Low-carbon transition of iron and steel industry in China: Carbon intensity, economic growth and policy intervention

As the biggest iron and steel producer in the world and one of the highest CO₂ emission sectors, China's iron and steel industry is undergoing a low-carbon transition accompanied by remarkable technological progress and investment adjustment, in response to the macroeconomic climate and policy intervention. Many drivers of the CO₂ emissions of the iron and steel industry have been explored, but the relationships between CO₂ abatement, investment and technological expenditure, and their connections with the economic growth and governmental policies in China, have not been conjointly and empirically examined. We proposed a concise conceptual model and an econometric model to investigate this crucial question. The results of regression, Granger causality test and impulse response analysis indicated that technological expenditure can significantly reduce CO₂ emissions, and that investment expansion showed a negative impact on CO₂ emission reduction. It was also argued with empirical evidence that a good economic situation favored CO₂ abatement in China's iron and steel industry, while achieving CO₂ emission reduction in this industrial sector did not necessarily threaten economic growth. This shed light on the dispute over balancing emission cutting and economic growth. Regarding the policy aspects, the year 2000 was found to be an important turning point for policy evolution and the development of the iron and steel industry in China. The subsequent command and control policies had a significant, positive effect on CO₂ abatement.     

黑色金属材料在长江淡水中的腐蚀行为

通过现场暴露试验,获得了2种碳钢、3种不锈钢及1种不锈钢与碳钢复合板材料在武汉长江淡水中的4年腐蚀试验结果,总结了它们的腐蚀行为。结果表明,Q235和16Mn碳钢在武汉长江中有较高的腐蚀率和明显的点蚀,稳定腐蚀率为0.055 mm/a;暴露4 a,奥氏体不锈钢304和316L没有明显腐蚀,而马氏体不锈钢430有较明显的点蚀和缝隙腐蚀;马氏体不锈钢0Cr13Ni5Mo与Q345C复合钢板在长江淡水中使用4 a后,0Cr13Ni5Mo发生严重的点蚀,说明马氏体不锈钢在淡水中的应用应慎重。     

Comparative study of microbial community structure in di erent filter media of constructed wetland

Comparisons of microbial community structure, in eight filter media of zeolites, anthracite, shale, vermiculite, ceramic filter media, gravel, steel slag and bio-ceramic, were undertaken by analyzing the phospholipid fatty acid (PLFA) composition. A total of 20 fatty acids in the range of C11 to C20 were determined but only 13 PLFAs were detected in steel slag. They consist of saturated fatty acids, branched fatty acids, monounsaturated fatty acids, and polyunsaturated fatty acids. The variation of fatty acids was revealed in the relative proportions of these fatty acids in di erent media. The aerobic prokaryotes were the predominant group in all media. The PLFA composition showed significant di erences among the eight di erent media by Tukey’s honestly test. It was found that steel slag was significantly di erent in the microbial community as compared to other filter media, probably due to its alkaline e uent. Steel slag alone is probably not a good choice of substratum in constructed wetlands. The principle components analysis (PCA) showed that zeolites, bio-ceramic, shale and vermiculite had a similar microbial community structure while steel slag and ceramic filter media were distinct from other media.     

A miniature stainless steel net dumbbell-shaped stir-bar for the extraction of phthalate esters in instant noodle and rice soup samples

Abstract

This work reports the development of a very-simple-to-construct stir-bar extraction device so called “a dumbbell-shaped stainless steel stir-bar.” The extraction device was assembled from a rolled up stainless steel net filled with an XAD-2 sorbent and a metal rod to allow the use of a magnetic stirrer during extraction. The dumbbell-shaped stainless steel stir-bar was used to extract diethyl phthalate (DEP), dibutyl phthalate (DBP), and di(2-ethylhexyl) phthalate (DEHP) before analysis by a gas chromatograph equipped with an electron capture detector (GD-ECD). Under the optimal conditions, the developed method provided a good linearity from 10.0 to 1,000.0?ng mL^?1 for all three compounds. Limits of detection and limits of quantification were 9.37?±?0.29?ng mL^?1 and 31.22?±?0.95?ng mL^?1 for DEP, 5.73?±?0.31?ng mL^?1 and 19.1?±?1.0?ng mL^?1 for DBP and 3.30?±?0.06?ng mL^?1 and 11.0?±?0.19?ng mL^?1 for DEHP, respectively. Good recoveries in the range of 81.89?±?0.17 to 109.5?±?2.0% were achieved when the method was used to extract phthalate esters in five instant noodle and two rice soup samples.     

用监测资料确定滑坡滑动面的新方法

研究表明，滑坡位移斜率与滑坡滑动面形状有密切关系。在本文，笔者根据位移斜率提出了一种确定滑坡滑动面的新方法。     

差厚贴合减振钢板成形性的数值模拟研究

采用有限元软件MSC.Marc基于更新拉格朗日的弹塑性本构方程,对减振钢板的拉深变形进行了数值模拟。模拟得出了变形过程中的应力应变状态和错动量分布。通过改变内外两层钢板的厚度比,分析了差厚贴合对减振钢板拉深变形错动量的影响。为减振钢板的设计和应用研究提供了可靠的理论依据。     

PCrNi3MoVA钢动态再结晶晶粒尺寸的影响因素

此文利用Formastor-Press热模拟试验机研究了Z参数、奥氏体起始晶粒尺寸D_0和应变ε对PCrNi3MoVA铜动态再结晶晶粒尺寸D_(dyn)的影响。通过对试验数据进行分析发现以下规律:①1nD_(dyn)=a+blnZ,②lnD_(dyn)=c+dlnD_0;③lnD_(dyn)=e+flnε 10％≤ε≤40％,其中a、b、c、d、e、f为不同的常数,据此,此文采用线性回归方法获得了上述这些常数的值。     

奥氏体不锈钢铸造管坯的热挤压试验研究

介绍了一种新的奥氏体不锈钢无缝管材制备工艺 ,即对空心铸坯直接热挤压制备荒管。通过对铸坯热挤压荒管的组织与性能的实验研究 ,表明新工艺可获得组织和性能均与传统工艺水平相当的不锈钢荒管 ,但工艺流程缩短 ,生产成本降低。     

大直径薄壁钢筒变薄旋压成形工艺研究

论述大径比高精钢筒变薄旋压成形试验过程 ,通过确定合理工艺过程 ,选择最佳工艺参数 ,从而旋出了合格筒体。结果表明 ,D40 6A钢退火状态变薄旋压性能良好 ,旋压塑性变形稳定 ;有效控制扩径量和壁厚差是变薄旋压成形和获取高精钢筒的关键     

汽车钢板胀形区成形极限图的预测与验证

通过对胀形区成形极限图的理论分析和经验修正,建立了胀形区成形极限图的计算公式,经试验验证,在不同钢种、不同退火工艺、不同镀锌方式、不同表面处理方式下,按此公式计算的结果都能很好地符合试验结果。