Adsorption of basic dye from aqueous solution onto fly ash

The fly ash treated by H₂SO₄ was used as a low-cost adsorbent for the removal of a typical dye, methylene blue, from aqueous solution. An increase in the specific surface area and dye-adsorption capacity was observed after the acid treatment. The adsorption isotherm and kinetics of the treated fly ash were studied. The experimental results were fitted using Langmuir and Freundlich isotherms. It shows that the Freundlich isotherm is better in describing the adsorption process. Two kinetic models, pseudo-first order and pseudo-second order, were employed to analyze the kinetic data. It was found that the pseudo-second-order model is the better choice to describe the adsorption behavior. The thermodynamic study reveals that the enthalpy (ΔH⁰) value is positive (5.63 kJ/mol), suggesting an endothermic nature of the adsorption.     

Photocatalytic degradation of disperse blue 1 using UV/TiO2/H2O2 process

The photocatalytic degradation of a dye derivative, C.I. disperse blue 1 (1), has been investigated under UV light irradiation in the presence of TiO2 and H2O2 under a variety of conditions. The degradation was studied by monitoring the change in substrate concentration employing UV spectroscopic technique as a function of irradiation time. The degradation was studied under different conditions such as different types of TiO2, reaction pH, catalyst and substrate concentration containing hydrogen peroxide (H2O2), besides molecular oxygen in the presence of TiO2. The degradation of dye was also investigated under sunlight and the efficiency of degradation was compared with that of the artificial light source. The degradation rates were found to be strongly influenced by all the above parameters. The photocatalyst Degussa P25 was found to be more efficient for the degradation of the dye.     

间接电化学降解亚甲基蓝废水的可行性研究

研究以ClO^-／Cl^-作媒介，间接电化学降解亚甲基蓝模拟废水的可行性。结果表明，亚甲基蓝的电化学降解与电极材料、电流密度以及添加剂种类等因素有关。以石墨为阳极，不锈钢为阴极，在无隔膜的烧杯中放置50ml浓度为1000mg/L的亚甲基蓝模拟废水，在室温25℃，pH6．0－8．0，槽电压10V，电流密度30．0mA/cm^2，Cl^-加入量2g/L的条件下，电解60min后，亚甲基蓝溶液的平均消色率达到98．0％，CODcr降解率为97．0％，BOD5降解率为99．0％；用浸涂过MnO2薄膜的石墨棒作阳极可显著加快其消解速率，而用浸涂过CeO2薄膜的石墨棒作阳极对其消解速率无明显的影响。并初步讨论了其降解机理。     

粗铜酞菁颜料生产中的三废治理

粗铜酞菁生产尾气中的氨可用硫酸吸收制硫酸铵,粉尘可用捕集器回收,废水采用物化与生化相结合的治理工艺,效果好,投资少,运行费用低,并可回收铜。     

兼氧混合菌对亚甲基蓝废水生物降解实验研究

采用厦门某生物科技有限公司提供的兼氧混合菌为研究对象,利用相关设备进行中试实验,验证了该项技术的可行性。同时探究了重金属对该混合菌种生物降解能力的影响,通过中试实验研究后发现5mg/L的重铬酸钾和硫酸铜均对该混合菌种的生物降解能力有一定的影响,并且硫酸铜的影响大于重铬酸钾。此外该技术对甲基橙、刚果红废水也有一定的生物降解能力,这为兼氧混合菌用于印染废水处理提供了实验依据。     

反应气氛对绿色合成纳米铁的组分及其活性的影响

成本低廉和无二次污染的"绿色"合成纳米材料是发展原位纳米环境修复技术的前沿研究课题之一.本文以绿茶提取液为还原剂和稳定剂进行"绿色"合成纳米铁,探讨在不同的气氛下"绿色"合成的纳米铁颗粒的主要成分,以期为调控合成纳米铁系材料提供基础研究.首先,利用扫描电子显微镜(SEM)、X射线能谱(EDS)、X射线光电子能谱分析(XPS)和傅里叶变换红外光谱(FTIR)等表征手段对不同反应气氛下合成的纳米铁颗粒的表面微观形貌、尺寸和价态结构进行分析.结果发现,在通入N2情况下,合成的纳米铁颗粒粒径为(84.7±11.5)nm,其主要成分以纳米零价铁为主;在通入空气情况下,合成的纳米铁粒径为(117.8±26.2)nm,其主要成分是纳米零价铁、氧化铁和四氧化三铁的混合物;通入O2时,合成的纳米铁粒径为(141.2±26.3)nm,其主要成分以四氧化三铁为主.其次,评价在不同气氛条件下合成纳米铁颗粒对去除亚甲基蓝(MB)的反应活性.结果表明,在反应温度313 K下降解初始浓度为50 mg·L-1的MB溶液,反应5 min时已达到平衡,通入N2合成的纳米铁降解MB,去除率高达98.7%,而通入O2合成的纳米铁反应效率低,对MB的去除率仅为65.3%.最后,从以上发现提出不同气氛下可以调控"绿色"合成的铁系纳米材料成分,从而导致不同的纳米修复环境中污染物的能力.     

氧化石墨烯对亚甲基蓝和铜离子的共吸附行为研究

氧化石墨烯(GO)具有高比表面积和丰富的含氧官能团,表面存在着大量的吸附点位,被认为是去除水体污染物的高效吸附剂,而其在有机物-重金属复合污染环境中的吸附行为却鲜有报道.因此,本文采用改良Hummers法制备出GO,通过扫描电镜(SEM)、透射电镜(TEM)、红外光谱(FTIR)、拉曼光谱(Raman)和X射线衍射(XRD)等物理表征方法对GO的形貌结构和表面官能团进行了表征.随后,侧重研究了GO对有机物及重金属污染物的单独和共吸附行为,选取亚甲基蓝(MB)与Cu(Ⅱ)作为复合污染水体的特征污染物,探讨了不同浓度Cu(Ⅱ)对MB及不同浓度MB对Cu(Ⅱ)的吸附性能的影响.结果表明,不同类型的污染物单独存在时,GO对MB和Cu(Ⅱ)的吸附量分别为29.13和424.16mg·g-1;而当上述两种污染物共存时,GO对MB和Cu(Ⅱ)的吸附性能均明显下降,这说明MB与Cu(Ⅱ)在GO表面的吸附点位存在着竞争吸附关系,并且MB对Cu(Ⅱ)吸附的抑制作用明显高于Cu(Ⅱ)对MB吸附的影响.     

Activated carbon coated palygorskite as adsorbent by activation and its adsorption for methylene blue

An activation process for developing the surface and porous structure of palygorskite/carbon(PG/C) nanocomposite using ZnC l2 as activating agent was investigated. The obtained activated PG/C was characterized by X-ray diffraction(XRD), Fourier transform infrared spectroscopy(FTIR), field-emission scanning electron microscopy(SEM), and Brunauer–Emmett–Teller analysis(BET) techniques. The effects of activation conditions were examined,including activation temperature and impregnation ratio. With increased temperature and impregnation ratio, the collapse of the palygorskite crystal structure was found to accelerate and the carbon coated on the surface underwent further carbonization. XRD and SEM data confirmed that the palygorskite structure was destroyed and the carbon structure was developed during activation. The presence of the characteristic absorption peaks of C_C and C–H vibrations in the FTIR spectra suggested the occurrence of aromatization. The BET surface area improved by more than 11-fold(1201 m2/g for activated PG/C vs. 106 m2/g for PG/C) after activation, and the material appeared to be mainly microporous. The maximum adsorption capacity of methylene blue onto the activated PG/C reached 351 mg/g. The activated PG/C demonstrated better compressive strength than activated carbon without palygorskite clay.     

钠化改性河南南部膨润土吸附亚甲基蓝性能分析

以河南南部天然钙基膨润土为原料,通过钠化改性得到了钠基膨润土.通过调控吸附剂用量、亚甲基蓝（MB）浓度、吸附时间、溶液pH值和温度,分析对比了天然钙基膨润土（PRT-1）、钙基提纯膨润土（PRT-1T）和钠基膨润土（PRT-1Na）对MB的去除效率.同时,对PRT-1T和PRT-1Na对MB的吸附动力学和吸附机制进行了研究.结果表明,由于PRT-1Na有更大的比表面积、更高的阳离子交换容量和更丰富的羟基结构,表现出对MB更好的吸附效果.在同等吸附条件下,PRT-1Na的吸附效果是PRT-1的4倍,PRT-1T是PRT-1的2倍.在20℃,pH为6,PRT-1Na用量为1.0 g,吸附时间为2 h,MB为500 mL,且初始浓度为500 mg·L^-1时,MB去除率高达99.89%.另外,PRT-1Na对MB染料废水的吸附既存在物理吸附也有化学吸附,Elovich模型对PRT-1T和PRT-1Na吸附MB染料废水的过程拟合度均高,但伪一级动力学模型对PRT-1Na拟合效果最好.     

BiOCl/SiO2/Fe3O4复合材料可见光催化去除水中亚甲基蓝

以FeCl_3·6H_2O、FeCl_2·4H_2O、(C_2H_5)_4SiO_4、Bi(NO_3)_3·5H_2O、KCl为主要原料,采用化学共沉淀法和水热法制备了BiOCl/SiO_2/Fe_3O_4光催化剂,并对其进行EDS、TEM、XRD、FT-IR、UV-Vis表征,最后通过亚甲基蓝降解实验,研究了催化剂在合成过程中pH及催化剂投加量对其光催化性能的影响.结果表明,在pH=6、催化剂初始投加量为0.5 g·L~(-1)时,对亚甲基蓝的可见光催化效果最佳,光照120 min后对10 mg·L~(-1)的亚甲基蓝溶液的脱色率达到93.2%.BiOCl/SiO_2/Fe_3O_4经过简单的无水乙醇和水洗后,可高效重复利用4次.综合表明,BiOCl/SiO_2/Fe_3O_4是一种在处理染料废水中具有应用前景的磁性光催化剂.