某厂房吊车卡轨原因检测

通过对某厂房进行检测，对造成吊车卡轨各种原因进行分析。判定，根据原因分析结果提出相应的处理措施，消除隐患。     

城市轨道交通项目主要环境问题简要分析——以哈尔滨市轨道交通一期工程为例

通常以电能为动力,采取轮轨运转方式的快速大运量公共交通总称为轨道交通.未来10年,中国城市、城际轨道交通建设里程将达到1200公里～1500公里,它意味着未来城市交通结构趋于合理,公共交通成为城市主导客运方式,交通拥堵状况得到缓解和改善.在不断发展的同时,城市轨道交通建设由于其本身的特点,其噪声和振动的环境污染越来越引起关注.本文分析该行业重点环境问题,有效的控制轨道交通运营中的环境污染,最大限度的减少对沿线环境的影响.     

CRT用销钉冲压切边工位的模具改进

介绍了CRT用销钉冲压切边工位的模具改进,提出利用冲裁问隙及凹模圆角等因素来达到工艺的特殊要求的一种情况.     

城市轨道交通在生态城市建设中的作用

以生态城市基本理论为依据,探讨了生态城市交通系统所应具备的特征。通过分析我国大城市交通面临的主要问题,以及发展城市轨道交通在提高城市交通系统资源、能源利用效率和降低城市交通污染以及引导城市结构优化等方面的巨大优势,阐明发展以城市轨道交通为骨干的交通系统将是促进我国现阶段生态城市建设重要的前瞻性举措。     

新型长时热流测量装置的研制及应用

目的设计一种新型热流测量装置,使传感器满足长时间热流测量的需求,且传感器外表面可以适量打磨,与飞行器的气动外型面完好随型。方法采用铜和钢作为备选材料,施加相同的表面热流边界,对比敏感端内外壁温差情况。优化热流辨识传感器传热路径、敏感端厚度,通过有限元模型分析打磨对热流辨识结果的影响。基于优化结果,研制出热流测量装置,并通过地面试验验证该装置的有效性。结果从热响应获取时间延迟角度来看,Cu比钢具有较大的优势。综合考虑敏感端外表面需要与飞行器外表面随型打磨,选用5 mm的厚度具有一定的安全可靠性。敏感端的适度打磨基本不影响温度测量结果。辨识获得的热流数据与实际控制热流吻合较好,最大偏差约15%。结论成功研制了热流测量装置,并通过地面热试验证明了热流测量的有效性。     

Driver injury severity related to inclement weather at highway–rail grade crossings in the United States

Objective: Previous studies on crash modeling at highway–rail grade crossings were aimed at exploring the factors that are likely to increase the crash frequencies at highway–rail grade crossings. In recent years, modeling driver's injury severity at highway–rail grade crossings has received interest. Because there were substantial differences among different weather conditions for driver's injury severity, this study attempts to explore the impact of weather influence on driver injury at highway–rail grade crossing.

Method: Utilizing the most recent 10 years (2002–2011) of highway–rail grade crossing accident data, this study applied a mixed logit model to explore the determinants of driver injury severity under different weather conditions at highway–rail grade crossing.

Results: Analysis results indicate that drivers' injury severity at highway–rail grade crossings is strongly different for different weather conditions. It was found that the factors significantly impacting driver injury severity at highway–rail grade crossings include motor vehicle speed, train speed, driver's age, gender, area type, lighting condition, highway pavement, traffic volume, and time of day.

Conclusions: The findings of this study indicate that crashes are more prevalent if vehicle drivers are driving at high speed or the oncoming trains are high speed. Hence, a reduction in speed limit during inclement weather conditions could be particularly effective in moderating injury severity, allowing more reaction time for last-minute maneuvering and braking in moments before impacts. In addition, inclement weather-related crashes were more likely to occur in open areas and highway–rail grade crossings without pavement and lighting. Paved highway–rail grade crossings with installation of lights could be particularly effective in moderating injury severity.     

Biofidelity assessment of the 6-year-old ATDs in lateral impact

Objectives: The objective of this study was to assess and compare the current lateral impact biofidelity of the shoulder, thorax, abdomen, and pelvis of the Q6, Q6s, and Hybrid III (HIII) 6-year-old anthropomorphic test devices (ATDs) through lateral impact testing.

Methods: A series of lateral impact pendulum tests, vertical drop tests, and Wayne State University (WSU) sled tests was performed, based on the procedures detailed in ISO/TR 9790 (1999) and scaling to the 6-year-old using Irwin et al. (2002 Irwin AL, Mertz HJ, Elhagediab AM, Moss S. Guidelines for assessing the biofidelity of side impact dummies of various sizes and ages. Stapp Car Crash J. 2002;46:297–319.[PubMed] , [Google Scholar]). The HIII used in this study was tested with the Ford-designed abdomen described in Rouhana (2006 Rouhana SW. Abdominal impact injury research—a review. J Biomech. 2006;39(Suppl 1):S157–S158. [Google Scholar]) and Elhagediab et al. (2006 Elhagediab AM, Hardy WN, Rouhana SW. Advancements in the rate-sensitive abdomen for the Hybrid III family of dummies. J Biomech. 2006;39(Suppl 1):S158.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]). The data collected from the 3 different ATDs were filtered using SAE J211 (SAE International 2003 SAE International. Surface Vehicle Recommended Practice. Instrumentation for Impact Test—Part 1—Electronic Instrumentation. Warrendale, PA: SAE International; 2003. SAE Standard J211-1. [Google Scholar]), aligned using the methodology described by Donnelly and Moorhouse (2012 Donnelly BR, Moorhouse K. Optimized phasing of PMHS response curves for biofidelity targets. Paper presented at: IRCOBI Conference; 2012. [Google Scholar]), and compared for each body region tested (shoulder, thorax, abdomen, and pelvis). The biofidelity performance in lateral impact for the 3 ATDs was assessed against the scaled biofidelity targets published in Irwin et al. (2002 Irwin AL, Mertz HJ, Elhagediab AM, Moss S. Guidelines for assessing the biofidelity of side impact dummies of various sizes and ages. Stapp Car Crash J. 2002;46:297–319.[PubMed] , [Google Scholar]), the abdominal biofidelity target suggested in van Ratingen et al. (1997 van Ratingen M, Twisk D, Schrooten M, Beusenberg M. Biomechanically based design and performance targets for a 3-year-old child crash dummy for frontal and side impact. Paper presented at: 41st Stapp Car Crash Conference; 1997. [Google Scholar]), and the biofidelity targets published in Rhule et al. (2013 Rhule H, Donnelly B, Moorhouse K, Kang YS. A methodology for generating objective targets for quantitatively assessing the biofidelity of crash test dummies. Paper presented at: 23rd Enhanced Safety of Vehicles Conference; 2013. [Google Scholar]). Regional and overall biofidelity rankings for each of the 3 ATDs were performed using both the ISO 9790 biofidelity rating system (ISO/TR 9790 1999) and the NHTSA's external biofidelity ranking system (BRS; Rhule et al. 2013 Rhule H, Donnelly B, Moorhouse K, Kang YS. A methodology for generating objective targets for quantitatively assessing the biofidelity of crash test dummies. Paper presented at: 23rd Enhanced Safety of Vehicles Conference; 2013. [Google Scholar]).

Results: All 3 6-year-old ATD's pelvises were rated as least biofidelic of the 4 body regions tested, based on both the ISO and BRS biofidelity rating systems, followed by the shoulder and abdomen, respectively. The thorax of all 3 ATDs was rated as the most biofidelic body region using the aforementioned biofidelity rating systems. The HIII 6-year-old ATD was rated last in overall biofidelity of the 3 tested ATDs, based on both rating systems. The Q6s ATD was rated as having the best overall biofidelity using both rating systems.

Conclusions: All 3 ATDs are more biofidelic in the thorax and abdomen than the shoulder and pelvis, with the pelvis being the least biofidelic of all 4 tested body regions. None of the 3 tested 6-year-old ATDs had an overall ranking of 2.0 or less, based on the BRS ranking. Therefore, it is expected that none of the 3 ATDs would mechanically respond like a postmortem human subject (PMHS) in a lateral impact crash test based on this ranking system. With respect to the ISO biofidelity rating, the HIII dummy would be considered unsuitable and the Q-series dummies would be considered marginal for assessing side impact occupant protection.     

城市轨道交通高架桥工程施工的安全管理

城市轨道交通高架桥工程施工环境的复杂性和专业性决定了高架桥施工的高风险性,为了实现高架桥施工安全建设目标,必须对其风险实施系统安全管理.本文从高架桥工程施工的安全策划着手,结合某高架桥施工安全管理实例,对高架桥施工中危险源和危害因素识别和控制进行了论述和分析,以期为国内城市轨道交通高架桥建设安全管理提供借鉴和参考.     

Instrumental and bio-monitoring of heavy metal and nanoparticle emissions from diesel engine exhaust in controlled environment

In the present article we characterized the emissions at the exhaust of a Common Rail (CR) diesel engine, representative of lightduty class, equipped with a catalyzed diesel particulate filter (CDPF) in controlled environment. The downstream exhausts were directly analyzed (for PM, CO, CO2, O2, HCs, NOx) by infrared and electrochemical sensors, and SEM-EDS microscope; heavy metals were chemically analyzed using mosses and lichens in bags, and glass-fibre filters all exposed at the engine exhausts. The highest particle emission value was in the 7–54 nm size range; the peak concentration rose until one order of magnitude for the highest load and speed. Particle composition was mainly carbonaceous, associated to noticeable amounts of Fe and silica fibres. Moreover, the content of Cu, Fe, Na, Ni and Zn in both moss and lichen, and of Al and Cr in moss, was significantly increased. Glass-fibre filters were significantly enriched in Al, B, Ba, Cu, Fe, Na, and Zn. The role of diesel engines as source of carbonaceous nanoparticles has been confirmed, while further investigations in controlled environment are needed to test the catalytic muffler as a possible source of silica fibres considered very hazardous for human health.     

京沪高速铁路跨阳澄湖特大桥不同施工方案SS浓度场模拟研究

为了对比京沪高铁双排筑坝围堰施工和钢栈桥施工两种施工方案对阳澄湖西湖湖区SS浓度场的影响程度,探讨阳澄湖大桥施工方式对阳澄湖SS浓度场的影响规律,开展阳澄湖现状水质监测,采用Delft-3D可视水动力-水质联合模拟软件系统对SS浓度场进行模拟研究。结果表明,相对于栈桥施工,双排筑坝围堰施工对水体SS浓度影响较小,对阳澄湖水环境保护作用明显。