加速量热仪在物质热稳定性研究中的应用

加速量热仪（ARC）是一种基于绝热原理设计的热分析仪器,与其它热分析仪器相比,加速量热仪可以测量克量级的固体或高闪点液体样品,具有测试样品最大,敏感度高等特点,并能够实时记录样品放热反应过程中的温度和压力变化,以过氧化氢叔丁基为例说明加速量热仪测试结果在研究物质质变热稳定性方面的应用,得到了过氧化氢叔丁基放热分解反应的温度－时间和压力－时间关系曲线以及升温速度和压力随温度变化的曲线,通过计算和分析得到了反应系统升压速率随压力的变化曲线,计算出了过氧化氢叔丁基分解反应的动力学参数表观活化能Ea和指前因子A。     

A method for supporting the design of efficient heating systems using EU product policy data

The design of heating, ventilation and air conditioning systems is still a challenging engineering task which requires experienced and informed decision-making. These systems have a great energy-saving potential at the system level rather than at the level of the individual products of which they are composed. European environmental product policies have been very useful in facilitating a homogeneous rating scheme which can be used to compare the energy performance of different products that provide the same service. This paper proposes a simplified design method which uses the performance of components that are regulated by European product policies to obtain the overall performance of heating systems in residential buildings. It is a flexible method and allows different product configurations to be assessed so as to optimise the system performance during the design phase. The method is tested on a real case study with domestic hot water and space heating systems. The case study shows the potential for improving the heating systems according to the performance levels of its products currently available in the market. Results of the domestic hot water system show that upgrading its storage tank to the maximum energy class (A⁺) could bring the highest energy savings ( 4162 kWh/y).     

微波消解技术在沉积物样品元素分析中的应用

在沉积物样品元素分析中样品预处理即样品的消解是一个重要步骤。微波样品消解技术近十几年来受到普遍关注。本文小结了这一技术在沉积物元素分析应用中的一些重要问题,包括消解试剂体系的选择,消解程序和时间的确定等。     

用直接加热代替水浴加热测定高锰酸盐指数

在地表水高锰酸盐指数酸性法分析中,通过对2种加热方法的实验对比,结果表明,直接加热法具有省时、省力,且精密度、准确度均能满足环境监测规范要求等优点,特别适用于大批量样品分析。     

寻求解决乌鲁木齐市空气污染的途径

针对乌鲁木齐市最突出的环境问题——冬季采暖期空气污染,从主客观二方面进行了原因分析,并结合“十一五”和2020年环境保护目标,从7个方面分析论述了解决乌鲁木齐市空气污染的途径,使多年困扰乌鲁木齐市的空气污染问题有望从根本上得到解决。     

程序升温微波辐照法解吸活性炭上吸附的甲苯

利用微波辐照作为加热手段,采用程序升温的方法对活性炭上吸附的甲苯进行解吸。程序升温条件为：初始温度及升温幅度为100℃,每个温度点保持10min,终温500℃保持5min。实验结果表明,程序升温解吸45min,甲苯解吸率达91％。程序升温和400℃恒温微波辐照解吸两种方法对比发现,甲苯解吸率达90％的时间基本相当,但程序升温解吸的能量消耗更小,能量利用率更高。     

Microwave-assisted stripping of oil contaminated drill cuttings

The application of microwave heating technology to conventional gas stripping processes has been investigated in the remediation of contaminated drill cuttings. The technical feasibility and limitations of nitrogen and steam stripping processes are demonstrated, and it is shown that the combination of microwave heating with the stripping process offers a step change in performance. Order of magnitude improvements in processing time are shown for the microwave-assisted processes, as well as greatly improved levels of remediation. The mechanisms of contaminant removal are discussed, along with the phenomena which occur with microwave heating processes. The energy requirements of each of pure gas and microwave-assisted processes are also discussed, and the potential applications of each technology are highlighted relative to the overall remediation requirements.     

转锥式生物质热解装置中热载体加热方案选择与设计

根据转锥式生物质热解装置中对加热设备的要求,先后分别选择和设计了三种不同的加热方案,在实际应用中逐步了解每套加热设备的优缺点,为加热设备的改进和该项技术的应用推广奠定坚实的基础.     

干介质微波辐射加热法合成蒽醌的研究

采用干介质为催化剂,微波辐射加热合成蒽醌反应速度快,产率高,污染小,是一种很有研究与应用价值的清洁生产方法。笔者通过正交试验观测了微波辐照条件下合成蒽醌的最佳反应条件,着重研究了邻苯甲酰苯甲酸环化脱水缩合生成蒽醌的产率与微波功率、微波辐照时间、邻苯甲酰苯甲酸与催化剂配比、热浴物质混合配比间的关系。      

宣化城区大气TSP浓度特征及来源分析

以宣化区大气环境监测数据为基础,评价了宣化城区非采暖期和采暖期TSP污染的现状,分析了TSP污染的日变化特征.根据X荧光分析测定的TSP元素成分,采用因子分析法探讨了TSP污染的来源.宣化城区TSP在非采暖期以冶金行业排放为主要来源,采暖期则以燃煤为主要来源.最后,针对污染物来源提出了城区TSP污染控制对策.