青岛市大气颗粒物来源的定量解析——化学质量平衡方法

在青岛采集了夏、冬两季的飘尘样品。用10μm入口切割和两级核孔膜滤膜,实现了飘尘粗、细颗粒的分极采样。分别用扫描电镜-X射线能谱分析技术和多元素化学分析数据的因子分析方法,定性识别排放源。用化学质量平衡方法定量解析源贡献:土壤扬尘和燃煤飞灰,硫酸盐二次颗粒物,以及海盐颗粒是3种主要来源;汽车尾气和2种工业排放的贡献较小。根据定量解析的结果,论述源排放的粒径分布和季节变化的特点。      

大气气溶胶对气候与生态系统影响的综合评述

在广泛收集国内外有关大气气溶胶对气候与环境生态系统影响文献的基础上,对我国大气气溶胶的排放状况、大气气溶胶对气候系统直接和间接影响研究以及大气气溶胶的气候和生态环境效应等方面做了综合评估。      

北京市不同区域大气气溶胶粒子中水溶性离子的特征

在北京市两个区域同时采集不同粒径的气溶胶粒子,利用离子色谱分析了样品中的水溶性无机离子组分．研究发现,城乡结合带采集的总水溶性离子浓度比郊区高．两地水溶性离子浓度有明显的季节变化趋势,SO4^2-浓度冬季最高,而夏季许多离子浓度普遍较低,NO3^-质量中值直径随季节变化有明显的不同．Na^ 浓度受地表植被影响较大．两地NO3^-,SO4^2-,NH4^ ,K^ 四种离子间的相关系数很好,可能是因为这些离子的来源相似．     

飞行时间二次离子质谱法在一次污染过程中PM2.5表面组分分析中的应用

团簇离子源的发明和使用,使飞行时间二次离子质谱（TOF-SIMS）法成为材料表面化学分析越来越重要的手段,TOF-SIMS法的主要测试功能包括表层质谱、化学成像及深度剖析3种。采用TOF-SIMS法对一次污染过程中的大气细颗粒物（PM_2.5）的表层进行检测,得到了PM_2.5表面成分的质谱及成像信息。结果表明：PM_2.5表层存在多种金属离子,通过扫描电子显微镜能谱仪的形貌与飞行时间二次离子质谱仪的成像亮度分析可知,K⁺、Na⁺、Mg²⁺响应强度相对较强,含量较高;通过原子吸收光谱仪进行金属离子定量可知,2018年11月4日和12月24日的K⁺、Na⁺、Mg²⁺的平均质量分别为1.809 5、0.443 8、1.526 2 mg;从形态分布上看,PM_2.5表面烟尘集合体含量较多,其次为燃煤飞灰、矿物颗粒和超细未知颗粒;PM_2.5表层的有机物离子C_xH_y片段也较多,经过m/z的测试数据进一步确定,表明颗粒物表层含有大量的脂肪烃和芳香烃;除此之外,还存在含N、O、S等的有机物和无机物。     

连云港黑碳气溶胶污染特征研究

采用2016年大气多参数站监测数据,分析连云港市大气中ρ(黑碳气溶胶)的小时及月度变化规律,结果表明,观测期间,黑碳气溶胶与NO_2、CO、PM_(10)、PM_(2.5)显著相关,与风速、能见度等呈负相关;黑碳气溶胶年均值为2.10μg/m~3,日变化呈明显双峰型,峰值出现在08:00和21:00左右;从季节看,ρ(黑碳气溶胶)冬春季高、夏秋季低;在不利气象条件时,ρ(黑碳气溶胶)有所增高,通过模型分析化石燃料燃烧产生的黑碳占比增大,说明在不利气象条件时,化石燃料燃烧产生的黑碳是影响ρ(黑碳气溶胶)及ρ(颗粒物)上升的主要因素。     

Secondary collisions and injury severity: A joint analysis using structural equation models

Objective: This study aims to investigate the contributing factors to secondary collisions and the effects of secondary collisions on injury severity levels. Manhattan, which is the most densely populated urban area of New York City, is used as a case study. In Manhattan, about 7.5% of crash events become involved with secondary collisions and as high as 9.3% of those secondary collisions lead to incapacitating and fatal injuries.

Methods: Structural equation models (SEMs) are proposed to jointly model the presence of secondary collisions and injury severity levels and adjust for the endogeneity effects. The structural relationship among secondary collisions, injury severity, and contributing factors such as speeding, alcohol, fatigue, brake defects, limited view, and rain are fully explored using SEMs. In addition, to assess the temporal effects, we use time as a moderator in the proposed SEM framework.

Results: Due to its better performance compared with other models, the SEM with no constraint is used to investigate the contributing factors to secondary collisions. Thirteen explanatory variables are found to contribute to the presence of secondary collisions, including alcohol, drugs, inattention, inexperience, sleep, control disregarded, speeding, fatigue, defective brakes, pedestrian involved, defective pavement, limited view, and rain. Regarding the temporal effects, results indicate that it is more likely to sustain secondary collisions and severe injuries at night.

Conclusions: This study fully investigates the contributing factors to secondary collisions and estimates the safety effects of secondary collisions after adjusting for the endogeneity effects and shows the advantage of using SEMs in exploring the structural relationship between risk factors and safety indicators. Understanding the causes and impacts of secondary collisions can help transportation agencies and automobile manufacturers develop effective injury prevention countermeasures.     

某沿海城市典型行业NMHCs排放特征及对二次污染物生成潜势研究

采用SUMMA罐采样、GC-FID技术分析了威海市渔具、造船和橡胶等6种典型行业代表企业废气中59种非甲烷碳氢化合物(NMHCs)组分及占比,并计算了各行业NMHCs的臭氧(O3)和二次有机气溶胶(SOA)生成潜势,提出了NMHCs治理建议.结果表明,涉及溶剂使用的渔具、造船、汽车制造业喷涂工序的NMHCs组分以芳香烃...     

Quantitative relationship between visibility and mass concentration of PM2.5 in Beijing

The pollution of particulate matter less than 2.5μm （PM2.5） is a serious environmental problem in Beijing. The annual average concentration of PM2.5 in 2001 from seasonal monitor results was more than 6 times that of the U,S, national ambient air quality standards proposed by U.S. EPA. The major contributors to mass of PM2.5 were organics, crustal elements and sulfate. The chemical composition of PM2.5 varied largely with season, but was similar at different monitor stations in the same season. The fine particles （PM2.5） cause atmospheric visibility deterioration through light extinction, The mass concentrations of PM2.5 were anti-correlated to the visibility, the best fits between atmospheric visibility and the mass concentrations of PM2.5 were somehow different： power in spring, exponential in summer, logarithmic in autumn, power or exponential in winter. As in each season the meteorological parameters such as air temperature and relative humidity change from day to day, probably the reason of above correlations between PM2.5 and visibility obtained at different seasons come from the differences in chemical compositions of PM2.5.     

Characterization of products from photooxidation of toluene

Photooxidation reaction of toluene in smog chamber systems was initiated by the UV radiation of tolucne/CH5ONO/NOx mixtures. The products of the photooxidation reaction of toluene and its subsequent reactions were analyzed directly utilizing Fourier transform infrared spectrometer （FTIR）. Detailed assignments to FTIR spectrum of gas-phase products were given. The information of some important functional groups in the products, such as, carbonyl groups （C-O）, hydroxyl groups （-OH）, carboxylic acid （- COOH）, C-C bonding, N O bonding and C-H bonding （C H）, was got from this analysis. These results were compared to those analyzed by aerosol time of flight mass spectrometer （ATOFMS）. It was found that there are some differcnccs between FTIR analysis of gas-phase products and that of particle-phase, for example, the products with carbonyl groups, which were connected to unsaturated chemical bonds, was relatively higher in the gas phase, while kctoncs, aldehydes, carboxylic acid and organonitrates were the dominant functional groups in the aerosol-phase reaction products. The possible reaction pathways of some important products in the gas phase were also discussed.     

运用CFD技术进行二段往复炉排焚烧炉二次风口的辅助设计

二次风口的合理布设是实现炉膛内气体混合均匀、反应完全的有效措施之一,运用CFD技术进行二段往复炉排焚烧炉二次风口的辅助设计,借助PHOENICS软件模拟二次风口对炉内流场的影响.通过模拟发现,二次风口的布设可明显提高烟气的湍流程度,前后墙各设一排直径为0.04 m的二次风口可以实现最佳的炉膛流场工况.