某边坡地震工况下的稳定性数值模拟分析

地震是引起边坡失稳的重要因素之一,文章以怒江上游干流左岸一边坡为例,利用Flac3D软件对其在地震工况下的稳定性进行了数值模拟分析。通过对比得出:在天然工况下,边坡塑性区域分布范围较小且零星,剪应变增量和位移场分布均合理分布,边坡处于稳定状态;在地震工况下,塑性区域形成贯通面,剪应力增量集中分布在基岩与变形带分界面,并且位移大幅增加,此时边坡处于失稳破坏状态。文章对揭示边坡在地震作用下失稳机制提供有益参考。     

动载下高密度全尾砂胶结充填体稳定性试验研究

为研究动载下高密度全尾砂胶结充填体(HTB)的稳定性,制备直径为50 mm×25 mm的HTB试件,进行静态单轴压缩试验。首次采用分离式霍普金森杆(SHPB)装置研究HTB的动态力学性质,通过观察冲击试验后试件的破坏程度,来评判高应变率下试件的稳定性。结果表明:HTB试件波阻抗较小,对弹性应力波传播有较强的阻尼作用;在冲击载荷下,试件最大应变率可达305 s-1,动态抗压强度随着应变率的增加而增大,最大动态抗压强度为17 MPa;HTB试件的稳定性与应变率密切相关,当应变率低于10 s-1时,试件稳定性较好;当应变率为10~39 s-1时,试件产生一定的损伤裂纹,但尚有一定的残余强度;当应变率大于39 s-1时,试件完全失稳。     

Land use dynamics and soil quality in agro-forest systems: a country-scale assessment in Italy

The present study compares the spatial distribution of selected rural land use classes in Italy with two soil indicators (a Soil Quality Index [SQI] and the Maximum potential Water Capacity of the soil [MWC]) at three points in time (1960, 1990 and 2006). Results of the analysis showed that landscape changes reflect a ‘migration’ of both semi-natural (forests, pastures) and agricultural (arable land, vineyards) uses towards areas with lower-quality soils. In particular, the agricultural ‘mosaic’ and shrubland-pasture classes that occupied land in 2006 had significant lower values of both the SQI and MWC compared to 1960. These processes may have implications for the stability of agro-forest ecosystems in the medium term. Due to its versatility, the procedure illustrated represents a monitoring tool for sustainable land management at the regional and country scales.     

Selecting the Best Compatible SVC Type in Power Systems for transient Stability

Considering the increased trend to use renewable energy to meet electrical energy demands, a reliable performance also should be adopted in transmitting the generated power through the stable transmission and subtransmission systems for which nowadays Flexible AC Transmission System (FACTS) controllers are used extensively. Transient stability is one of the most important issues in power system stability analysis. FACTS devices have confirmed their capabilities in various aspects in power networks. In this paper, to improve transient stability of power systems, a shunt connected FACTS devices have been introduced, i.e., Static VAR compensators (SVCs). The SVC has the most diversified branches among FACTS devices. The main aim of this work is to study and analyze the impact of eight branches of SVC on improvement of transient stability and to choose the best of them. Simulations are performed in MATLAB/SIMULINK environment.     

Stability and deformation of surrounding rock in pillarless gob-side entry retaining

We analyzed the stability of the retained gob-side entry in four different Chinese coal mining sites and evaluated the influencing factors of roadway deformation such as mining depth, support strength and area of gob-side hanging roof. It was found that the length of cantilever roof block above roadway has a major impact on the deformation, whereas the impact of mining depth is minor if the depth is less than 500 m. Minimum support resistance of 0.3 MPa is essential to effectively confine the deformation of a retained roadway. We performed physical experiments to further study the features of roof fracturing and their impact on roadway deformation under three typical immediate roof conditions, i.e., thick-immediate roof, thin-immediate roof and non-immediate roof. In addition, equations to calculate desired support resistance of filled gob-side wall were derived based on superimposed continuous laminate model. The results provide valuable theoretical and practical guidance for implementing pillarless gob-side entry retaining in engineering practices.     

Demographic Stability Metrics for Conservation Prioritization of Isolated Populations

Abstract:  Systems of geographically isolated habitat patches house species that occur naturally as small, disjunct populations. Many of these species are of conservation concern, particularly under the interacting influences of isolation and rapid global change. One potential conservation strategy is to prioritize the populations most likely to persist through change and act as sources for future recolonization of less stable localities. We propose an approach to classify long-term population stability (and, presumably, future persistence potential) with composite demographic metrics derived from standard population-genetic data. Stability metrics can be related to simple habitat measures for a straightforward method of classifying localities to inform conservation management. We tested these ideas in a system of isolated desert headwater streams with mitochondrial sequence data from 16 populations of a flightless aquatic insect. Populations exhibited a wide range of stability scores, which were significantly predicted by dry-season aquatic habitat size. This preliminary test suggests strong potential for our proposed method of classifying isolated populations according to persistence potential. The approach is complementary to existing methods for prioritizing local habitats according to diversity patterns and should be tested further in other systems and with additional loci to inform composite demographic stability scores.     

Impacts of climate change on lakes and reservoirs dynamics and restoration policies

Meteorological-driven processes exert large and diverse impacts on lakes and their water quality; these impacts can be hydrologic, thermal, hydraulic, chemical, biochemical, or ecological. The impact of climate change on Lake Tahoe (California–Nevada) was investigated here as a case study of climate change effects on the physical processes occurring within lakes. The already published trends of meteorological variables were used to assess the effects of global warming on Lake Tahoe dynamics. Records from the period 1969–2002 show that Lake Tahoe has became warmer and more stable. A series of simulation years into the future (i.e., 2000–2040) was established using flows, loads, and meteorology data sets for the period 1994–2004. Results of 40-year simulations show that the lake continues to become warmer and more stable, and mixing is reduced. Possible changes in water quality because of global warming are discussed through inference, although these are not specifically simulated. Many existing problems may be exacerbated due to climate change, yet extreme uncertainty depends on the rate and magnitude of climate change. Therefore, shifts in water quality and quantity due to climate change should be integrated into contemporary planning and management in an adaptive manner, and the research and development of impact assessment methodology should focus on approaches that can handle extreme uncertainty. The general alternatives for lake management due to climate change are discussed. Depending on the specific case, further intensive research is suggested to restore lake water quality.     

Robust prediction of chatter stability in milling based on the analytical chatter stability

A major obstacle that limits the productivity in machining operations is the presence of machine tool chatter. Machining is a dynamic process and chatter behavior depends upon a number of different aspects including spindle speeds, material properties, tool geometry, and even the location of tool respect to the rest of machine. Many of the traditional models used to predict chatter stability lobes assume that parameters such as natural frequency, stiffness, and cutting coefficients remain constant. In reality, these parameters vary and they affect the chatter stability. The uncertainty in these parameters can be taken into consideration by employing the robust stability theory into a two degree of freedom milling model. Utilizing the Edge theorem and the Zero Exclusion condition, a robust chatter stability model, based on the analytical chatter stability milling model, is developed. This improves the reliability compared to the projected pseudo single degree of freedom model. The method is verified experimentally for milling operations while considering a changing natural frequency and cutting coefficient.     

工业生态系统类型及稳定性的相关性探讨

在分析了工业生态系统及其稳定性涵义的基础上，结合实例把工业生态系统分为3种类型：星式工业生态系统、放射式工业生态系统和点式工业生态系统，从多方面探讨了各种类型工业生态系统的特征，并分析了工业生态系统类型与稳定的相关性，有针对性地提出提高各类型工业生态系统稳定性的对策。     

Adsorption,desorption, soil mobility,aqueous persistence and octanol‐water partitioning coefficients of terbufos,terbufos sulfoxide and terbufos sulfone

Abstract

Terbufos, t. sulfoxide and t. sulfone (5 μg ml^‐1) were incubated in natural, sterilized natural and distilled water, with initial pH values of 8.8, 8.8 and 6.0, respectively, at 20°C. First‐order disappearance was observed for the three compounds. Rates in natural and sterilized water were similar indicating chemical degradation predominated. Terbufos disappeared rapidly (t½>=3 days) in all systems. T. sulfoxide and t. sulfone were more persistent in the natural (t½>=18–40 days) and distilled water (t½>=280–350 days). Adsorption data for the three compounds in four soil‐water systems showed the decreasing order of adsorption to be terbufos>>t. sulfoxide=t. sulfone. Desorption from soils fortified at 5 μg g^‐1 with water was examined for 4 successive 18‐hr cycles. T. sulfoxide and t. sulfone were totally desorbed; terbufos was too unstable to study. The mobility of the compound in soil eluted with water was in the order, t. sulfoxide=t. sulfone>> terbufos, in agreement with adsorption‐desorption results. The octanol‐water partitioning coefficients for terbufos, t. sulfoxide and t. sulfone, at 23°C, were 3:30 x 10 , 164, and 302, respectively.