广州港船舶垃圾接收情况分析

对近十年来广州港船舶垃圾接收资料进行了统计和分析 ,并对如何做好船舶垃圾接收工作提出几点建议     

A PCE groundwater plume discharging to a river: influence of the streambed and near-river zone on contaminant distributions

An investigation of a tetrachloroethene (PCE) groundwater plume originating at a dry cleaning facility on a sand aquifer and discharging to a river showed that the near-river zone strongly modified the distribution, concentration, and composition of the plume prior to discharging into the surface water. The plume, streambed concentration, and hydrogeology were extensively characterized using the Waterloo profiler, mini-profiler, conventional and driveable multilevel samplers (MLS), Ground Penetrating Radar (GPR) surveys, streambed temperature mapping (to identify discharge zones), drivepoint piezometers, and soil coring and testing. The plume observed in the shallow streambed deposits was significantly different from what would have been predicted based on the characteristics of the upgradient plume. Spatial and temporal variations in the plume entering the near-river zone contributed to the complex contaminant distribution observed in the streambed where concentrations varied by factors of 100 to 5000 over lateral distances of less than 1 to 3.5 m. Low hydraulic conductivity semi-confining deposits and geological heterogeneities at depth below the streambed controlled the pattern of groundwater discharge through the streambed and influenced where the plume discharged into the river (even causing the plume to spread out over the full width of the streambed at some locations). The most important effect of the near-river zone on the plume was the extensive anaerobic biodegradation that occurred in the top 2.5 m of the streambed, even though essentially no biodegradation of the PCE plume was observed in the upgradient aquifer. Approximately 54% of the area of the plume in the streambed consisted solely of PCE transformation products, primarily cis-1,2-dichloroethene (cDCE) and vinyl chloride (VC). High concentrations in the interstitial water of the streambed did not correspond to high groundwater-discharge zones, but instead occurred in low discharge zones and are likely sorbed or retarded remnants of past high-concentration plume discharges. The high-concentration areas (up to 5529 microg/l of total volatile organics) in the streambed are of ecological concern and represent potential adverse exposure locations for benthic and hyporheic zone aquatic life, but the effect of these exposures on the overall health of the river has yet to be determined. Even if the upgradient source of PCE is remediated and additional PCE is prevented from reaching the streambed, the high-concentration deposits in the streambed will likely take decades to hundreds of years to flush completely clean under natural conditions because these areas have low vertical groundwater flow velocities and high retardation factors. Despite high concentrations of contaminants in the streambed, PCE was detected in the surface water only rarely due to rapid dilution in the river and no cDCE or VC was detected. Neither the sampling of surface water nor the sampling of the groundwater from the aquifer immediately adjacent to the river gave an accurate indication of the high concentrations of PCE biodegradation products present in the streambed. Sampling of the interstitial water of the shallow streambed deposits is necessary to accurately characterize the nature of plumes discharging to rivers.     

美国海军舰艇命名体系研究

美国海军舰艇命名体系由任命前缀、舰艇名称、分类代号、舷号4类要素构成,首先分析了每类要素对于命名体系的贡献,然后基于美国海军舰艇命名体系,以美国海军舰艇名册为数据源,通过要素提取、规则建立等步骤分析美国海军现役舰艇组成。经过分析,美国现役715艘舰艇分为战斗舰、辅助舰、战斗艇、支援艇、未在分类代号中定义等5大类67类型177级别,通过对比基于类型与级别规则、基于任命前缀规则的结果挖掘出美国海军现役舰艇组成规律。     

青岛海洋环境碳纤维复合材料与低合金钢电偶腐蚀研究

目的 探究碳纤维复合材料在舰船应用时与金属材料的电偶腐蚀问题。方法 针对一种典型舰船用碳纤维增强乙烯基树脂复合材料,在青岛海洋大气环境下开展0.5、1、1.5、2 a期的自然曝晒试验,进而采用电化学分析手段考察其与低合金钢的电偶腐蚀效应,结合老化机制探究碳纤维复合材料的老化行为对其与钢电偶腐蚀的影响。结果及结论 在青岛大气环境曝晒不同周期的复合材料试样,开路电位与低合金钢相差较大,存在较高的电偶腐蚀倾向。随曝晒时间的延长,复合材料表面微裂纹不断产生、扩展,导致电化学反应活性点增多,两者电偶电流密度随之增大。在青岛海洋大气环境下暴露2 a后,碳纤维增强乙烯基树脂复合材料与低合金钢的电偶电流为0.356 9 μA/cm²,两者的电偶腐蚀敏感性达到B级。     

基于AIS轨迹修复的船舶排放空间表征改进方法与应用

基于船舶自动识别系统(Automatic Identification System,AIS)数据表征船舶排放是目前船舶排放空间表征的主流方法,但AIS船舶轨迹点缺失会造成船舶排放量低估和船舶空间分布表征错误,进而影响船舶排放控制区的划分.为改进船舶排放空间表征,本研究以2013年广东省AIS船舶数据为例,采用基于时间和经纬度的三次样条方法对AIS船舶轨迹进行修复,结合动力法计算船舶排放,分析对比AIS轨迹修复前后船舶排放表征的差异,并利用空气质量模型和卫星观测评估AIS轨迹修复对船舶排放表征和广东沿海空气质量模拟的改进效果.结果表明:轨迹修复后广东省海域船舶轨迹点总数由4685773个增至5746664个,船舶NO_x排放量增加了0.6%.对于轨迹点与排放缺失集中的粤东海域,轨迹修复后船舶轨迹点数增加了88%,NO_x排放量在广东省船舶排放量的占比提升至22%,特别是在粤东重点修复海域NO_x排放量增加了2.7倍.原始轨迹在广东省海域较为稀疏,在粤东海域有明显轨迹缺失;轨迹修复后广东省海域船舶轨迹更为密集,粤东海域船舶轨迹得...     

船舶废气排放扩散模拟计算方法研究

基于船舶AIS数据的船舶废气排放评估计算模型,以高斯烟团扩散模型为核心,结合船舶航行和排放特征,构建移动船舶源排放烟团扩散模型。利用控制变量法,在其他变量参数相同条件下,分别设定不同风向、不同大气稳定度、不同高程平面,仿真模拟航行状态下的船舶排放烟团扩散至空间环境中的质量浓度分布情况,分析船舶在不同环境参数下的扩散特征。结果表明,仿真模拟结果与实际气体空间质量浓度分布情况相符。通过在深圳市盐田港区布设船舶废气排放岸基固定嗅探监测设备,对港区进、离港和过往船舶进行大气污染物排放组分(SO2、CO2、NO、NO2)全天在线实时监测,以SO2作为试验样本气体,船舶排放的SO2排放至监测站的模拟质量浓度与实际监测质量浓度标准误差为19.81%,在合理的误差范围内,验证了船舶废气排放扩散模拟计算方法的科学有效性。     

平面四杆机构在舰载垂直发射装置舱口盖系统中的应用分析

目的研究在舰载垂直发射装置舱口盖系统中设计平面四杆机构的方案的可行性与可靠性。方法提出舱口盖开盖系统设计方案,建立平面四杆机构开盖模型,进行理论分析与计算,建立ADAMS动力学仿真模型,对曲柄摇杆机构进行仿真分析,并与理论计算值进行对比。进行30～90kg负载试验,计算舱口盖开盖的角度和时间。结果舱口盖开盖解锁机构各构件的长度及电机的开盖扭矩应不小于569 N·m,转速应小于10 r/min。电机的开盖扭矩值应不小于509 N·m,复核复算结果基本一致。舱口盖开盖的角度应大于93°,开盖时间为2.8 s,满足要求。结论验证了方案的可行性,为其他垂直发射装置的舱口盖设计提供了工程经验。     

浅谈船舶油污事故的调查处理

对船舶发生油污事故的种类和可能来源，事故调查处理方法做了简要论述，同时对船舶发生污染事故后，主管机关如何对违法行为帮出行政处罚以及如何调解处理船舶油污损害民事责任纠纷做了简要探讨。     

船舶压载管系和压载舱结构设计中新问题的解决方法

IMO对船舶压载水的排放限制给船舶压载管系和压载舱室的设计提出了新的课题，文中设计了以喷射泵的抽吸作用进行循环更换压载水的压载系统，为解决相关问题提供了若干建议和思路。     

模糊神经网络方法在船舶油污事故损害赔偿评估中的应用研究

针对船舶油污事故损害赔偿评估非线性系统的复杂性，分析了人工神经网络技术在该领域应用的可能性，并以20个国际油污基金公约所承认著名赔偿案例为例建立船舶油污事故的神经网络评估模型，该模型对中国船舶油污事故损害赔偿评估具有一定的参考实用价值，为中国船舶油污事故损害赔偿评估提供了一种新颖而方便的计算方法。