Determination of lindane leachability in soil-biosolid systems and its bioavailability in wheat plants

The leachability of lindane from different biosolid amended soils was determined and compared to its bioavailability. Sand, soil, and a mixture of soil-sand (1:1 w/w) were spiked with lindane, blended with different amounts of biosolids, and subjected to a leaching process with water that lasted for 1-28 d. This procedure is in accordance with ISO/TS 21268-1: 2007. After these batch tests, lindane was extracted from the leachates using three different solvent-free microextraction techniques, including solid phase microextraction (SPME), stir-bar sorptive extraction (SBSE), and silicone rod extraction (SRE). The amount of lindane was determined with thermal desorption and gas chromatography coupled to mass spectrometry (GC-MS). The efficiencies of the three microextraction techniques were statistically different, and the efficiency could be related to the amount of polydimethylsiloxane (PDMS) in each extraction device. However, all of the techniques provide data that shows that the leachability of lindane is dependent on the amount of organic matter contained in the matrix.The results of the lindane leachability assay were compared to the bioavailability of lindane, which was determined by measuring the amount of lindane that accumulated in the roots of wheat plants grown in similar soil-biosolid systems.It was confirmed that the amount of organic matter in the matrix is a determining factor for lindane immobilization. The presence of biosolids decreases the mobility of lindane in all of the systems under study. Similarly, increasing biosolid concentrations in the soil significantly decreased the bioavailability of lindane and, consequently, plant absorption.The good correlation (R² = 0.997) between the leachability of lindane from the matrix and plant absorption of lindane indicates that the proposed biomimetic methodology can predict the bioavailability of lindane in a time period as short as 7 d.The results of this work confirm that amending contaminated soils with biosolids is beneficial for immobilizing lindane and helps prevent the percolation of lindane through the soil profile and into groundwater.     

Influences of redox transformation, metal complexation and aggregation of fulvic acid and humic acid on Cr(VI) and As(V) removal by zero-valent iron

This study investigated the removal kinetics and mechanisms of Cr(VI) and As(V) by Fe(0) in the presence of fulvic acid (FA) and humic acid (HA) by means of batch experiments. The focus was on the involvements of FA and HA in redox reactions, metal complexation, and iron corrosion product aggregation in the removal of Cr(VI) and As(V) removal by Fe(0). Synthetic groundwater was used as the background electrolyte to simulate typical groundwater. The results showed faster Cr(VI) removal in the presence of HA compared to FA. Fluorescence spectroscopy revealed that no redox reaction occurred in the FA and HA. The results of the speciation modeling indicate that the free Fe(II) concentration was higher in the presence of HA, resulting in a higher removal rate of Cr(VI). However, the removal of As(V) was inhibited in the HA solution. Speciation modeling showed that the concentration of dissolved metal-natural organic matter (metal-NOM) complexes significantly affected the aggregation of the iron corrosion products which in turn affected the removal of As(V). The aggregation was found to be induced by gel-bridging of metal-NOM with the iron corrosion products. The effects of metal-NOM on the aggregation of the iron corrosion products were further confirmed by TEM studies. Larger sizes of iron corrosion products were formed in the FA solution compared to HA solution. This study can shed light on understanding the relationships between the properties of NOM (especially the content of metal-binding sites) and the removal of Cr(VI) and As(V) by Fe(0).     

Dynamic modelling of atmospherically-deposited Ni, Cu, Zn, Cd and Pb in Pennine catchments (northern England)

Simulation modelling with CHUM-AM was carried out to investigate the accumulation and release of atmospherically-deposited heavy metals (Ni, Cu, Zn, Cd and Pb) in six moorland catchments, five with organic-rich soils, one with calcareous brown earths, in the Pennine chain of northern England. The model considers two soil layers and a third layer of weathering mineral matter, and operates on a yearly timestep, driven by deposition scenarios covering the period 1400-2010. The principal processes controlling heavy metals are competitive solid-solution partitioning of solutes, chemical interactions in solution, and chemical weathering. Agreement between observed and simulated soil metal pools and surface water concentrations for recent years was generally satisfactory, the results confirming that most contemporary soil metal is from atmospheric pollution. Metals in catchments with organic-rich soils show some mobility, especially under more acid conditions, but the calcareous mineral soils have retained nearly all anthropogenic metal inputs. Complexation by dissolved organic matter and co-transport accounts for up to 80% of the Cu in surface waters.     

The influence of the North-Föhn on tracer organic compounds in ambient air PM10 at a pre-alpine site in Northern Italy

The ambient air in Northern Italy is characterised by relatively high PAH and PM₁₀ concentrations in relation to calm wind and intensive temperature inversions, especially during cold periods. These stagnant conditions are occasionally interrupted by North-Föhn events, which cause a drop in relative humidity and an increase in O₃ levels, indicating the mixing of local and free troposphere air flows. In this study the influence of the North-Föhn on concentrations of tracer organic compounds, including polycyclic aromatic hydrocarbons (PAHs), PM₁₀, O₃ and black carbon (BC) was studied during a North-Föhn event in November 2007. Large fluctuations in the concentration of these compounds, as well as changes in PM₁₀ composition due to daytime and night-time variations of local source emissions were observed. Although these events occur at low frequencies (6-10%) they can for short periods, strongly affect the regional air quality by quickly decreasing the concentrations of these tracer organic compounds.     

Quantifying the influence of humic acid adsorption on colloidal microsphere deposition onto iron-oxide-coated sand

This article describes an approach for quantifying microsphere deposition onto iron-oxide-coated sand under the influence of adsorbed Suwannee River Humic Acid (SRHA). The experimental technique involved a triple pulse injection of model latex microspheres (microspheres) in pulses of (1) microspheres, followed by (2) SRHA, and then (3) microspheres, into a column filled with iron-coated quartz sand as a water-saturated porous medium. A random sequential adsorption model (RSA) simulated the gradual rise in the first (microsphere) breakthrough curve (BTC). Using the same model calibration parameters a dramatic increase in concentration at the start of the second particle BTC, generated after SRHA injection, could be simulated by matching microsphere concentrations to extrapolated RSA output. RSA results and microsphere/SRHA recoveries showed that 1 μg of SRHA could block 5.90 ± 0.14 × 10⁹ microsphere deposition sites. This figure was consistent between experiments injecting different SRHA masses, despite contrasting microsphere deposition/release regimes generating the second microsphere BTC.     

A comparison of sediment deposition in two adjacent floodplains of the River Adour in southwest France

Two floodplains within the catchment of the River Adour (SW France) have been examined in order to analyse spatio-temporal variations in discharge and suspended matter flux. Both floodplain zones were found to be excellent sites for the interception of suspended sediment. The narrow riparian vegetative strips (RVS) within each zone were found to retain 92-98% of the sediment trapped within the floodplain during each of three separate flood events. The precise level of sediment deposited within the floodplain was found to be dependent on micro-topographical features and the nature of the vegetation: the wooded areas within the RVS being particularly effective at trapping sediment. Mean masses of sediment collected in the flood plains ranged from 75kgm(-2) in the RVS to 0.02kgm(-2) in the areas of the floodplain inundated by back-up flows. Using data on discharge and sediment fluxes within the catchment gathered over a period of 25 years it is possible to discern how hydroclimatic fluctuations have affected the watershed with periods of sediment retention within the floodplain zones alternating with periods of sediment export. Anthropogenic activity, involving river management, including the cutting of meanders, the construction of dykes for flood prevention and the use of water for agricultural purposes, has also had a major impact during this period, particularly in the downstream areas of the catchment.     

Biological Responses to Contrasting Hydrology in Backwaters of Upper Mississippi River Navigation Pool 25

Water level management in Mississippi River Pool 25 differentially influences off-channel habitats in the mid-pool and lower pool. Hydrologic models indicate lower pool off-channel habitats dry with greater frequency and duration compared to similar habitats at mid-pool. We examined the influence of this contrasting hydrology on substrate characteristics, organic matter, macroinvertebrate, and fish communities in off-channel habitats during 2001–2003. Benthic organic matter standing stocks were stable in mid-pool habitats but lower pool values were variable because of annual differences in moist-soil vegetation production. Generally, small-bodied and multivoltine invertebrate taxa had high community biomass and dominated lower pool habitats, whereas longer-lived and large-bodied taxa were more abundant and had higher community biomass in mid-pool habitats having longer hydroperiods. Fish communities were dominated by cyprinids in both habitats, and mid-pool habitats tended to be higher in overall species richness. Unique fish taxa were collected in each pool, with primarily rheophilic forms in mid-pool habitats and limnophilic forms in lower pool habitats. Results indicate that contrasting hydrology associated with a mid-pool control point directly and indirectly influences biological communities in off-channel habitats. Further, management regimes that promote hydrologic diversity in off-channel habitats may enhance biological diversity at larger spatial and temporal scales.     

Studying soil organic matter using 13C CP-MAS NMR: the effect of soil chemical pre-treatments on spectra quality and representativity

¹³C CP-MAS NMR spectroscopy is a technique that has proved to be useful in studying soil organic matter (SOM). Nevertheless, NMR spectra exhibit a weak signal and have very low resolution due to: the low natural abundance of ¹³C (1.1 % of C) in SOM, the generally low SOM content of soils, and the presence of paramagnetic impurities. This paper studies the effects of soil chemical pre-treatments on ¹³CP-MAS NMR spectra quality and spectra representativity i.e. soil C mass balance.

After chemical pre-treatment to increase total organic carbon (TOC) content and C/Fe ratio, eight soils characterized by different levels of organic carbon content and C/Fe ratios were studied using ¹³CP-MAS NMR. Moreover, where chemical treatments were not applicable due to high carbon losses, the number of ¹³CP-MAS NMR scans was increased in order to obtain satisfactory spectra.

Results show that chemical pre-treatment of soils with C/Fe > 1 caused high C losses. Bulk soils were therefore studied by increasing the number of ¹³CP-MAS NMR scans. Acceptable spectra were obtained from 8K scans (1K = 1024 transient). On the other hand, even when a large number of scan (32K) are used, soil with C/Fe < 1 cannot be studied. As these soils are characterized by low C losses after HCl treatments (range of 2.9–25.4%), a pre-treatment of at least 1.39 mol l⁻¹ HCl removes excess Fe and at the same time increases C/Fe ratio resulting in 32K scans providing good spectra.     

Particle concentrations in data centers

Cooling buildings with large airflow rates of outside air when temperatures are favorable is an established energy-saving measure. In data centers, this strategy is not widely used, owing to concerns that it would cause increased indoor levels of particles of outdoor origin, which could damage electronic equipment. However, environmental conditions typical of data centers and the associated potential for equipment failure are not well characterized. This study presents the first published measurements of particle concentrations in operating data centers. Indoor and outdoor particle measurements were taken at eight different sites in northern California for particulate matter 0.3–5.0 μm in diameter. One of the data centers has an energy-efficient design that employs outside air for cooling, while the rest use conventional cooling methods. Ratios of measured particle concentrations in the conventional data centers to the corresponding outside concentrations were significantly lower than those typically found in office or residential buildings. Estimates using a material-balance model match well with empirical results, indicating that the dominant particle sources and losses have been identified. Measurements taken at the more energy-efficient site show nearly an order of magnitude increase in particle concentration when ventilation rates were high. The model indicates that this increase may be even higher when including particles smaller than the monitoring-equipment size limitation. Even with the increases, the measured particle concentrations are still below concentration limits recommended in industry standards.     

桐庐县富春江、分水江库区漂浮物打捞处置方案

桐庐县富春江、分水江库区漂浮物主要由水葫芦、生活垃圾、动物尸体三部分构成,结合桐庐县垃圾处理处置设施建设现状及规划,对水葫芦及生活垃圾采用机械打捞-压缩中转-烘干（仅水葫芦）-焚烧工艺,对动物尸体采用人工打捞-冷藏车运输-冷库储存-焚烧工艺。为确保水葫芦焚烧可行性,比较了烟气直接烘干和蒸汽间接烘干两种工艺,推荐采用蒸汽间接烘干。