铁床／二氧化氯组合工艺处理蒽醌类染料废水

针对某染料厂蒽醌染料生产过程中排放的废水，具有COD、色度、酸度均较高的特点，采用铁床／二氧化氯组合工艺处理，废水水质得到了较好的处理，达到了当地污水处理厂的接管标准。     

医院污水处理的消毒剂及消毒工艺

综合比较目前国内常用的医院污水消毒处理方法，介绍消毒剂的种类和有效氯含量，论述各种消毒工艺的优缺点。     

遥感监测在汽车排气检测中的应用

介绍了激光遥感监测的工作原理，遥感监测技术在汽车排气检测中的应用。并对所监测的数据作了简要的分析。     

我国城市污水几种处理工艺简介

介绍了近年来城市污水处理工程中常见的几种处理工艺和主要设计参数。     

重庆人口发展与生活污水治理对策的探讨

本文通过对重庆城区两江水质的分析表明：主要污染物来自人口急剧增加所产生的生活污水，从而提出了占地少、投资低、效果佳的沼气净化池处理方法和措施。     

Optimizing carbon sequestration in commercial forests by integrating carbon management objectives in wood supply modeling

This paper provides a methodology for generating forest management plans, which explicitly maximize carbon (C) sequestration at the forest-landscape level. This paper takes advantage of concepts first presented in a paper by Meng et al. (2003; Mitigation Adaptation Strategies Global Change 8:371–403) by integrating C-sequestration objective functions in existing wood supply models. Carbon-stock calculations performed in Woodstock^TM (RemSoft Inc.) are based on C yields generated from volume table data obtained from local Forest Development Survey plots and a series of wood volume-to-C content conversion factors specified in von Mirbach (2000). The approach is used to investigate the impact of three demonstration forest-management scenarios on the C budget in a 110,000 ha forest in south-central New Brunswick, Canada. Explicit demonstration scenarios addressed include (1) maximizing timber extraction either by clearcut or selection harvesting for greatest revenue generation, (2) maximizing total C storage in the forest landscape and in wood products generated from harvesting, and (3) maximizing C storage together with revenue generation. The level of clearcut harvesting was greatest for scenario 1 (≥15 × 10⁴ m³ of wood and ≥943 ha of land per harvesting period), and least for scenario 2 (=0 m³ per harvesting period) where selection harvesting dominated. Because softwood saw logs were worth more than pulpwood ($60 m⁻³ vs. $40 m⁻³) and were strategic to the long-term storage of C, the production of softwood saw logs exceeded the production of pulpwood in all scenarios. Selection harvesting was generally the preferred harvesting method across scenarios. Only in scenario 1 did levels of clearcut harvesting occasionally exceed those of selection harvesting, mainly in the removal of old, dilapidated stands early in the simulation (i.e., during periods 1 through 3). Scenario 2 provided the greatest total C-storage increase over 80 years (i.e., 14 × 10⁶ Mg C, or roughly 264 Mg ha⁻¹) at a cost of $111 per Mg C due to lost revenues. Scenarios 3 and 1 produced reduced storage rates of roughly 9 × 10⁶ Mg C and 3 × 10⁶ Mg C, respectively; about 64% and 22% of the total, 80-year C storage calculated in scenario 2. The bulk of the C in scenario 2 was stored in the forest, amounting to about 76% of the total C sequestered.     

军港舰船油污水间歇式处理系统的研究

阐述了军港油污水间歇式处理系统的组成和处理工艺流程；较详细地分析了该系统用的无机一有机复合混凝剂和高效亲脂吸附过滤材料的性能，以及在舰船油污水处理中发挥的重要作用；试验研究表明，该处理系统工艺不复杂、操作方便，而且科技含量高、处理效果好。     

曝气生物滤池处理矿区生活污水

概述了曝气生物滤池技术的结构形式、净化原理、特点、设计参数、填料选择等，并分析了煤矿矿区生活污水的特点和现有处理设施存在的问题等。根据煤矿企业现有条件、污水水质，采用机物容积负荷大、水力停留时间短、投资省、净化效果好、出水水质稳定、操作简便的曝气生物滤池技术处理矿区生活污水，具有广阔的应用前景。     

A2/O法处理城市污水工程实例

介绍了黄冈市遗爱湖污水处理厂的工艺流程,各构筑物和主要设备的参数.该工艺采用A2/O生物处理池、二沉池及消毒池合建,具有占地小,能耗省的特点,且出水水质达到<城镇污水处理厂污染物排放标准>(GB18918-2002)中的一级标准的B标准.     

炼油污水回用深度处理的工艺研究

通过大量的试验数据 ,对常规深度处理工艺与悬浮填料生物接触氧化工艺的处理效果进行比较 ,找出一种适合于石化公司炼油污水回用的深度处理工艺。由于该公司炼油污水在同行业中具有代表性 ,因此本研究可以作为相关污水回用处理工艺选择的参考