成都市污染边界层高度的演变特征分析

基于2014年1月21日至2月5日成都市人民南路四段逐时PM_(2.5)质量浓度、大气能见度资料以及同期Mie散射激光雷达探测数据,遵循消光系数与细颗粒物质量浓度之间的关系,探讨污染边界层高度的演变特征。结果表明:污染时段内的污染边界层高度偏低,平均为221m;污染边界层高度与地面PM_(2.5)浓度的变化具有明显相关性,但污染边界层高度改变在前,地面PM_(2.5)浓度响应在后;污染边界层高度的日变化表现为单峰单谷型,峰值和谷值分别出现在08:00时和14:00时前后。     

淋滤技术去除剩余污泥重金属研究进展

微生物淋滤能够去除剩余污泥中的重金属,并具有成本低、效率高和改善污泥脱水性能等优点,在国内外得到广泛关注。生物淋滤法在硫杆菌等微生物的作用下,将污泥中难溶的金属硫化物氧化成金属硫酸盐溶出;而厌氧酸化淋滤作为新技术,在厌氧酸化阶段通过质子交换和非离子态金属盐溶解使重金属浸出释放,相较于微生物淋滤法无需外加药剂和前处理,具有发展潜力。对包括生物淋滤和厌氧酸化淋滤在内的国内外相关研究进行了归纳,重点介绍了污泥中重金属的存在形态,两种工艺的去除机理以及环境因素对各自淋滤效果的影响,并对淋滤技术在环境污染治理方面的应用前景进行了展望。     

不同絮凝剂对活性污泥特性及除污效能的影响研究

为了研究絮凝剂对污泥特性及除污效能的作用结果,考察了SBR反应器中投加聚合氯化铝(PAC)、聚合硫酸铁(PFS)和阳离子聚丙烯酰胺(CPAM)对污泥特性及COD、NH_4~+-N和TP去除效果的影响。结果表明:投加10 mg/L PAC会导致活性污泥沉降性能变差,降低了微生物对污染物质的分解能力;投加0.1 mg/L CPAM和10 mg/L PFS能够改善活性污泥菌胶团和絮体结构,使得活性污泥的吸附效能和沉降性增强。     

浸没燃烧技术处理高浓度有机废水研究

针对现阶段高浓度有机废水处理困难的问题,提出了一种基于浸没燃烧技术的处理方法,设计制作了1台浸没燃烧装置,并开展了高浓度有机废水浸没燃烧实验研究,探究了过量空气系数、二次风量、燃烧温度等参数对燃烧尾气中CO、NOx排放的影响,以及浸没深度、燃烧温度对高浓度有机废水COD去除的影响。实验结果表明:该工艺对高浓度有机废水中的有机物去除效果明显,温度在900℃以上,浸没深度达到20 cm时,COD去除率可达90%以上。该方法可作为废水处理设备,与生物法等处理技术联用,应用前景广阔。     

Phosphorus recovery from municipal and fertilizer wastewater: China's potential and perspective

Phosphorus (P) is a limited resource, which can neither be synthesized nor substituted in its essential functions as nutrient. Currently explored and economically feasible global reserves may be depleted within generations. China is the largest phosphate fertilizer producing and consuming country in the world. China''s municipal wastewater contains up to 293,163 Mg year of phosphorus, which equals approximately 5.5% of the chemical fertilizer phosphorus consumed in China. Phosphorus in wastewater can be seen not only as a source of pollution to be reduced, but also as a limited resource to be recovered. Based upon existing phosphorus-recovery technologies and the current wastewater infrastructure in China, three options for phosphorus recovery from sewage sludge, sludge ash and the fertilizer industry were analyzed according to the specific conditions in China.     

Effects of sludge retention time, carbon and initial biomass concentrations on selection process: From activated sludge to polyhydroxyalkanoate accumulating cultures

Four sequence batch reactors (SBRs) fed by fermented sugar cane wastewater were continuously operated under the aerobic dynamic feeding (ADF) mode with different configurations of sludge retention time (SRT), carbon and initial biomass concentrations to enrich polyhydroxyalkanoate (PHA) accumulating mixed microbial cultures (MMCs) from municipal activated sludge. The stability of SBRs was investigated besides the enrichment performance. The microbial community structures of the enriched MMCs were analyzed using terminal restriction fragment length polymorphism (T-RFLP). The optimum operating conditions for the enrichment process were: SRT of 5 days, carbon concentration of 2.52 g COD/L and initial biomass concentration of 3.65 g/L. The best enrichment performance in terms of both operating stability and PHA storage ability of enriched cultures (with the maximum PHA content and PHA storage yield (Y_PHA/S) of 61.26% and 0.68 mg COD/mg COD, respectively) was achieved under this condition. Effects of the SRT, carbon concentration and initial biomass concentration on the PHA accumulating MMCs selection process were discussed respectively. A new model including the segmentation of the enrichment process and the effects of SRT on each phase was proposed.     

Amoxicillin effects on functional microbial community and spread of antibiotic resistance genes in amoxicillin manufacture wastewater treatment system

This study aimed to reveal how amoxicillin(AMX) affected the microbial community and the spread mechanism of antibiotic resistance genes(ARGs) in the AMX manufacture wastewater treatment system. For this purpose, a 1.47 L expanded granular sludge bed(EGSB) reactor was designed and run for 241 days treating artificial AMX manufacture wastewater. 454 pyrosequencing was applied to analyze functional microorganisms in the system. The antibiotic genes OXA_(-1), OXA_(-2), OXA_(-10), TEM_(-1), CTX-M_(-1), class I integrons(intI1) and 16 SrRNA genes were also examined in sludge samples. The results showed that the genera Ignavibacterium, Phocoenobacter,Spirochaeta, Aminobacterium and Cloacibacillus contributed to the degradation of different organic compounds(such as various sugars and amines). And the relative quantification of eachβ-lactam resistance gene in the study was changed with the increasing of AMX concentration.Furthermore the vertical gene transfer was the main driver for the spread of ARGs rather than horizontal transfer pathways in the system.     

流体剪切与超声空化破解剩余污泥的参数优化

为提高剩余污泥的破解效果并降低能耗,采用FS（fluid shear,流体剪切）、UC（ultrasonic cavitation,超声空化）、FS和UC联合工艺（FS-UC,UC-FS）破解剩余污泥,并应用单因素试验结合响应面法对联合工艺进行优化.结果表明:FS对剩余污泥破解效果一般,只在开始阶段具有较好效果,随作用时间延长,破解效果未有显著提高甚至下降.UC对剩余污泥破解效果明显,随作用时间延长,破解效果显著提升,但能耗也随之增大,EDR（energy disintegration ratio,效能比）明显下降.相同作用时间下,UC破解效果优于FS破解效果,UC破解剩余污泥的DD_COD（degree of disintegration,破解率）与EDR均明显高于FS方法.单因素试验得出的较优FS作用时间范围为2~8 min,较优UC作用时间范围为5~15 min.响应面法试验结果显示,联合工艺的剩余污泥破解效果和能量利用率均优于单一方法,联合工艺中FS-UC工艺的破解效果优于UC-FS工艺.FS-UC工艺的最佳参数:FS处理5.6 min再UC处理15.0 min,该条件下剩余污泥实际DD_COD为50.8%,EDR为26.8%.UC-FS工艺的最佳参数:先UC作用15.0 min再FS作用7.8 min,该条件下剩余污泥实际DD_COD为36.5%,EDR为17.1%.研究显示,以DD_COD和EDR为指标,4种工艺的高效性顺序为FS-UC > UC-FS > UC > FS,其中FS-UC工艺具有能耗低、破解效率高的特点,是4种工艺中剩余污泥破解效果最好的一种工艺.      

高效酶促进剂Accell在养猪废水处理工艺中的应用研究

为了考察高效酶促进剂在养猪废水处理工艺中的功能,在养猪废水治理工艺的生化段SBR反应器进水中投加高效酶促进剂Accell.两套相同的装置平行运行的效果对比表明:投加Accell可减少剩余污泥的排放量,增加溶氧效率,强化污染物的去除效果;投加高效酶的装置对COD的去除可在SBR反应器基础上再减少40%以上,对NH3-N的去除可进一步再减少25%以上,对P的去除也有一定的促进作用.     

外源Ca2+对SBR启动期活性污泥胞外多聚物的动态影响

利用无机物如Ca~(2+),加快活性污泥反应器启动,强化活性污泥絮体性能和结构稳定性,受到越来越多的重视.采用序批式反应器,研究进水中添加Ca~(2+)对反应器启动期活性污泥沉降性能和胞外多聚物的影响.结果表明运行至28 d,与进水中不添加Ca~(2+)的反应器(对照反应器)相比,进水中添加150 mg·L~(-1)外源Ca~(2+)的反应器中活性污泥MLSS和MLVSS值分别高出了89.6%和75.6%,SVI值则降低了47.9%;活性污泥胞外多聚物总量增加了76.4%,多糖增加了28.8%,蛋白质减少了31.6%,添加150 mg·L~(-1)外源Ca~(2+)的反应器中污泥胞外多聚物中多糖/蛋白质值为68.8,对照反应器的活性污泥胞外多聚物多糖/蛋白质值仅为36.6.三维荧光光谱和红外光谱分析表明外源Ca~(2+)导致活性污泥胞外多聚物组分发生了变化.实验结果为进水中添加外源Ca~(2+)改善活性污泥沉降性能提供了基础数据.