陶粒CANON反应器的接种启动与运行

通过CANON接种污泥,以人工配制无机高氨氮废水为对象,研究以陶粒为填料的CANON反应器启动与运行情况,结果表明:①陶粒可以作为CANON反应器合适填料,温度通过水浴控制在30℃±1℃,HRT为9 h、pH控制在7.00~8.08之间,经过60 d成功启动了CANON反应器,TN的去除负荷达到0.79 kg·(m3·d)-1;②在温度30℃时,陶粒CANON反应器中临界DO范围在1.12~1.69 mg·L-1之间,CANON反应器中短程硝化和厌氧氨氧化性能可维持稳定,高于此范围时,会出现CANON反应器中短程硝化不稳定现象;③在温度25℃,控制DO在1.01~1.54 mg·L-1之间时,尽管NO-3-N变化值与TN变化值的比值(δNO-3-N/δTN)略微偏离理论值0.127,为0.150~0.204,但CANON反应器脱氮性能趋于稳定,TN去除率最高为75.56%,TN的去除负荷最高达到0.97 kg·(m3·d)-1,这意味着CANON工艺的适宜温度范围至少可以降低至25℃.     

大渡河干海子滑坡稳定性研究

干海子滑坡位于大渡河流域,规模巨大.为研究该滑坡的稳定性,在对滑坡基本特征及变形破坏特征等深入研究的基础上,采用极限平衡法(Geo-slope软件)和有限差分法(FLAC-3D软件)对该滑坡的稳定性和应力应变特征进行了计算、模拟.稳定性计算模拟主要从深层、浅层及局部稳定三方面入手分析,计算模拟结果与滑坡的宏现地质现象均...     

极端冰雪条件下的顺层岩质边坡滑移稳定性分析

推导了典型岩石边坡在极端冰雪条件下的滑移稳定系数的表达式;通过计算分析,揭示了岩石边坡滑移稳定系数随裂隙内水深、坡高、坡角、滑面倾角等因素变化的规律及与冻深的关系,并绘制岩石边坡滑移稳定系数与边坡几何要素之间的关系图.研究表明,当考虑极端冰雪灾害影响时,岩石边坡滑移稳定系数发生较为明显的变化:随裂隙饱水程度、坡面角、主...     

开挖岩体边坡卸荷带宽度的计算方法

卸荷带的判别与计算,直接关系到岩体边坡的长期稳定性及致灾安全性.针对均质岩体边坡,采用弹性理论楔形体力学模型,提出了开挖岩体边坡力学模型,建立了开挖岩体边坡应力的计算方法;从开挖高度、开挖坡度、台阶宽度、岩体粘聚力、内摩擦角及岩体容重等方面,通过敏感性分析,探讨了开挖岩体边坡卸荷带宽度的变化规律,据此采用量纲分析法,建...     

某水电站进水口边坡变形特征及稳定性评价

某水电站是澜沧江中、下游梯级开发的关键工程,其进水口高边坡地质条件复杂。通过对该电站进水口边坡的物质组成、结构特征、以及边坡开挖等因素的综合分析研究,阐述了其变形机理,说明此高边坡存在如下变形破坏形式:①楔形体滑动破坏;②扩展式的平面型塌滑和滑移型崩塌破坏;③卸荷松弛变形破坏。采用三维块体分析和有限元数值模拟,分析了这类边坡在开挖过程中的应力变形特征及其变化规律。     

Thermal decomposition mechanism of 65% lysine sulfate powder and its thermal stability based on thermal analysis

Lysine is widely used in the fields of food, medicine and feed, which generally appears in the form of lysine sulfate or lysine hydrochloride dust because of the high instability of the free L-lysine. The L-lysine Sulfate is in high risk of decomposition, spontaneous ignition and even the dust explosion, because the control temperature in its production process is high up to 90 °C. Thus, the thermal behaviors and its thermal stability of 65% lysine sulfate are experimentally explored in Air and Nitrogen using the simultaneous TG-DSC measurements. Results show: (1) the decomposition of 65% lysine sulfate can be divided into three stages both in the atmospheres of air and nitrogen, and most of the weight loss occurred in the first two stages, which are related with the decarboxylation and deamination process. (2) The effects of atmosphere on the decomposition of 65% lysine sulfate mainly occur at the third stage. In this stage, the weight loss in nitrogen is only 14.2%, which is much lower than that in air (34.3%), which is related to the oxidative degradation at high temperature. Besides, the active energy is slightly increased in nitrogen compared to that in air. (3) The initial temperatures of the decomposition of the 65% lysine sulfate are 145 °C and 155 °C, for the air and nitrogen atmosphere, respectively, which are much lower than that (260 °C) of the pure lysine.     

Cancer and Non-Cancer Health Risk from Eating Cassava Grown in Some Mining Communities in Ghana

Food crops such as cassava, cocoyam and other tuber crops grown in mining communities uptake toxic or hazardous chemicals such as arsenic, and cadmium, from the soil. Cassava is a stable food for Ghanaians. This study evaluated human health risk from eating cassava grown in some mining communities in Ghana such as Bogoso, Prestea, Tarkwa and Tamso, which are important mining towns in the Western Region of Ghana. The study evaluated cancer and non-cancer health effects from eating cassava grown in the study areas in accordance with US Environmental Protection Agency’s Risk Assessment guidelines. The results of the study revealed the following: cancer health risk for Tamso, 0.098 (RME – Reasonable Maximum Exposure) and 0.082 (CTE – Central Tendency Exposure). This means that approximately 10 and 8 out of 100 resident adults are likely to suffer from cancer related cases by RME and CTE parameters respectively. For Prestea, we have 0.010 and 0.12, which also means that approximately 1 out of 100 and 10 resident adults out of 100 are also likely to suffer from cancer related diseases by RME and CTE parameters. The results of the study obtained were found to be above the acceptable cancer risk range of 1× 10⁻⁶ to 1× 10⁻⁴, i.e., 1 case of cancer out of 1 million or 100,000 people respectively.     

操作条件对超滤膜运行经济稳定性能的影响

采用正交实验的方法对棕榈油生产废水二级处理出水的超滤工艺条件进行考察和优化,并用膜通量衰减系数、平均跨膜压差及产水量各自加权相加所得综合指标来表征不同超滤操作条件下膜运行的经济稳定性能。正交试验结果表明,减小膜表面流速和产水率,提高处理废水温度均有利于系统经济稳定地运行;各运行参数对综合指标影响的大小顺序为:膜表面平均流速>产水率>温度;在保证出水质量的前提下,最佳组合操作条件为膜表面平均流速0.7m/s,产水率80%,废水温度30℃。     

美国AERMOD模型与中国大气导则推荐模型点源比较

介绍了美国AERMOD模型和中国大气导则推荐模型一般浓度公式,通过大气稳定度和扩散参数的确定、复杂地形处理和对流条件下污染物扩散等原理方面的比较认为,AERMOD模型优于大气导则推荐模型.以美国环境保护局(USEPA)2个试验场Clifty Creek(平坦地形)和Lovett(复杂地形)的数据资料为比较数据,分别用AERMOD模型和大气导则推荐模型计算SO₂小时质量浓度,在Pasquill 6类稳定度下用相对偏差(FB)、预测值与观测值的比率(RHC_R)及图形法(Q-Q图)等进行模型比较,结果表明:在RHC_R和FB中,AERMOD模型除个别值外,其他均好于大气导则推荐模型;而大气导则推荐模型存在接近或大于模型可靠性界限0.67(0.66和0.74),说明其可靠性比AERMOD模型差;图形法比较中,强不稳定和不稳定下AERMOD模型明显好于大气导则推荐模型,而大气导则推荐模型预测值明显偏低,其他稳定度下结果相差不大.研究认为:在平坦地形和复杂地形条件下,AERMOD模型点源预测值均优于大气导则推荐模型,并从原理上进行了解释.      

白泥复合衬层防渗稳定性的研究

为考察白泥复合防渗衬层的防渗稳定性和对污染物的阻滞去除能力,利用自制击实渗透仪对白泥和亚粘土防渗衬层进行了对比研究. 结果表明:白泥/亚粘土“夹层结构"复合衬层能保持低于国家防渗规范(10－7 cm/s)的防渗性,并对渗滤液中的重金属,COD_Cr和NH₄＋-N具有较强的阻滞去除能力,可以与常用的亚粘土防渗衬层相媲美,不过其淋滤出水ρ(Cl－)高,因此其长期防渗稳定性需进一步研究;60%白泥+40%亚粘土“混合式"复合衬层和白泥防渗衬层在渗滤液渗透作用下,其防渗性能不好,渗透系数超过国家防渗规范要求,因此不宜用于填埋场防渗.