岩体开挖卸荷过程力学特性分析

基于岩体开挖卸荷过程中力学参数变化理论的分析研究,建立卸荷岩体有限元分析模型,运用ADINA有限元分析软件对岩体进行一维卸荷数值仿真研究。根据有限元数值分析计算成果得到岩体力学参数与主卸荷方向累计开挖卸荷量间的变化关系曲线。结果表明:岩体开挖卸荷过程中,岩体力学参数变形模量、泊松比、粘聚力和内摩擦角等呈现出随开挖卸荷量的变化而发生变化的特征,随卸荷量的增大有减小的趋势,但它们不是从初始值一直减小到零,而是随卸荷量的增大减小到一定的量值后,岩体的裂隙张开、结构面的扩展到一定的程度,岩体的力学参数保持一定的量级不再减小。     

深部“三软”高应力软岩巷道卸压耦合支护技术

为解决杨河煤业高应力软岩巷道的支护问题,对杨河煤业深部软沿巷道变形破坏特征及原因进行分析,提出支架-锚杆-围岩卸压耦合支护技术,并结合42轨道下山试验巷道对耦合卸压支护技术参数进行阐述,通过矿压观测结果可知:42轨道下山在采用卸压耦合支护技术后,有效控制了巷道强烈变形。     

页岩气开采中压裂废液处理技术的发展及应用

作为新型的天然气资源,近年来页岩气的开采力度不断增加。文章广泛调研页岩气开采过程中的场地修复、压裂废液处理等方面的环境污染风险,国内外现行压裂废液的处理工艺,系统分析了中和法、絮凝法和氧化法等处理工艺,并结合实际应用效果和企业需求对技术发展方向进行了预测,可为非常规油气资源开发领域提供理论参考。     

Petrophysical analysis to investigate the effects of carbon dioxide storage in a subsurface saline aquifer at Ketzin, Germany (CO2SINK)

To test the injection behaviour of CO₂ into brine-saturated rock and to evaluate the dependence of geophysical properties on CO₂ injection, flow and exposure experiments with brine and CO₂ were performed on sandstone samples of the Stuttgart Formation representing potential reservoir rocks for CO₂ storage. The sandstone samples studied are generally fine-grained with porosities between 17 and 32% and permeabilities between 1 and 100 mD.Additional batch experiments were performed to predict the long-term behaviour of geological CO₂ storage. Reservoir rock samples were exposed over a period of several months to CO₂-saturated reservoir fluid in high-pressure vessels under in situ temperature and pressure conditions. Petrophysical parameters, porosity and the pore radius distribution were investigated before and after the experiments by NMR (Nuclear Magnetic Resonance) relaxation and mercury injection. Most of the NMR measurements of the tested samples showed a slight increase of porosity and a higher proportion of large pores.     

页岩对污泥氨气挥发的抑制作用

氨气是城市污水污泥产生的恶臭气体之一,控制或抑制其产生是资源化利用甚至处置过程中至关重要的.通过改进氨气测量方法定量分析外掺页岩对污泥氨气挥发的抑制作用和机理,实验研究了页岩掺量、陈放形式以及环境温度对污泥氨气挥发浓度的影响.结果表明,外掺页岩对污泥氨气挥发具有明显的抑制作用,随温度升高、陈放时间延长抑制效果有所减弱但仍具有明显作用;页岩对污泥氨气挥发的抑制作用主要为对氨气的吸附作用.     

臭氧氧化处理页岩气钻井废水的机理与动力学

采用臭氧氧化法处理页岩气钻井废水经混凝沉淀后的出水(COD=759.63 mg/L),重点研究了废水中有机污染物的去除机理与反应动力学。实验结果表明:在废水pH为11.2、臭氧通入量为8 mg/min、反应时间为50 min的最佳工艺条件下,废水的COD去除率为42.51%;羟基自由基抑制剂CO_3~(2-)、HCO_3~-和叔丁醇的引入抑制了废水COD的臭氧氧化去除,尤其是叔丁醇的加入使COD去除率显著下降,说明废水中有机物的臭氧氧化去除过程遵循羟基自由基机理;臭氧氧化法对钻井废水中有机物的氧化去除过程符合表观二级反应动力学规律。     

新疆巩留县博图沟泥石流灾害及灾因分析

本文分析了1991年新疆博图沟罕见泥石流灾害及灾因,认为这次灾害主要是自然因素,与人为因素关系不大,并提出了在山区工作、游牧应注意的事项。     

Sustainable Agriculture: New Paradigms and Old Practices? Increased Production with Management of Organic Inputs in Senegal

Farmers in Sahelian countries are confronted with a variety of soil fertility and management problems. During the last two decades, NGOs have worked with farmers and research institutions to develop and test practices that will increase food production, while at the same time enhance the natural resource base.Since 1987, The Rodale Institute (RI) has worked closely with farmers' associations and government institutions to promote regenerative agriculture-farming systems that prioritize the use of local resources while improving them as they are used to grow food, using agro-ecological methods. The Senegalese Agricultural Research Institute has collaborated in this program as a partner of RI. The Senegal Regenerative Agriculture Resource Center model has been applied as a new and viable approach that builds on traditional knowledge and farmer-to-farmer exchange.Research results on soil conservation and improvement have shown that fields spread with amended animal manure or compost yield greater harvests than fields farmed with traditional methods.     

提高节理面c和φ对岩坡开挖变形的影响

为了反映岩质边坡在节理面注浆后的变形效应,首先,通过室内试验,分析注浆前后岩体变形和破坏的全过程,以探讨其抗剪性能(粘结力c和内摩擦角φ)的变化;然后,基于理想弹塑性本构模型的Mohr-Cou-lomb准则,运用拉格朗日元数值方法(FLAC3D),对岩坡注浆前后变形效应(水平位移、垂直位移、剪应变增量)进行模拟。结果表明:注浆加固后,岩体的位移场变得均匀和连续,节理面处的较大位移受到抑制,边坡的整体性得到提高,有利于边坡的稳定性。     

降低地下矿深孔爆破落矿大块率的技术措施

降低深孔爆破落矿大块率是矿山凿岩中的一个重要课题。笔者对地下矿深孔爆破落矿中大块产生位置及原因进行分析;探讨在炸药单耗、孔网布置、装药结构、堵塞长度、微差间隔、起爆方式等方面对其产生影响的规律;提出地下矿深孔爆破落矿中通过优化爆破参数降低大块率的技术措施。该优化技术措施主要有:减少地质构造对深孔落矿的影响,合理确定炸药单耗的方法,使用大孔距小抵抗线落矿技术,采用多种装药结构技术,采用多排微差起爆技术,加强深孔的施工管理和加强爆破施工的现场管理。这些措施在工程实践中获得了良好的应用效果。