is not the abundance of fossil resources but rather an unacceptably high probability of global warming due to greenhouse gas emissions, then the solution should not include any massive hiding of the emissions but entirely focus on the avoidance based on improved technology in power plants and other industrial installations.     

太阳能污泥干化在欧洲的应用

太阳能污泥干化指的是利用太阳能为主要能源对污水处理厂污泥进行干化和稳定化的污泥处理技术。该技术运用太阳能,借助传统温室干燥工艺,具有低温干化、运行费用低廉、操作简单、运行安全稳定、干化后的污泥仍保留原有的农用价值等特点。该文主要介绍了该工艺的工作原理及流程,工艺设计参数及其与传统热干化技术相比的优缺点,并简要介绍了该工艺在欧洲市场上的商业应用。     

苏州污水处理厂污泥干化工艺方案的比选

污泥处理及其处置所面临的重要问题之一,就是如何对城市污水处理厂产生的污泥进行有效减容,尽量降低对外部能源的需求。文中在掌握国内外污泥干化主要工艺技术的基础上,针对某城市污水处理厂的污泥干化工程,拟对采用燃煤烟气干燥、污泥消化一干化一体化、太阳能热泵干燥等三种不同污泥干化工艺进行物料、能量工艺核算。并在此基础上,计算初期投资与15年的运行费用总和。通过对燃料价格、环保和安全等影响因素的研究,分析比较了五种供热系统,以太阳能热泵供热系统为最优,值得大力推广和应用。     

杉木观光木混交林群落的能量生态

对杉木观光木混交林群落能量的研究结果表明：混交林中观光木地上部分灰分含量以皮最高,而杉则以叶最高,两者GCV（干重热值）和AFCV（去灰分热值）均以叶为最高;观光木、杉木地下各部分的灰分含量均随径级的减小而增加,GCV均以粗根最高,细根最低;观光木的平均灰分含量高于杉木,但GCV和AFCV均低于杉木;从乔木层、灌木层到草本层,灰分含量依次增加,GCV和AFCV则依次降低,混交林群落的能量现存量公占群落的很小一部分,而其能量年净增量、归还量和净固定量却占有一定比重,混交林群落的太阳能转化率为1.57%,而纯林为1.44%,表明杉观混交林是一种能量生产力较高和维持地力能力较强的杉阔混交类型。同时,混交林的能量累积比大于纯林,能量流动速率则低于纯林;乔木层的能量累积比高于林下植被,能量流动速率则低于林下植被,从能量的角度看,构建合理的群落结构必须选择高能量累积比的乔木层树种,同时须促进能量流动速率快的林下植被的发育以维持和提高地力。     

苯蒸气在有机膨润土上的吸附动力学

本文研究了苯蒸气在溴化十六烷基三甲基胺（CTMAB）系列单阳离子有机膨润土上的吸附动力学过程。结果表明,苯蒸气在有机膨润土上的吸附符合一级动力学方程,即：r＝KvCo;在12h内,吸附反应均可达到平衡,吸附速率常数（Kv）与温度（T）成正相关,吸附反应的活化能在9．50－17．92kJ.mol^-1之间。     

A method for evaluating transport energy consumption in suburban areas

Urban sprawl is a major issue for sustainable development. It represents a significant contribution to energy consumption of a territory especially due to transportation requirements. However, transport energy consumption is rarely taken into account when the sustainability of suburban structures is studied. In this context, the paper presents a method to estimate transport energy consumption in residential suburban areas. The study aimed, on this basis, at highlighting the most efficient strategies needed to promote awareness and to give practical hints on how to reduce transport energy consumption linked to urban sprawl in existing and future suburban neighborhoods. The method uses data collected by using empirical surveys and GIS. An application of this method is presented concerning the comparison of four suburban districts located in Belgium to demonstrate the advantages of the approach. The influence of several parameters, such as distance to work places and services, use of public transport and performance of the vehicles, are then discussed to allow a range of different development situations to be explored. The results of the case studies highlight that traveled distances, and thus a good mix between activities at the living area scale, are of primordial importance for the energy performance, whereas means of transport used is only of little impact. Improving the performance of the vehicles and favoring home-work give also significant energy savings. The method can be used when planning new areas or retrofitting existing ones, as well as promoting more sustainable lifestyles regarding transport habits.     

The effects of the Fukushima disaster on nuclear energy debates and policies: a two-step comparative examination

Under what conditions do critical events trigger large-scale public discussion and mobilisation, and can these lead to policy change? In a comparative study of nuclear energy policy after the Japanese Fukushima disaster in March 2011, a theory-development approach is adopted, mobilising data collected from national news agencies’ newswires, public surveys, legislation and parliamentary databases, and newspaper editorials in 12 established democracies between March 2011 and March 2013. The analysis suggests two main hypotheses that can guide future research: critical events are more likely to trigger policy change when intense (contentious) mobilisation from policy challengers aligns with the views of the general public, and is backed by major political allies; and critical events are more likely to trigger intense (contentious) mobilisation when policy challengers articulate their opposition around pre-existing policy debates on the issue and resort to pre-existing organisational and mobilisation resources.     

Forecasting China’s primary energy demand based on an improved AI model

An improved energy demand forecasting model is built based on the autoregressive distributed lag (ARDL) bounds testing approach and an adaptive genetic algorithm (AGA) to obtain credible energy demand forecasting results. The ARDL bounds analysis is first employed to select the appropriate input variables of the energy demand model. After the existence of a cointegration relationship in the model is confirmed, the AGA is then employed to optimize the coefficients of both linear and quadratic forms with gross domestic product, economic structure, urbanization, and technological progress as the input variables. On the basis of historical annual data from 1985 to 2015, the simulation results indicate that the proposed model has greater accuracy and reliability than conventional optimization methods. The predicted results of the proposed model also demonstrate that China will demand approximately 4.9, 5.6, and 6.1 billion standard tons of coal equivalent in 2020, 2025, and 2030, respectively.     

微生物-光-电化学耦合技术降解污染物和回收能源的研究进展

微生物电化学技术能同时实现污染物去除和能量回收,但存在污染物去除种类有限及产能效率低的局限,近几年将可再生的太阳能引入微生物电化学技术的微生物-光-电化学耦合技术应运而生。本文简要介绍了微生物-光-电化学耦合技术的发展背景和研究现状,对该技术现有的耦合形式进行分类,并对各种形式的耦合机理进行详细的阐释,最后对其未来的发展进行了展望。