杭州无车日大气细颗粒物化学组成形成机制及光学特性

在世界无车日期间对PM2.5化学组分、光学参数及气态污染物进行同步监测,评估机动车尾气排放对杭州市细颗粒物污染及能见度的影响.结果表明:管制期间NO2、NOx、CO和PM2.5浓度分别为45.0, 50.8, 1119, 85.8μg/m3,比平日分别下降了17.5%、23.3%、20.6%和32.6%.管制期间PM2.5中OC、EC和二次无机组分浓度为8.58, 4.29, 25.95μg/m3,比管制前下降了13.8%、12.6%和15.7%,管制后则达到20.24, 10.85, 27.39μg/m3,上升了136.0%、152.7%和5.5%.管制期间较高的NO3-/PM2.5和NOR(0.15)表明PM2.5的形成更多受二次无机转化影响,管制后PM2.5中上升的OC、EC比例和较低的NOR(0.07)则说明PM2.5主要来自机动车排放的碳质组分的贡献.硫酸盐、硝酸盐、有机气溶胶和EC是最主要的消光组分,共解释了总消光系数的74.0%~89.7%.管制后,机动车排放的有机物和EC消光比例达到26.6%和24.6%,大气消光系数则达到438.7Mm-1,比管制期间上升了60.5%,表明机动车污染排放已成为影响杭州大气细颗粒物污染和能见度下降的重要因素.     

Lead-210 and Beryllium-7 in the Aerosol Particles Around Taiwan Off-Shore Areas

Abstract

Distributions of ²¹⁰Pb and ⁷Be in the aerosol particles of different size fractions were measured around Taiwan offshore areas from October, 1994 to October, 1995. the size distribution and abundance of the aerosol particles showed both spatial and temporal variations. the particle concentrations off northwestern Taiwan were more than twice as those off northeastern Taiwan both in November and March, and the values were much higher in November than in March for both areas. the measured particle concentrations, except for one sample with an unusually high value, ranged from 10 to 83 μOgm ^?3 in the study areas. the ²¹⁰Pb concentrations in the aerosol particles filtered from the air mass varied between 20 × 10^?3 and 72 × 10^?3 dpm m^?3 (1dpm = 0.45 pCi). the ²¹⁰Pb concentrations in the area off southwestern Taiwan appeared somewhat higher than in other areas and were probably contributed by the land air from Taiwan which contains higher ²¹⁰Pb in winter. the ²¹⁰Pb concentrations off northern Taiwan were low in November when the aerosol concentrations were high, but they were high in March when the aerosol concentrations were low.

Based on the ⁷Be monitoring records of 20 years on the aerosol particles of the island by the Taiwan Radiation Monitoring Center, the mean settling rate averaged 0.91, 0.79 and 0.68 cm s^?1, respectively, in northern, central and southern Taiwan. with these values and the ²¹⁰Pb concentrations in the aerosols, the ²¹⁰Pb flux was determined to be between 0.58 and 2.30 dpm cm^?2y^?1, with an average of 1.19 dpm cm^?2y^?1. Excluding the highest value due to its extremely high ²¹⁰Pb and aerosol concentrations, the average is reduced to 1.05 dpm cm^?2y^?1. the activity median diameters (AMD) for ²¹⁰Pb in the study areas were between 0.69 and < 0.49 μM with a mean of 0.5 öm based on ²¹⁰Pb distributions in different particle size fractions. Thus, ²¹⁰Pb was preferentially adsorbed on to the submicron particles. ⁷Be in the study areas showed a good correlation with ²¹⁰Pb in total activity although the two nucides had different sources.     

PCDD/Fs emission, risk characterization, and reduction in China’s secondary copper production industry

Secondary copper production is one of the key polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) emission sources in China, but research and data on this issue are rare. In 2004, when the Stockholm Convention entered into force in China, PCDD/Fs emissions from secondary copper production contributed to 32.2% of the total release. In this paper, PCDD/Fs emission dynamics from secondary copper industry were discussed and cumulative risks were characterized. From 2004 to 2009, industrial policies played an indirect role in PCDD/Fs reduction, but its effects are still limited. The Yangtze River Delta, Pearl River Delta and central regions were among the top three of dioxin emissions from secondary copper production in China. Shanghai, Shandong, Zhejiang, and Jiangxi had comparatively higher accumulated risk and were recommended as the priority regions for promoting PCDD/Fs emission control in China. From 2009 to 2015, the PCDD/Fs emission dynamics in the secondary copper industry were presented through simulation. PCDD/Fs emission equations were established, resulting in the recommendation of control technology conversion rate at 30% for small scale smelters and 51%–57% for large and medium-sized enterprises in 2015. In conclusion, both indirect policy and direct control technology retrofitting should be integrated for more effective PCDD/Fs emission reduction in secondary copper industry.     

广州地区紫外辐射特征和模式对比分析

根据中国气象局广州热带海洋气象研究所的紫外观测数据,研究了广州的紫外辐射季节变化,结果表明,2005年和2006年广州各月份紫外辐射强度的极值的最大值都出现在7月,2006年的达到了55.48W/㎡,极值的最小值也都出现在1月,2005年最小只有23.17W/㎡.利用NCAR(美国大气研究中心)的TUV模式,模拟研究了2005年11月16~29日一次从清洁到灰霾过程的典型个例,模拟的结果与实际观测基本一致,模式研究表明,在污染较轻时,TUV模式能够很好的模拟晴天紫外辐射的日变化,模式与实测之间有约7%~15%的误差. 随着污染的加剧,模式的偏差也变大.气溶胶对紫外辐射的影响相当大,在气溶胶污染严重时可使紫外辐射降低40%,气溶胶对紫外辐射的短波谱也有较大的影响,随着污染的加重,对紫外辐射的短波衰减会加强.     

近3年西双版纳州勐腊县大气污染基本特征及污染原因分析

对西双版纳州生态环境局勐腊分局2017年8月-2020年8月逐日空气质量数据的分析表明,2-4月是勐腊县空气质量指数（Air Quality Index,AQI）频繁达到二级及以上的时段,空气质量分指数（Individual Air Quality Index,IAQI）能够达到二级及以上标准的污染物为PM_2.5、PM₁₀、O₃、SO₂中的一种或几种,PM_2.5、PM₁₀污染较为严重,PM_2.5对空气质量的影响最大,可使空气质量达到重度污染,混合污染出现比例远大于单一污染.2019、2020年3-4月勐腊县轻度及以上连续污染日数超过5 d的5次过程中,4次污染过程的主要潜在源区在勐腊上风方向老挝西北部及泰国与其相邻的区域,权重潜在源贡献因子（Weight Potential Source Contribution Function,WPSCF）大于0.6的区域与同年3、4月泰国西北部、老挝西北部的火点密集区有较好的对应关系,4次污染过程与老挝西北部及泰国与其相邻区域的生物质燃烧关系密切;1次污染过程的主要潜在源区主要在当地,当地建筑施工、交通运输、生物质燃烧和餐饮行业细颗粒物的排放会导致勐腊县空气质量出现明显下降.为验证勐腊县连续污染过程受到了周边国家烧荒的影响,利用逐日气溶胶光学厚度（Aerosol Optical Thickness,AOT）对2020年3月23-4月9日的污染过程进行了个例分析,发现AOT大值区位于勐腊上风方向,高浓度污染物持续稳定地向勐腊传输导致勐腊出现持续重污染.     

广东省家具行业基于涂料类型的VOCs排放特征及其环境影响

为掌握不同涂料类型废气之间的排放差异,基于溶剂型、水性、溶剂型辐射固化（ultra-violet,UV）、水性UV和粉末等不同涂料类型,选取典型家具制造企业进行废气采样,对比研究不同涂料类型废气挥发性有机物（volatile organic compounds,VOCs）排放浓度和组分差异,并对不同涂料类型废气的臭氧生成潜势（ozone formation potential,OFP）和二次有机气溶胶生成潜势（secondary organic aerosol formation potential,SOAFP）进行分析.结果表明,溶剂型涂料废气的总挥发性有机化合物（total volatile organic compound,TVOC）浓度、OFP和SOAFP均高于水性、溶剂型UV、水性UV和粉末涂料废气.不同涂料类型有组织废气VOCs浓度水平和组成差异较大.溶剂型涂料和溶剂型UV涂料废气以芳香烃和含氧挥发性有机物（oxygenated volatile organic compounds,OVOCs）为主,芳香烃的占比分别为41.91%~60.67%和42.51%~43.00%,OVOCs的占比分别为24.75%~41.29%和41.34%~43.21%.水性涂料、水性UV涂料和粉末涂料废气中VOCs占比最高的是OVOCs,占比分别为54.02%~62.10%、55.23%~64.81%和42.98%~46.45%.溶剂型涂料废气的主要组分为苯乙烯（14.68%）,水性涂料废气的主要组分为甲缩醛（14.61%）,溶剂型UV涂料和水性UV涂料废气的主要组分均为乙酸丁酯（15.36%和20.56%）,粉末涂料废气的主要组分是3-乙氧基丙酸乙酯（20.19%）.芳香烃对溶剂型涂料和溶剂型UV涂料废气的OFP贡献最大,分别为79.84%和80.32%.水性涂料和水性UV涂料废气OFP的主要贡献者是芳香烃（51.48%和36.71%）和OVOCs（42.30%和41.03%）.芳香烃（43.46%）、OVOCs（28.06%）和烯烃（25.24%）是粉末涂料OFP的主要贡献者.芳香烃是溶剂型涂料、水性涂料、溶剂型UV涂料、水性UV涂料和粉末涂料废气SOAFP的绝对贡献者,占比均超过99%.     

黄渤海气溶胶光学厚度的多源卫星遥感产品精度分析和时空分布特征研究

以黄渤海上空大气为目标研究区,基于AERONET观测网,获取该区域2015—2017年的气溶胶光学厚度（AOD）实测数据,并对可见红外成像辐射计VⅡRS,中分辨率成像光谱仪MODIS,静止水色卫星成像仪GOCI与新一代地球同步气象卫星AHI H8的AOD遥感产品展开精度验证.同时,利用长时间的遥感影像探究并分析AOD在不同时空尺度下的分布特征与变化情况.结果表明：同其它AOD遥感产品相比,GOCI AOD展示出了高采样频率及高精度的特性.此外,在研究区域AOD的逐小时遥感影像中未发现明显的变化规律,而月平均图则显示出从黄渤海西部至中部再到东部AOD逐渐递减的趋势,且该趋势在研究区域不同的地方是具有差异的.不仅如此,本文还尝试分析影响AOD反演精度的潜在因子,发现其可能与地表反射率提取的准确度与预设气溶胶模型设置的合理性有关.     

辽宁地区大气黑碳气溶胶质量浓度在线连续观测

利用2008年3月—2009年2月辽宁沈阳、大连、鞍山、抚顺和本溪ρ(黑碳)观测资料,分析了其变化特征及重要影响因子. 结果表明,5个城市小时ρ(黑碳)的变幅较大,最小值出现在抚顺秋季的2008年9月23日00:00,ρ(黑碳)为0.14 μg/m3,最大值出现在本溪冬季的2008年11月11日08:00,ρ(黑碳)为64.52 μg/m3;本溪ρ(黑碳)日均值最高,为6.87 μg/m3,其次是沈阳、鞍山和抚顺,大连的ρ(黑碳)日均值最小,为3.18 μg/m3;ρ(黑碳)日变化有明显的峰值和谷值,最高值一般出现在06:00─09:00和17:00─19:00,低值出现在02:00─04:00和12:00─15:00;风速对ρ(黑碳)有重要影响,当风速<3.5 m/s时,ρ(黑碳)随风速增大而减小,当风速>3.5 m/s时,风速对ρ(黑碳)的影响不大;后向风轨迹较好地反映污染物在不同城市区域间的传输特征,在冬季沈阳以上风区域北部影响为主;ρ(黑碳)日均值变化和大气低层垂直温度梯度变化有较好的对应关系.      

桂西北喀斯特区原生林与次生林凋落物及养分归还特征比较

森林凋落物是森林生态系统的重要组成成分,其养分归还量在一定程度上决定着土壤养分有效性的高低。在土层浅薄且土被很不连续的我国喀斯特区域进行凋落物生物量及养分归还研究对我们更深刻地了解该区养分循环具有至关重要的意义。本文比较分析了桂西北喀斯特区3种原生林与3种次生林的全年凋落物量、组成、月凋落物量动态及养分归还量与动态。结果表明,圆果化香(Platycarya longipes Wu)、大叶蚊母树(Distylium Sieb.et Zucc.)与青檀(Pteroceltis tatarinowii Maxim.)3种原生林的年凋落物总量分别为2342.16,4057.99和1834.36kg·hm-2,而圆叶乌桕(Sapium rotundifolium Hemsl.)、八角枫(Alangium chinense(Lour.) Harms)和黄荆(Vitex negundo L.)3种次生林的年凋落物总量分别为3192.82,3284.26,2469.90kg·hm-2,除大叶蚊母树外,次生林年凋落物总量大于原生林。凋落物的组成中,叶凋落生物量均占总凋落物量的80%左右,甚至更高,而圆叶乌桕、八角枫和黄荆3种次生林群落的叶凋落物量占总凋落物量的百分比大于圆果化香、大叶蚊母树以及青檀3种原生林。凋落物的养分归还量的月动态与凋落物量的月动态一致,原生林呈"U"形曲线,而次生林则呈"W"形曲线。原生林和次生林凋落物的年养分归还量均为C﹥N﹥K﹥P,且次生林的C、N、P养分的归还量大于原生林。     

Investigation of Blended Fibre Filtering Materials

Five variants of mixtures of different synthetic fibres at different area ratios were manufactured into needled nonwovens intended to be used as a filtering material for respiratory protection. Two variants were produced according to an earlier patent, and the contents of the other three was completely new. Samples of the nonwovens were tested for sodium chloride particles penetration and for breathing resistance. The results showed that one variant of a nonwoven, designated PP/PPFM, had very valuable filtering properties and that those properties were stable in time.