Selection of cost-effective magnesium sources for fluidized struvite crystallization

Struvite crystallization has been considered a promising approach to recover phosphorus from wastewater. However, its practical application is limited, probably because of the high cost of magnesium(Mg). In this study, a comprehensive economic analysis was conducted using five Mg sources(MgCl_2, MgSO_4, MgO, Mg(OH)_2, and bittern) during the operation of a pilot-scale fluidized bed reactor(FBR), using swine wastewater as the case matrix. First, the economic operating conditions were investigated, and subsequently, the performance and the costs of the five Mg sources were compared. The results indicated that the FBR could be operated most economically at pH of 8.5 and Mg to phosphorus(Mg/P) molar ratio of 1.5. Under these conditions, no significant differences in phosphorus removal and product quality could be found between the five Mg sources. Selecting the most economical Mg source was thus highly dependent on the prices of the reagents and Mg sources. Low-solubility Mg sources were preferable when NaOH was priced higher, while high-solubility Mg sources proved more economical when HNO_3 was expensive. The bittern was the most economical choice only when the distances for total inorganic orthophosphate removal and struvite recovery were shorter than 40 and 270 km, respectively. The current study provides an overview of the economic selection of an Mg source, which can help reduce the cost of struvite crystallization.     

含能材料反应釜温度模型仿真辨识

目的验证一种基于遗忘因子最小二乘法(FFRLS)的含能材料反应釜温度预测模型辨识方法的正确性和有效性。方法首先利用基于机理建模方法对系统模型进行分段处理,并得到其具体结构,然后结合历史数据,利用FFRLS对系统模型参数进行辨识,最后得到含能材料反应釜温度仿真模型。结果在Matlab仿真平台上对该方法的正确性和有效性进行验证,模型参数慢时变状态下该方法辨识参数的模型参数均方根误差(RMSE)皆小于10%,模型参数突变状态下,参数RMSE最小为5.89%,最大为18.69%。结论该方法能准确、有效地对含能材料反应釜温度模型进行辨识。     

厌氧浮动生物膜反应器处理高浓度有机废水

本文探讨了厌氧浮动生物膜反应器、处理高浓度有机废水的研究。试验结果表明，在温度２０℃￣２８℃，容积负荷为５．３８￣２０．６２ｋｇＣＯＤ／ｍ＾３·ｄ，水力停留时间２３．４ｈ，ＣＯＤ去除率在９０％以上，反应器内污泥持留量高，抗冲击负荷能力强。微生物既有附着生长系统，也有大量悬浮颗粒污泥，生物膜中与颗粒污泥中的生物相有明显差异。     

扑草净降解菌降解特性、降解基因保守序列的扩增及同源性分析

从受污染农田中分离到一株补草净降解菌FR，经鉴定属于假单胞菌，考察了温度及pH对其降解能力的影响，确定pH7.0,32℃为最适作用条件；设计引物，通过PCR扩增到一条长度约为500bp的降解基因保守片段，通过对该片段部分序列测定及同源性搜索，证实该片段与atzA,triA等均三嗪化合物水解酶基因具有很高的同源性。     

Analysis of bumblebee visitation sequences within single bouts: implication of the overstrike effect on short-term memory

Pollinators whose foraging habitats consist of several plant types (species or morph) may continue to choose the plant type last visited because information about the type of plant last visited dominates over all other memory contents, in particular of short-term memory. In this study, I extracted this overstrike effect on the plant choices of pollinators by analyzing patterns of visitation sequences within a single round-trip between the hive and foraging patch (bout). First, I simulated the visitation sequences within single bouts with a model to show how factors, including the bees plant-type preferences, the arrangement of plants and the effect of overstrike on short-term memory, affect visitation sequences. Here, bees are assumed to forage in a patch consisting of two plant types (H and L). The model predicts that only the effect of overstrike on short-term memory causes assorted visitation sequences according to plant type (within-bout flower constancy). That is, if the overstrike-effect on short-term memory is the primary determinant of plant choice, then bees will fly to a type-L plant after visiting a type-L plant even if they predominantly visit type-H plants and vice versa. Next, I investigated individual bumblebees visitation sequences at a patch of artificial inflorescences with a set-up similar to that assumed in the model. Two types of inflorescences were arranged on a Cartesian grid. Assorted visitation sequences according to inflorescence type were observed, depending on the distances among inflorescences. This result supports the hypotheses that bees fly to the same plant type as that last visited because short-term memory is displaced (overstruck) with information about the most recently visited plant type.Communicated by M. Giurfa     

高浓度褐藻酸钠生产废水处理工程设计

利用以EGSB反应器为主体的生物法与混凝工艺相结合处理高浓度褐藻酸钠生产废水，处理水质可达到国家污水综合排放二级标准。工程实践表明该工艺具有投资与占地面积少，运行效果稳定，可回收能源等优点。     

折流式水解反应器处理印染废水温影响研究

在水温为5℃、9．7℃、14．9℃、19．7℃、23．5℃和31．1℃6种温度的条件下，应用折流式水解反应器对印染废水进行水解试验研究。结果表明，提高水温可增大COD、色度及UVA254的去除效率，相应的ORP值变小，pH值升高，水解程度加深。水温5℃时，水解效果较差；水温在10—23．5℃内，水解效果相对较好，31．1℃水解效果最好，研究结果能为工程应用提供一定的参考。     

流动床生物膜反应器在污水处理中的应用研究现状

给出了流动床生物膜反应器的定义、分类及其特点 ,并对各种流动床生物膜反应器的优缺点及近年来在污水处理中的应用状况进行了总结 ,根据实际应用效果 ,提出了各类反应器的适用处理对象     

鼓泡塔中有机酸强化粗颗粒石灰石新型烟气脱硫

对传统石灰石湿法烟气脱硫进行了改进,提出了一种新型烟气脱硫方法,即在鼓泡塔中添加有机酸,采用大颗粒石灰石(210 μm)代替传统的细颗粒石灰石(5～20 μm)进行脱硫.实验在鼓泡搅拌吸收反应器中对比研究了新老两种脱硫工艺.结果表明,当210 μm石灰石浆液中醋酸摩尔浓度达10～30 mmol/L,其脱硫率和石灰石利用率分别为95%和93.5%,均达到甚至优于传统石灰石脱硫结果.实验研究了影响脱硫率的各种因素:添加醋酸浓度、入口SO2浓度、石灰石浆液浓度、气体停留时间以及温度等,并提出添加醋酸促进SO2吸收的机理.运用该新型烟气脱硫方法,可降低电厂的基础投资和运行费用,大大加强系统的稳定性和抗击烟气中SO2波动的能力.     

IC反应器厌氧氨氧化启动与运行特性研究

采用一套有效容积为20 L的IC反应器,接种啤酒废水厌氧处理池污泥,保持反应器进水NH+4-N浓度为120 mg/L,NO-2-N浓度为150 mg/L,在温度为30±1 ℃的条件下,对ANAMMOX反应过程的启动和运行特性进行了研究.结果表明反应器的启动经历了污泥低负荷驯化期、负荷提高期和高负荷运行期3个阶段;在反应器运行到第130 d,反应器启动成功;NH+4-N和NO-2-N的去除率分别约82.1%和94.5%;去除的NH+4-N和NO-2-N及生成的NO-3-N三者之间的比值为11.160.3;在反应器中形成了粒径为1～2 mm的颗粒污泥.