阴离子型聚丙烯酰胺相对分子质量和水解度对污泥脱水性能影响的研究

通过对污泥絮凝颗粒粒径分布、污泥比阻、泥饼含固率、上清液体积及其中核酸、蛋白质和总糖浓度的测定,研究了不同剂型和剂量阴离子型聚丙烯酰胺（PAM）对城市污泥沉降性能和脱水性能的影响及机制.结果表明,当PAM相对分子质量相同时,提高水解度能改善污泥的沉降和脱水性能;当PAM水解度相同时,提高相对分子质量亦可改善其沉降和脱水...     

基于LCA的钢铁联合企业CO_2排放影响因素分析

钢铁企业是CO2排放大户,减少吨钢CO2排放是钢铁企业节约能源、保护环境、走可持续发展道路的必然要求.本研究旨在对钢铁企业产品生命周期清单研究的基础上,识别钢铁企业CO2排放的主要影响因素,提出针对性的减排建议.以某钢铁联合企业的产品生命周期清单模型为平台,同时利用TornadoChart工具,计算得到对企业CO2排放影响较大的因素,然后提出了相应的减排措施.结果表明,转炉流程对于钢铁企业的影响要大于电炉流程;对该企业CO2排放有重大影响和相关影响的因素有:高炉煤气(BFG)的CO2排放系数、连铸坯的钢水单耗、热轧的板坯单耗、转炉的铁水比.减少钢铁联合企业CO2排放的有效措施是采取捕集BFG中的CO2、降低转炉的铁水比、加强副产煤气的回收以及优化企业的产品生产结构.     

恒液位推流式改良SBR工艺处理生活污水

通过对恒液位推流式改良SBR工艺处理生活污水工程应用的研究,结果表明:恒液位推流式改良SBR工艺在降低工程成本和减少设备量的同时能较好的去除污水中的污染物,具有良好的脱氮除磷效果,COD去除率可达85%~93%;TP的去除率可达84%;TN的去除率可达82%。     

复合垂直流人工湿地的脱氮机理及影响因素分析

采用沸石和砾石作为填料,研究复合垂直流人工湿地处理农村生活污水的脱氮机理。试验结果表明:复合垂直流人工湿地对污水中氮的去除主要发生在下行流填料柱中,其去除机理主要是微生物对溶解态氮的硝化和反硝化作用;悬浮态氮沉积在填料孔隙中,会出现"氮释放"现象;水温、气水比、碳氮比、氮源形式等因素对湿地系统的脱氮效率有显著影响。     

基于微波辐射研究城市污水污泥脱水特性

选用沈阳市仙女河污水处理厂和北部污水处理厂污水污泥作为微波脱水试验物料,分析物料性质、辐射强度、辐射时间以及添加剂投入量等对污泥脱水率和有机质损失率的影响. 结果表明:污泥中水分含量高的脱水效果最好,经过微波处理后的污泥有机质含量仍较高;辐射时间是最主要的影响因素,在540 W下辐射2～5 min即可达到良好效果;在合适的辐射时间下540～900 W都能达到良好的脱水效果,但在900 W时有机质的损失率较大,达到65.64%;添加剂投入量对污泥脱水基本不起作用,但可改变污泥微波干燥后的性状. 同时,运用灰色关联分析得到决定微波试验运行系统的主次因素,最后建立了影响因素对污泥脱水率和有机质损失率的经验公式.      

气浮法对矿区洗浴污水中洗涤剂处理及回用研究

通过不同方案的对比试验,确定了矿区洗浴污水处理及回用的工艺,重点解决了阴离子合成洗涤剂对水质的影响,为矿区洗浴污水回用提供一项可行的方案。     

城市污水预水解对二级生化处理的影响

为考察预水解对后续二级生化处理的影响,结合无锡市城北污水处理厂实际运行情况进行了生产性试验研究。结果表明,对于工业废水占40%的城市污水而言,原水经过水解预处理后的可生化性得到提高,并且由于水解池在未满负荷运行的情况下对碳源有机物的去除率较高,对后续硝化脱氨、反硝化脱氮和除磷存在不同的影响。     

一体化膜生物反应器处理低C/N污水试验研究

研究一体化连续流间歇曝气膜生物反应器(IMBR)处理低C/N城市污水的工艺效能。试验结果表明:反应器在曝气2 h、搅拌2 h的运行模式下,对COD、NH4+-N、TN和SS的平均去除率分别达到了87%,83.4%,75.4%和97.81%,各出水质量浓度平均值分别为17.5,4.59,7.63和2 mg/L,出水水质达到了GB/T18920-2002《城市污水再生利用城市杂用水水质》标准。     

污水资源化是缓解水资源危机的一条重要途径

通过阐述当今水资源短缺的情况,例举了国外和国内污水资源化（污水再生利用）的一些示范工程和应用工程,以此来说明污水资源化在我国是一项利国、利民,利于解决资源短缺、保护环境的有效措施。     

The regional economic impact of reducing greenhouse gas emissions: Western Australia

This study analyses the general-equilibrium impacts of an international climate change response policy on the economy of Western Australia (WA), one of the most mining-based and energy-intensive states of Australia. It finds that emissions would fall by up to 11% from the base level in WA. However, such environmental benefits emanate at some costs to the state economy; in terms of foregone gross state product, the costs are up to 3% of the base level. Indeed, the actual costs and benefits depend on the precise design of the climate change response policy as well as on the other policies within which it operates. For example, when emission quota permits are sold to industries and no tradeable carbon credits (i.e. credits for the carbon sequestrated in Kyoto forests) are granted, emissions decline by about 8% and GSP falls by about 3% of the base levels. If carbon credits are tradeable, however, the environmental benefits could be increased and the GSP cost could be reduced substantially. Also, the reduced economic activity caused by emission abatement results in a modest fall in net government revenue, despite the additional revenue from permit sales in some cases. Accordingly, government’s fiscal package surrounding the emission permits would influence the emission abatement impacts on the economy. With regard to the effects on the structure of the state economy, the oil and gas industry suffers only a slight contraction but the energy-supplying sector as a whole contracts substantially. It is therefore not surprising that the impacts on the WA economy of curbing emissions by energy and transport industries alone are quite significant when compared to those resulted from all industries’ compliance with the abatement scheme. It needs to be noted that the model projections analysed in the paper are based on simplifying assumptions and tentative scenarios, and hence should be viewed with caution and not be understood as unconditional forecasts.