刁江底泥砷形态的化学分级法与XANES方法比较

采用XANES(X射线近边分析)方法和化学分级法,研究了刁江污染源区尾砂及刁江底泥的砷形态组成特征. XANES方法结果表明,尾砂中砷的形态主要以毒砂(FeAsS)存在,其相对百分含量为63%~99%;而刁江底泥中的砷形态主要是毒砂、砷酸盐和亚砷酸盐,其中毒砂的比例较高,表现出典型的尾砂污染特征. 化学分级法结果表明,尾砂中砷形态主要是残渣态砷(Res-As),而底泥中的砷主要以铁合态、钙合态及残渣态形式存在. 刁江底泥中毒砂相对百分含量和残渣态砷随着与污染源区距离的增大而减小,砷酸盐和亚砷酸盐则呈相反的趋势. 化学分级法和XANES方法所反映的刁江底泥和污染源的砷形态组成和变化趋势总体上较为一致,但这2种方法所获得的定量数据存在一定的差异.      

Eco-friendly approach for leaching out heavy metals from sewage sludge

Sewage sludge contains rich organic matter and nutrients essential for the growth of plants but the presence of toxic heavy metals restricts its land application. To overcome this, the study aims an eco-friendly approach for leaching out heavy metals. Sewage sludge from sewage treatment plant, Chennai, India was characterised. The analysis of total heavy metal concentration was done by digesting in nitric acid and different forms were extracted by community bureau of reference sequential method. Heavy metals: As, Cd, Cr, Cr, Ni, Pb and Zn were determined using inductively coupled plasma optical emission spectrometry Perkin Elmer Optima 5300 DV. The experimental set-up for heavy metal leaching was held for five consecutive days at different concentrations of humic acid (0.1%, 0.5% and 1%) at varied pH (5–9). Results revealed that at the end of fifth day at pH 8, 1% humic acid is capable of leaching out 75.5% cadmium, 66.0% nickel, 52.0% lead, 51.2% zinc, 31.2% copper and 8.5% cadmium from sewage sludge. Statistically positive correlation (0.7088) existed between the percentage of heavy metals leached out and the sum of soluble and reducible fractions. Thus, from ecological point of view, humic acid can be used to leach out heavy metals from sewage sludge serving the need in restoration of soil fertility upon land application.     

顺序注射阻抑动力学光度法测定环境水样中的对苯二酚

在酸性条件下,利用对苯二酚能够阻抑碱性藏花红和溴酸钾反应的原理,联用顺序注射分析技术建立了快速测定环境水样中对苯二酚的新方法。在最佳实验条件下,对苯二酚的线性范围为0.05~1.50μg·m L~(-1),检出限为0.02μg·m L~(-1),完成一次分析循环总的试剂消耗仅为0.125 m L。该方法用于自来水、地表水和河水中对苯二酚的测定,结果与HPLC法所得结果对照,无显著性差异。     

Utilization of aluminum hydroxide waste generated in fluoride adsorption and coagulation processes for adsorptive removal of cadmium ion

Although Al-based coagulation and adsorption processes have been proved highly efficient for fluoride (F) removal, the two processes both generate large amount of Al(OH)₃ solid waste containing F (Al(OH)₃-F). This study aimed to investigate the feasibility of utilizing Al(OH)₃-F generated in Al(OH)₃ adsorption (Al(OH)₃-F_ads) and coagulation (Al(OH)₃-F_coag) for the adsorption of cadmium ion (Cd(II)). The adsorption capacity of Al(OH)₃-F_ads and Al(OH)₃-F_coag for Cd(II) was similar as that of pristine aluminum hydroxide (Al(OH)₃), being of 24.39 and 19.90 mg·g^–1, respectively. The adsorption of Cd(II) onto Al(OH)₃-F_ads and Al(OH)₃-F_coag was identified to be dominated by ion-exchange with sodium ion (Na⁺) or hydrogen ion (H⁺), surface microprecitation, and electrostatic attraction. The maximum concentration of the leached fluoride from Al(OH)₃-F_ads and Al(OH)₃-F_coag is below the Chinese Class-I IndustrialWastewater Discharge Standard for fluoride (<10 mg·L^–1). This study demonstrates that the Al(OH)₃ solid wastes generated in fluoride removal process could be potentially utilized as a adsorbent for Cd(II) removal.     

Speciation of particulate trace metals in sediments of Anarbe reservoir∗

Total concentration and chemical forms of heavy metals in samples of sediment from a drinking water reservoir have been analysed. The result of total metal contest shows Fe and Mn concentration increase along the reservoir, from 4.4% in Fe and 0.07% in Mn in the end part to 6.4% Fe and 0.22% Mn at the dam. However, a decrease in organic matter along the reservoir is observed. In order to test the accuracy of the digestion methods used, a standard reference material was also analysed.

Trace metal concentrations, with exception of Cadmium, Pb and Mn, found in fraction 5 are higher than those observed in the others extractions, Fe, Ni, Zn, Cr and Cu content in non‐residual fraction is found mainly in moderately reducible fraction, but the percentage of this fraction in each metal is very different.     

Speciation of heavy metals in sediments from the Scheldt estuary,Belgium

A simple three-step sequential extraction procedure was applied to study the speciation of heavy metals in sediment from Scheldt estuary, and their relationship to sediment grain size and organic matter content. The sedimentary metal content was fractionated into carbonate and exchangeable, metals bound to organic matter and residual fractions. Sedimentary total metal content was also determined using an industrial microwave (ETHOS 900) HF/HNO₃ extraction method. The extracts were analysed for metals using inductively coupled plasma atomic emission spectrometry. The bioavailable fraction (exchangeable and metals bound to organic matter) comprised less than the other forms. Residue metals were the dominant form of metals in almost all studied sites. The average total metal content for the studied sites decreased in the order Fe>Cr>Cu>Co>Zn>Pb>Cd. Based on average values for the studied sites, the highest bioavailable metals in sediments were Cd (38%) from Westkapelle, Zn (17%) from Yerseke, Co (12%) from Domburg, Cr (9%) from Vlissingen, Fe and Pb each (2%) from Yerseke, and Cu (1%) from Domburg. Metal recovery was good, with<10% difference between the total metal recovered through the extractant steps and the total metal determined using HF/HNO₃ extract.     

A comparative study of three different methods for the sequential extraction of heavy metals in soil

Three different methods for the sequential extraction of heavy metals from soil (viz those of Tessier et al. (A. Tessier, P.G. Campbell and N. Bisson (1979). Anal. Chem., 51, 844.), Sposito et al. (G. Sposito, L.J. Lund and A.C. Chang (1989). Soil. Sci. Soc. Am. J., 46, 260.) and Mann and Ritchie (S.S. Mann and G.S.P. Ritchie (1993). Aust. J. Soil Res., 31, 255.)) were examined in terms of the distribution of Cu, Zn and Pb in the soil phases and the bioavailability of these elements in soil. To this end, several samples of soils polluted with metals from a copper mine were fractionated by using the three studied methods and analyzed by atomic absorption spectrometry. The results revealed differences in extraction efficiency among the methods due to the extractant used, or its concentration, and to the soil/solution ratio. The three methods were found to provide accurate heavy metal background contents. However, the method of Tessier et al. is to be preferred for quantifying increased levels of heavy metals on account of its high extraction power.     

基于范例推理的灾害性地震应急物资需求预测研究

基于范例推理(CBR)理论,利用最近相邻法和粗糙集理论搜索相似度最高的主震历史范例,分析各主要物资需求量的影响因素,预测当前范例主震期应急物资需求量。通过序贯决策,采用马尔科夫预测模型预测余震类型,进而搜索余震历史范例,预测余震期应急物资需求量。以"玉树"地震为例,运用该方法估算地震发生后食物类、生活用品类、药品类、工程机械类的需求量。     

QuickPanel在油浆过滤自动控制系统中的应用研究

阐述了油浆过滤控制系统的硬件配置、分程控制及顺序控制等．通过控制系统的控制,过滤器A、B轮流进行过滤、再生步骤,将油品内51μm以上的颗粒过滤掉,达到提高油品质量、延迟装置检维修期的目标．图1,参5．     

干法烟气脱硫副产物中汞的形态分布

通过分析干法烟气脱硫副产物中不同形态汞的含量,研究干法脱硫灰中汞的环境稳定性. 利用逐级化学提取法,分析了锅炉底灰、锅炉飞灰、脱硫塔底灰和除尘器灰中水溶态、酸溶态、过氧化氢溶态及王水溶残渣态汞的含量,研究了不同形态汞含量的变化规律. 结果表明,锅炉底灰、锅炉飞灰、脱硫塔底灰和除尘器灰中w（总汞）分别为0.23,0.36,0.46和1.22 mg/kg,且随着脱硫除尘时间的延长w（总汞）呈增加的趋势,其中,以氯化物、硝酸盐和硫酸盐存在的水溶态汞变化明显,除尘器灰中w（水溶态汞）高达0.72 mg/kg. 分析认为,干法烟气脱硫灰吸附的大部分汞蒸气转化为可溶性的氯化物、硝酸盐和硫酸盐等,另外还有少量汞以单质状态存在.