Morphology of single inhalable particle inside public transit biodiesel fueled bus

In an urban-transit bus,fueled by biodiesel in Toledo,Ohio,single inhalable particle samples in October 2008 were collected and detected by scanning electron microscopy and energy dispersive X-ray spectrometry(SEM/EDS).Particle size analysis found bimodal distribution at 0.2 and 0.5 μm.The particle morphology was characterized by 14 different shape clusters:square,pentagon,hexagon,heptagon,octagon,nonagon,decagon,agglomerate,sphere,triangle,oblong,strip,line or stick,and unknown,by quantitative order.The square particles were common in the samples.Round and triangle particles are more,and pentagon,hexagon,heptagon,octagon,nonagon,decagon,strip,line or sticks are less.Agglomerate particles were found in abundance.The surface of most particles was coarse with a fractal edge that can provide a suitable chemical reaction bed in the polluted atmospheric environment.The three sorts of surface patterns of squares were smooth,semi-smooth,and coarse.The three sorts of square surface patterns represented the morphological characteristics of single inhalable particles in the air inside the bus in Toledo.The size and shape distribution results were compared to those obtained for a bus using ultra low sulfur diesel.     

郑州大气PM10的形貌特征及生物活性研究

采集郑州市区和郊区秋季大气PM₁₀样品,利用场发射扫描电镜（FESEM）和图像分析技术对PM₁₀颗粒进行形貌特征和粒度分布进行分析,同时应用质粒DNA评价法研究了市区和郊区PM₁₀样品的生物活性.结果显示,在市区采集的样品中燃煤飞灰占有相当大的数量,而在郊区采集的样品中矿物质占有较大的数量,粒径分析表明,市区PM₁₀的数量-等效球直径分布较为集中,主要分布在0.1～0.4 μm范围内,郊区则相对比较分散;PM₁₀的体积-等效球直径主要分布在>1 μm范围内.结果表明,在郑州市秋季大气PM₁₀中,数量上细粒子占优势, 而在体积上(质量上)较粗颗粒占优势.质粒DNA评价结果表明,郑州市区和郊区PM₁₀颗粒对DNA的损伤程度不同,市区样品的生物活性大于郊区样品.     

青岛华威风电场风能资源分析

根据华威风电场2008年4月1日-2009年3月31日一整年的测风仪测风资料,对风电场的风能资源各参数进行了详细地计算和分析,对风电场的风能资源进行评价,为当地的风能开发提供分析基础。     

复合式厌氧氨氧化反应器脱氮性能研究

采用低速机械搅拌装置,以无纺布作为固定床的填料,把搅拌床与固定床的优点有机结合起来,设计一种复合式厌氧氨氧化反应器.在反应器中,生物滞留量相对较高,微生物的性状由接种时的碎絮状很快转变成颗粒状,短期内反应器系统的脱氮性能迅速提高,启动时间大为缩短.仅用38d,反应器中总氮去除速率稳定增长至1.9kg·m·-3d-1.随...     

油包水型乳化液水击波速的分析

水击驻波场处理油包水型乳化液是一门新兴工艺,稳定驻波场的存在是破乳的关键,而水击压力波波速在驻波场形成中起着重要的作用。因此,为了更精确的求解水击波速,从W/O型乳化液两相流产生水击现象的特点出发,根据流体力学的连续性原理,推导其水击波波速的表达式,并与经典单相流水击波波速公式进行对比,通过MATLAB仿真分析与对比验...     

小风条件下大气扩散模式发展回顾研究

由于小风对污染事件的潜在影响,以及与中等风速和大风条件相比边界层结构、湍流和扩散的特殊性,常规的稳态高斯烟流模式在这种条件下具有局限性,建立适用于小风条件的大气扩散模式具有重要的理论和实际意义。本文回顾了近年来小风条件下大气扩散模式的建立和发展,从较简单的解析模式到复杂的数值模式,并对不同模式的参数化方案、与示踪物实验的比较结果、适用性和不足之处进行了总结。综合考虑不同模式的优劣,在应用方面有利于根据实际情况选择合适的模式,在模式开发方面,有助于建立更加完备的大气扩散模式。     

Improved electrospray design for aerosol generation and flame propagation analysis

Although the hazards of aerosol fires and explosions have been studied for decades the data for aerosol flame propagation is still scarce. Additionally there is a lack of standard techniques and measurement apparatus, which impedes the development of optimal aerosol hazard mitigation measures. The focus of this study is development of an improved aerosol electrospray device for the generation of high quality aerosol data. The goal is achieved through higher nozzle packing, precise nozzle and mesh hole alignment and adding two ground meshes. In addition to a flat ground mesh, the utilization of a cylindrical ground mesh demonstrated improved confinement and guidance of droplets. Duratherm 600, heat transfer fluid, was examined to demonstrate the modified electrospray device capabilities as compared to previous design. Results show the modified electrospray can produce more uniform droplets, more even test chamber dispersion, smaller droplet size and higher concentration aerosol, which is essential to study aerosol flame propagation. Accordingly, the results of aerosol flame speed tests for the improved design were more reproducible. Moreover, it was found that a traditional propane pilot flame was unable to ignite the smaller aerosol droplet size due to the strong turbulence generated by the open flame. However, by careful modification of the pilot flame length, the turbulence decreased dramatically and the small droplet size aerosol can be tested.     

Experimental Study on the Influence of Rotational Speed on the Performance of a Single-screw Expander with a 175 mm Screw Diameter

A single-screw expander has been designed and manufactured independently. Based on this prototype, testing system has been built and performance experiment has been made. In this article, compressed air was used as working fluid and performance test for the prototype was finished at conditions including different rotational speed and different inlet pressure.

From the experimental data, it is shown that when inlet pressure less than 0.8MPa the output power increases with the increase of rotational speed because of not enough expansion; when inlet pressure more than 0.8MPa, the every biggest output power is appeared in the condition of rotational speed 2600 rpm. The test results also show that the total efficiency is influenced by rotational speed obviously, and the highest total efficiency of this machine is 69.64% in the condition of 3000 rpm and 15 bar.     

元宵节期间北京PM_(2.5)单颗粒的物理化学特征

采集2014年元宵节期间北京PM2.5样品,使用场发射扫锚电镜-能谱仪观察北京PM2.5单颗粒的显微形貌和元素组成,并利用图像分析系统对PM2.5的粒径进行分析.结果表明:PM2.5的单颗粒类型以烟尘集合体、矿物颗粒和飞灰为主;烟花爆竹燃放产生的PM2.5是造成元宵节期间北京PM2.5浓度升高的主要原因;PM2.5中总颗粒物个数呈现先升高后降低的趋势;元宵节期间北京PM2.5中大部分颗粒物的粒径小于0.7μm;然而,重污染天气PM2.5中粒径大于0.7μm颗粒物的数量明显高于轻污染天气.     

Effects of vent layout and vent area on dynamic characteristics of premixed methane-air explosion in a tube with two side-vented ducts

To further elucidate the influence mechanism of side vents on the dynamic characteristics of gas explosions in tubes is helpful to design more reasonable vent layouts. In this paper, 9.5% methane-air explosion experiments were conducted in a tube with two side-vented ducts, and the effects of vent layouts and vent areas on the dynamic characteristics of explosion overpressure and flame propagation speed were investigated. The results demonstrate that under the same condition with a single vent area of 100 mm × 100 mm, when only the end vent is open, the maximum explosion overpressure and the maximum flame propagation speed are the highest among the five vent layouts. When the side vents 1 and 2 and the end vent are open, the maximum explosion overpressure is the lowest, and an unusual discovery is that the flame front changes into a hemispherical shape, finger shape, quasi-plane shape, tulip shape and wrinkled structure. When only side vent 1 is open, a unique Helmholtz oscillation occurs, and a new discovery is that there is a consistent oscillation relationship among the overpressure, flame propagation speed and flame structure. Helmholtz oscillation occurs only when a single vent area is 100 mm × 100 mm–60 mm × 60 mm, and the oscillation degree decreases with decreasing vent area. During the vent failure stage, the maximum explosion overpressure is generated, the flame front begins to appear irregular shape, and the flame propagation speed shows a prominent characteristic peak. After the vent failure stage, the driving effect of the end vent on the flame is higher than that of the side vent on the flame. Furthermore, the correlation equations of the mathematical relationships among the maximum explosion overpressure P_red, the static activation pressure P_stat and the vent coefficient K_v under four vent layouts are established, respectively.