安钢高炉出铁场除尘工程实践

六号高炉炉前出铁场工程是一项工业污染治理项目，该项目结合安钢实际，利用较少的投资，解决了多年困扰炼铁厂的炉前烟尘污染的问题，该技术结合目前国内中小高炉出铁场综合治理的经验，提出了顶吸加侧吸的综合捕集方式，极大地改善了出铁场的烟尘污染状况，同时回收的粉尘又有极高的利用价值，取得了一定的经济效益。     

Numerical Simulation of Synoptic Condition on a Severe Sand Dust Storm

By using observational data and MM5, an observational analysisand numerical study was conducted on the synoptic condition of a severe dust storm that was caused by a Mongolian cyclone whichoccurred from 6 to 8 April 2001. Results illustrated thatthe cyclogenesis was due to the isentropic potential vorticity (IPV) advection in the upper troposphere and the terrain modifiedbaroclinicity in the mid-lower troposphere. The Altai-Sayan complex of mountains blocked the lower level cold air and made the isentropic surface sharply steep. When the air slid down along the isentropic surface the increasing of baroclinicity anddecreasing of stability blew up the vertical vorticity development.The formation of the dust storm was a result of a cyclonic cold front passing across the area. The occurrence of this dust stormwas closely related to the strong surface wind, which was accompanied by a cold front passing, rather than the cyclogenesis, itself. Hence, the reason for the pre-front dust storm formulation was the formation of heating convection. Reasons behind the formation of a black storm (visibilitylower than 50 m), which occurred in the mid-north part ofInner Mongolia, lay in several aspects. Firstly, in thisarea the surface wind was strong, a direct result of thedownward transport in mid-lower troposphere. Secondly,the cold front passed over the effected area near sunsetso the air obtained much more surface heating to form adeeper mixed layer (ML). Thirdly, cooperation between thelower level wind and the terrain made the atmosphere inthis area and acquired the maximum advective contributionnecessary to form a deep post-front ML. The sensitivityexperiment revealed that surface heat flux was important to the frontal lifting. In addition, the forcing of surface heating wasalso seen as the primary forcing mechanism of frontogenesis. Meanwhile, removal of the surface heat flux made the atmosphericstratification became stable and the pre-storm ML very shallow,which weakened the strength of the dust storm.     

矿山呼吸性粉尘危害程度评价法研究

矿山呼吸性粉尘危害程度评价法研究侯祺棕（武汉工业大学资源与环境工程系）［摘要］通过对矿山呼吸性粉尘实际危害程度评价法的研究，并经实例检验，推荐两种具有可操作性和足够准确的评价法，这对矿山呼吸性粉尘监测新技术的推广具有重要意义。［关键词］呼吸性粉尘，危...     

布袋式除尘在大型煤炭筛分系统中的成功应用

煤炭筛分系统在工作时产生的大量煤尘对环境造成污染，为解决这一问题，我们设计安装了两套煤炭筛分除尘系统，通过布袋式除尘器，把煤尘用布袋收集起来，解决了煤炭粉尘污染问题，通过三年的使用观察，效果非常明显。     

半敞开烟气排放的测试方法的研究

综合分析了除尘系统进入的烟尘量、排放方式、排放浓度等5个参数及其相互关系,根据在一定时间内进入除尘系统烟气烟尘的量;对除尘器进口和出口即百叶窗内各方向烟尘浓度的测试,利用物料平衡方程,确定百叶窗内各测点各方向测定的烟气烟尘浓度,确定半敞开排放烟气烟尘的排放浓度,笔者发现,外排烟尘浓度与百叶窗内侧向烟尘浓度具有良好的线性关系,百叶窗内侧向测定烟尘浓度能够反映半敞开烟气排放浓度。据此,提出以半敞开方式排放烟气烟尘的除尘系统烟气烟尘浓度测试方法,即侧向间接测试法。     

抽出式通风煤巷掘进过程中粉尘浓度分布规律的数值模拟

根据气固两相流理论，针对矿井掘进工作面的特点，采用计算流体力学的离散相模型（DPM）对掘进工作面通风过程中粉尘浓度进行数值模拟，总结抽出式通风掘进巷道中粉尘浓度的沿程分布及变化规律。     

管帏冲击式除尘器的应用

介绍了管帏冲击式除尘器的结构及其捕尘机理。介绍了对该除尘器进行除尘和防淋雨性能测试的实验方法和装置。分析了实验数据，得出了相应的结论。     

野生植物南山王次生化合物的生物活性研究

研究了野生植物南山王次生代谢产物的抽提技术以及其对菜青虫、小菜蛾的生物活性。试验证明:南山王的根和茎叶浸提率以甲醇最高,分别为35 2%和8 0%;其不同部位、不同极性溶剂的抽提物具有相似的生物活性;以0 01gDW/ml浓度处理供试对象的非选择性拒食率达到85 9%～93 9%,触杀作用的光活化比达到25 5～30.4。     

改进型石灰混凝法去除城市污水二级出水中有机物的研究

将石灰混凝处理后的沉淀泥渣进行回流，对石灰混凝法进行改进，研究改进后的石灰混凝法对城市污水二级出水中有机物的去除效果。结果表明，活性泥渣回流有利于提高石灰混凝法对城市污水二级出水中有机物的去除。回流位置在石灰投加前、复合絮凝剂投加后，最佳回流量为新泥渣产生量的100％～200％，活性泥渣回流的最佳pH为11．0～11．5；活性泥渣中CaCO3、Mg(OH)2、Fe(OH)3等沉淀物以及有机高分子絮体均有助于提高其对有机物的去除效果，其中Mg(OH)2沉淀物起主导作用；含循环泥渣的活性污泥回流，对有机物的去除效果无明显影响。     

长袋低压脉冲除尘器的创新与发展

依靠科技进步，应用多项专利技术，研制与开发的LFDM型长袋低压脉冲除尘器，成功应用于冶金、有色、建材、电力、机械和矿业等行业的工业气体除尘与净化；具有明显的达标排放和占地小、阻力低、投资省、运行费用少等特点。