北京市区公路旁尘土中铂族元素的化学形态

用ICP-MS 法检测北京市区公路旁尘土中铂、铑和钯各种形态的含量及总含量.结果表明,北京市区采样点公路旁土壤中铂,铑和钯的总量分别为154.23 ng·g-1,62.77 ng·g-1和 77.97 ng·g-1,其中非残留态的百分比含量为铑(37.82%) ＞钯(27.45%) ＞铂(26.87%);在自然条件作用下可进入地下水和可被植物吸收部分的百分比为铑(29.14%)＞钯(23.87%)＞＞铂(7.92%).     

塿土中可给态镍浸提方法的研究

在前人工作的基础上,应用主成分分析、逐步回归分析和通径分析的方法,提出了(土娄)土中可给态镍的浸提方法及影响可给态镍的土壤性质.结果表明,DTPA浸提法可作为(土娄)土中可给态镍的浸提方法,铁锰氧化物结合态镍是(土娄)土可给镍的主要来源.碳酸盐结合态镍和有机质结合态镍是(土娄)土可给镍的潜在来源.它们在调控可给态镍的储量上起着重要作用.影响(土娄)土可给态镍最重要的土壤性质是pH和E_h_7.     

一种高效测试污泥可生物降解性的实验方法研究

污泥的可生物降解性能由其有机组分的生物可及度和组分分子的复杂度共同决定。通过采用化学分级提取方法研究污泥组分的生物可及度,使用不同强度的提取溶液分离出4种化学可及度不同的提取组分,同时结合三维荧光光谱法对各组分中有机物质的复杂度进行分析。分析结果表明:组分的化学可及度与其生物可及度之间存在正相关关系;生物可及度较高,其成分有机物分子结构简单的组分SPOM(soluble particulate organic matter,SPOM)与REOM(readily extractible organic matter,REOM)在厌氧消化过程中降解率较高,分别为59.2%与46.3%的COD;而生物可及度低,组成复杂的组分SEOM(slowly extractible organic matter,SEOM)与PEOM(poorly extractible organic matter,PEOM)的生物降解率分别只有18.4%和5.8%的COD。     

南京市城市污泥和工业污泥中典型矿质元素含量和形态分布研究

采用三态连续提取法研究南京市部分城市污泥和工业污泥中典型矿质元素的含量和形态分布,为污泥资源化的合理利用提供科学参考.结果表明,污泥总体呈高有机质、高氮磷、低K的相似性,但其理化性质如阳离子交换容量(CEC)、pH等有差异.污泥中不同矿质元素含量差异也较大,Fe的浓度最高,其次是Mg、Zn;且不同污泥间同一矿质元素含量的差异也较大.各元素的形态分布有一定差异,Cu主要分布在可氧化态,其酸溶/交换态和可还原态的百分率很低;Zn三态分布均较高;Mg、Mn主要分布在酸溶/交换态;Fe主要分布在残渣态.但三种提取形态百分率之和除Fe外均超过50%.研究同时表明,城市污泥和工业污泥中矿质元素形态分布无显著性差异.     

SEQUENTIAL GENERATION OF STREAMFLOW1

ABSTRACT: An auto-regressive model has been developed for hydrologic data simulation. The model is computationally easier, parsimonious in number of model parameters and more stable in statistical characteristics than the existing auto-regressive model. The proposed model was used for synthesizing 10 sequences, each of 100 year length, of monthly flows for the river Beas. The statistical parameters were calculated using 49-year historical record for the river. The data was also synthesized using existing auot-regressive model. The synthesized sequences have been compared. The results indicate that the proposed model is as good as the existing auto-regressive model in preserving the mean and standard deviation of historical record. It is further shown that the proposed model requires less parameters than the auto-regressive model for simulation of long-term dependence.     

Levels and speciation of heavy metals in soils of industrial Southern Nigeria

A knowledge of the total content of trace metals is not enoughto fully assess the environmental impact of polluted soils. Forthis reason, the determination of metal species in solution isimportant to evaluate their behaviour in the environment andtheir mobilization capacity. Sequential extraction procedure wasused to speciate five heavy metals (Cd, Pb, Cu, Ni and Zn) fromfour contaminated soils of Southern Nigeria into sixoperationally defined geochemical species: water soluble,enchangeable, carbonates, Fe-Mn oxide, organic and residual.Metal recoveries were within ± 10% of the independentlydetermined total Cd, Pb, Cu, Ni and Zn concentrations. The highest amount of Cd (avg. 30%) in the nonresidual fractionswas found in the exchangeable fraction, while Cu and Zn weresignificantly associated with the organic fraction. Thecarbonate fraction contained on average 14, 18.6, 12.6, 13 and11% and the residual fraction contained on average 47, 18, 33,50 and 25% of Cd, Pb, Cu, Ni and Zn respectively. Assuming thatmobility and bioavailability of these metals are related to thesolubility of the geochemical form of the metals, and that theydecrease in the order of extraction sequence, the apparentmobility and potential bioavailability for these five metals inthe soil were: Pb > Zn > Cu > Ni > Cd. The mobility indexes ofcopper and nickel correlated positively and significantly withthe total content of metals, while mobility indexes of cadmiumand zinc correlated negatively and significantly with the totalcontent of metals.     

Characteristics of aerobic granules grown on glucose a sequential batch shaking reactor

Aerobic heterotrophic granular sludge was cultivated in a sequencing batch shaking reactor(SBSR) in which a synthetic wastewater containing glucose as carbon source was fed. The characteristics of the aerobic granules were investigated. Compared with the conventional activated sludge flocs, the aerobic granules exhibit excellent physical characteristics in terms of settleability, size, shape, biomass density, and physical strength.Scanning electron micrographs revealed that in mature granules little filamentous bacteria could be found, rod-shaded and coccoid bacteria were the dominant microorqanisms.     

突发性环境污染事故风险管理进展

在介绍突发性环境污染事故的概念、类型与特性的基础上,综述了近年来国内外风险管理的进展。要对突发性环境污染事故进行风险管理,需要有组织的风险管理体系和风险管理计划。风险管理计划应当包括危害的风险评价、预防和应急反应三部分内容。文中详细阐述了突发性环境污染事故的预防、应急处理与对策、善后处理与影响评价的主要内容和方法。     

序贯高斯法模拟新沂、东海农业区土壤砷空间变异性

采用序贯高斯条件模拟值法,研究了江苏省新沂、东海农业区土壤砷含量空间变异性.结果表明,研究区土壤砷为正偏态分布,经高斯非线性转化后,符合二阶平稳假设.其经验半变异函数表现为各向同性.采用加权多项式法,对经验半变异函数拟合结果进行评价,并根据结果选择了带块金效应的高斯模型作为拟合模型.对研究区砷分布情况进行了100次模拟,模拟结果平稳.根据模拟数据与实际监测数据的关系,采用相关系数法选择最终模拟结果.研究区西北部土壤砷含量最高,中北部最低.     

Accident modelling and analysis in process industries

Accident modelling is a methodology used to relate the causes and effects of events that lead to accidents. This modelling effectively seeks to answer two main questions: (i) Why does an accident occur, and (ii) How does it occur. This paper presents a review of accident models that have been developed for the chemical process industry with in-depth analyses of a class of models known as dynamic sequential accident models (DSAMs). DSAMs are sequential models with a systematic procedure to utilise precursor data to estimate the posterior risk profile quantitatively. DSAM also offers updates on the failure probabilities of accident barriers and the prediction of future end states. Following a close scrutiny of these methodologies, several limitations are noted and discussed, and based on these insights, future work is suggested to enhance and improve this category of models further.