模糊综合评价法在钢铁企业安全投资合理性评价中的应用

为了对钢铁企业安全投资进行模糊综合评价,建立了钢铁企业安全投资的评价体系,确定各因素的权重。得出模糊综合评价矩阵,可对各因素进行评价分析;得出某钢铁企业安全投资现状分数为83.9分,等级为较好,需着重加强安全培训、劳保品、工业卫生等人因素方面的投资;在环境方面的投资较合理。     

青岛海洋环境碳纤维复合材料与低合金钢电偶腐蚀研究

目的 探究碳纤维复合材料在舰船应用时与金属材料的电偶腐蚀问题。方法 针对一种典型舰船用碳纤维增强乙烯基树脂复合材料,在青岛海洋大气环境下开展0.5、1、1.5、2 a期的自然曝晒试验,进而采用电化学分析手段考察其与低合金钢的电偶腐蚀效应,结合老化机制探究碳纤维复合材料的老化行为对其与钢电偶腐蚀的影响。结果及结论 在青岛大气环境曝晒不同周期的复合材料试样,开路电位与低合金钢相差较大,存在较高的电偶腐蚀倾向。随曝晒时间的延长,复合材料表面微裂纹不断产生、扩展,导致电化学反应活性点增多,两者电偶电流密度随之增大。在青岛海洋大气环境下暴露2 a后,碳纤维增强乙烯基树脂复合材料与低合金钢的电偶电流为0.356 9 μA/cm²,两者的电偶腐蚀敏感性达到B级。     

弹性滑移支座力学性能的试验研究

介绍了弹性滑移支座的原理、构造和特点;通过对其在不同工况下的性能试验,研究了竖向荷载、位移幅值以及加载频率对弹性滑移支座力学性能的影响,并给出了试验值与理论计算值之间的对比。研究结果表明:弹性滑移支座具有良好的工作性能,滞回曲线饱满,耗能能力强;竖向荷载和加载频率对弹性滑移支座的力学性能有一定的影响,而位移幅值对其影响较小;弹性滑移支座的恢复力模型,可以用考虑速度的指数摩擦力模型来描述,并且模拟得较为准确。     

Effect of Sweating on Insulation of Footwear

The study aimed to find out the influence of sweating on footwear insulation with a thermal foot model. Simultaneously, the influence of applied weight (35 kg), sock, and steel toe cap were studied. Water to 3 sweat glands was supplied with a pump at the rate of 10 g/hr in total. Four models of boots with steel toe caps were tested. The same models were manufactured also without steel toe. Sweating reduced footwear insulation 19–25% (30–37% in toes). During static conditions, only a minimal amount of sweat evaporated from boots. Weight affected sole insulation: Reduction depended on compressibility of sole material. The influence of steel toe varied with insulation. The method of thermal foot model appears to be a practical tool for footwear evaluation.     

超临界锅炉特种管材氧化皮结构特征及剥落规律

通过对超临界锅炉几种常用的铁素体钢及奥氏体钢高温换热管进行取样分析研究,得到了几种材质在运行中产生的氧化皮的结构特征和剥落规律。     

固相萃取-GC/MS法测定地表水中3-甲基吲哚

采用微球硅胶键合C_(18)固相萃取柱萃取水样中的3-甲基吲哚,并用气质联用法测定,方法在0 mg/L~10.0 mg/L范围内线性良好,方法检出限为0.2μg/L。空白水样3个质量浓度水平的加标回收率为89%~94%,7次测定结果的RSD为2.3%~6.9%。用该方法测定7个实际地表水样品,其中4个地表水样品检出3-甲基吲哚,地表水样的加标回收率为81.5%~97.0%。     

飞机起落架材料防护技术现状及研究进展

介绍了飞机起落架高强度钢的防护工艺及其防护特点。传统的防护工艺主要是镀铬和镀镉工艺,目前出现了无氰镀镉-钛、高速火焰喷涂(HVOF)涂层、低氢脆刷镀镉等新型防护工艺。通过对各新型防护工艺与传统工艺的工艺性能及耐腐蚀性能进行对比发现,各新型防护工艺都能很好地取代传统的防护工艺应用于飞机起落架的保护。     

Low-carbon transition of iron and steel industry in China: Carbon intensity, economic growth and policy intervention

As the biggest iron and steel producer in the world and one of the highest CO₂ emission sectors, China's iron and steel industry is undergoing a low-carbon transition accompanied by remarkable technological progress and investment adjustment, in response to the macroeconomic climate and policy intervention. Many drivers of the CO₂ emissions of the iron and steel industry have been explored, but the relationships between CO₂ abatement, investment and technological expenditure, and their connections with the economic growth and governmental policies in China, have not been conjointly and empirically examined. We proposed a concise conceptual model and an econometric model to investigate this crucial question. The results of regression, Granger causality test and impulse response analysis indicated that technological expenditure can significantly reduce CO₂ emissions, and that investment expansion showed a negative impact on CO₂ emission reduction. It was also argued with empirical evidence that a good economic situation favored CO₂ abatement in China's iron and steel industry, while achieving CO₂ emission reduction in this industrial sector did not necessarily threaten economic growth. This shed light on the dispute over balancing emission cutting and economic growth. Regarding the policy aspects, the year 2000 was found to be an important turning point for policy evolution and the development of the iron and steel industry in China. The subsequent command and control policies had a significant, positive effect on CO₂ abatement.     

气固两相流下球阀磨损特性研究

旋塞球阀是钻柱内防喷系统中的关键设备,在气固两相流下球阀易受磨损而失效,并造成严重的井喷事故。为此,将计算流体动力学理论与冲蚀磨损理论相结合,运用FLUENT软件对球阀壁面在气固两相流下的磨损分布情况进行研究,并进一步分析了球阀结构参数对于球阀壁面磨损的影响规律。结果表明:当气固两相流流经球阀时,固体颗粒会与气流分离,并在壁面上产生三处磨损集中区;随着球阀开度的减小,球阀壁面磨损量会急剧增大,且阀球内通道壁面上的磨损集中区由块状逐步转化为带状,而球阀出口处的磨损集中区则会逐渐向下移动;球阀流道直径的减小也会使得壁面磨损量增加,但磨损集中区的分布基本不变。研究结果可为进一步优化球阀流道结构以减轻其壁面磨损提供理论依据。     

京津冀地区钢铁行业高时空分辨率排放清单方法研究

针对目前京津冀地区钢铁行业大气污染物排放量基数不清,排放清单缺失的现状,以钢铁行业调研、企业在线监测、污染源调查等数据为基础,综合考虑钢铁行业具体工艺设备、环保措施、产能等信息,按照自下而上的方法建立了一套高时空分辨率排放清单.经计算,2012年京津冀地区钢铁企业排放SO2为47.16万t,NOx为37.22万t,烟粉尘为34.15万t,其中烧结和高炉工艺为京津冀钢铁行业污染物的主要来源;从空间分布来看,唐山、邯郸两地区集中了整个京津冀地区一半以上的钢铁企业,其污染物排放量占到了整个区域钢铁企业排放总量的一半以上.