海水环境生物腐蚀污损与防护

以海水环境生物腐蚀污损与防护为中心,就国内外与其相关的报道进行综述分析,并提出建议。首先,分析污损生物的分布与特征,得出污损生物群落的组成和结构对海域、季节、水深、工程结构类型等的依赖性,突出海水环境生物腐蚀污损的复杂性。然后,解析生物附着污损对海水环境腐蚀速率的影响,突出附着生物是导致金属材料腐蚀速率增大的重要因子。再次,介绍海水环境生物腐蚀污损防护技术的现状,分析主要防护技术的优缺点,并展示其在不同行业的联用。最后,提出对海水环境生物腐蚀污损研究工作的建议,包括建立各海域的生物腐蚀污损数据库、大力研制发展绿色生物腐蚀污损控制技术、加强对海洋生物腐蚀污损基础性研究工作的投入、尽快建立海洋生物腐蚀评价标准和规范等。     

厚壁管变形横波周向超声检测工艺及缺陷定位系统开发

在理论研究的基础上，利用试块对厚壁管变型横波与折射横波检测灵敏度进行了比较，证实了变型横波在厚壁管件中的检测灵敏度高于折射横波；设计开发计算软件，实现缺陷进行自动定位，大大提高现场检测效率和定位精度。     

中小城市污水排水问题及对策研究

为解决中小城市污水排水问题,进一步加强城市排水管理,改善城市水环境,杜绝雨污混排,提高污水处理率,分析和探讨了中小城市在污水排水系统建设、管理、维护中存在的问题,针对排水法规不健全、污水管网不完善、雨污分流难、管理不到位等问题进行原因分析,提出加强排水制度建设、加快排水设施的建设、加强排水管理、加强宣传教育等措施.     

Numerical parametric study of a new earth-air heat exchanger configuration designed for hot and arid climates

ABSTRACT

Thermal potential for cooling and heating can be achieved by new configuration of earth–air heat exchanger (EAHE). This paper presents a numerical investigation of thermal performance of a spiral-shaped configuration of EAHE intended for the summer cooling in hot and arid regions of Algeria. A commercial finite volume software (ANSYS FLUENT) has been used to carry out the transient three-dimensional simulations and the obtained results have been validated using the experimental and numerical data obtained from the literature. The agreement between our simulation results and those from literature is very satisfactory. A parametric analysis of the new geometry of (EAHE) has been performed to investigate the effect of pitch, depth, pipe length and of the flow velocity on the outlet air temperature and the EAHE’s mean efficiency as well as its coefficient of performance (COP). It has been shown that when the pitch space varies between 0.2 and 2 m the difference of outlet air temperature increases by 6 ^°C. When the air velocity increases from 2 to 5 m/s the mean efficiency decreases from 60 % to 33 % and the COP of the EAHE decreases from 2.84 to 0.46.     

长江三峡花岗岩坡面林地土管特性及其对管流的影响

相互连通具有一定通透性的土壤大空隙称为大孔隙,亦可称其为土管。根据土管成因不同将其分为四种类型,即土壤动物流动导致的土管、植物根系形成的土管、土壤裂隙形成的土管和土壤水分运动形成的土管。在长江三峡花岗岩地区至少存在两种成因的土管,即植物死亡根系形成的（生物性）土管和由土壤裂隙形成的（地质性0土管。由降雨导致水分在土壤大孔隙中的运动过程称为管流,管流是优先流的主要形式之一。管流的产生对于降雨而言具有一定的滞后性（管流开始出现一般较开始降雨时间推迟3－4小时）,管流的产生与降雨强度、降雨量和土壤水力特性等要素有关,相同条件下管流流量和降雨强度及降雨量呈正相关,管流特性不仅与土管的成因有关,而且与土管在土壤剖面的位置也有一定关系。由于土管内部粗糙程度和分枝合流情况不同,土壤前期降雨量、本次降雨强度影响也造成管流的水文过程产生差别。     

PEAKING STORAGE TANKS FOR WATER SUPPLY SYSTEMS1

ABSTRACT: Construction of a “peaking storage tank” may reduce the operational cost of municipal water in the availability of a time-of-use energy rate. A peaking storage tank is used for storing water that is pumped from wells or other sources of supply during off-peak periods when energy costs are less for use during periods of on-peak water demand. The optimal size of a peaking storage tank is that which results in the minimum total cost, which includes both the storage construction cost and the cost of operation of the pumps. The operational cost for a given time-of-use rate is determined by help of a pipe network simulation model solved by the Newton-Raphson technique and a dynamic programming optimization model. A more simplified method is also introduced. Analyses show that low off-peak energy costs make the construction of peaking storage tanks economically attractive and reduce on-peak energy use, which results in electrical load leveling.     

ADVANCES IN THE BOUNDARY INTEGRAL EQUATION METHOD IN SUBSURFACE FLOW1

ABSTRACT: This paper explores some of the advances of the boundary element method, as applied to ground-water problems, during the last five years. Although the method is still somewhat limited compared to solution by finite elements, the range of solutions has increased considerably. Diffusion and advection-diffusion solutions are done efficiently. These include the incorporation of inhomogeneity, anisotropy, and nonlinear diffusion. The difficult problem of stream-aquifer interaction is an important application as it is much easier to follow a free surface with its multiple configurations. The application must be able to cycle between ground-water connection and disconnection with the stream and include seepage surfaces. Flow in fractured media is a natural application where the flow in fractures can usually be treated without a computational exception in spite of extremely high aspect ratios. The case of seawater intrusion forms a type of free surface problem and thus is a case for which the method has special advantages. For these and other applications the boundary element method provides an inexpensive technique for calculation where the data preparation and setup time is minimal. In most of these cases, programs can and have been written on microcomputers.     

Geostatistical analysis as applied to two environmental radiometric time series

This article details the results of an investigation into the application of geostatistical data analysis to two environmentalradiometric time series. The data series employed consist of ⁹⁹Tc values for seaweed (Fucus vesiculosus) and seawater samples taken as part of a marine monitoring program conducted on the coast of northern Norway by the Norwegian Radiation Protection Authority. Geostatistical methods were selected in order to provide information on values of the variables at unsampled times and to investigate the temporalcorrelation exhibited by the data sets. This information is ofuse in the optimisation of future sampling schemes and for providing information on the temporal behaviour of the variablesin question that may not be obtained during a cursory analysis.The results indicate a high degree of temporal correlation withinthe data sets, the correlation for the seawater and seaweed databeing modelled with an exponential and linear function,respectively. The semi-variogram for the seawater data indicatesa temporal range of correlation of approximately 395 days with noapparent random component to the overall variance structure and was described best by an exponential function. The temporal structure of the seaweed data was best modelled by a linear function with a small nugget component. Evidence of drift was present in both semi-variograms. Interpolation of the data setsusing the fitted models and a simple kriging procedure were compared, using a cross-validation procedure, with simple linearinterpolation. Results of this exercise indicate that, for theseawater data, the kriging procedure outperformed the simpleinterpolation with respect to error distribution andcorrelation of estimates with actual values. Using theunbounded linear model with the seaweed data produced estimatesthat were only marginally better than those produced by thesimple interpolation.     

NH4NO3-Pd(NO3)2联合基体改进剂石墨炉法测海水中痕量镉

用NH4NO3-Pd(NO3)联合基体改进剂,石墨炉法直接测海水中痕量镉.通过不同条件的实验,确定了最佳的分析条件;并通过对实际样品平行性和加标回收率的测定,验证了方法的精密度和准确度.建立了空白实验,在0.19～5.0μg/L线性范围内,镉的最低检出限为0.19μg/L.实验结果表明,该方法快速方便,提高了分析效率,准确度高,精密度好.     

深圳妈湾排海工程非设计条件下海水入侵与冲洗研究

本文从微观的角度，分析了排海工程扩散管内海水入侵与冲洗的临界水力特点，并通过理论分析和物理模型试验的相互验证，得出了上述临界水力条件的判别关系式，提出了判别方法，并由此得到了深圳妈湾排海工程防止海水入侵的临界排放流量和出现海水入侵后的最小冲洗流量，为排海工程在非设计条件下的运行管理提供了依据。