城市污水处理厂除臭技术

介绍了城市污水处理厂臭气来源、成分及产量。针对目前国内外除臭技术的研究和发展情况，分析了污水处理厂的各种物理、化学和生物除臭方法的技术原理、优缺点和应用现状。结合日本城市污水处理厂的运行实际，重点介绍了一种不产生臭气的新技术——腐殖活性污泥法的工艺流程、特点及其应用现状。     

复杂地形空气污染预报模式的研究

本文依据一个同时包括地形、热力以及摩擦等因素在内的，能够较真实地反映复杂地形情况下，大气运动基本特征的近地层水平流场二维数值模式，将其扩展成三维模式。在此基础上，从平流扩散方程出发，建立了一个与上述流场相应的浓度场预报模式。经与实测值比较，该预报模式具有较好的可靠性和适用性     

污泥与高浓度有机废物厌氧消化反应中的产气量

研究了高温／中温两相厌氧消化反应器系用以同时处理污泥与不同高浓度有机废物时产气及产甲烷的变化特性。结果表明，气体及甲烷主要是在第二段的中温消化反应器内产生。当中温消化反应器的有机负荷ＶＳ为１．６５￣３．１０ｋｇ／ｍ＾３ｄ时，稳态条件下的平均产气量为１．９５８￣４．０２０ｍ＾３／ｄ，气体中甲烷的平均组成为６５％￣７３％，甲烷的比产率为０．３９７￣０．５１１ｍ＾３／ｋｇＶＳ。     

高速微涡活性污泥法提高氧利用效率的研究

概述了高速微涡活性污泥法的工艺特点，并对该法提高氧的转移及利用效率进行了研究和机理分析。     

Relation between extracellular polymers' composition and its ability to complex Cd,Cu and Pb

Activated sludges originated from wastewater treatment plants (WWTPs) play an important role in heavy metal removal from effluents. Extracellular polymers (ECP) form a major part of the activated sludge and are heavily involved in biosorption of heavy metals. The complexation of three heavy metals (Cd, Cu and Pb) with ECP extracted from six activated sludges, originated from different WWTPs, was investigated at pH 7.

ECP in the study were shown to be mainly composed of proteins, humic acids, uronic acids and polysaccharides along with smaller amounts of lipids and nucleic acids. IR spectra confirmed the presence of the functional groups usually found in the ECP and the content in each fraction was determined using colorimetric methods. The determination of surface charge was carried out on each ECP sample and allowed two pK_a values characteristic of two distinctive functional groups to be determined. At the pH used in the study, the value of these constants indicates that only one functional group is under protonated form.

A polarographic method was used to determine the complexation parameters (number of binding sites and complexation constant) of ECP solutions towards metals. The following orders were established for the number of binding sites: Cu > Pb  Cd and for the stability of the ECP–metal complex: Cd > Pb  Cu.

A matrix of correlation between the composition of the polymers and the complexation parameters showed that the number of binding sites and the complexation constant were strongly linked to proteins, polysaccharides and humic substances content.     

湿式氧化技术及其应用比较

对湿式氧化技术及其影响因素进行了介绍 ,叙述了各种因素的影响作用并对各因素的影响强弱进行了比较 ,认为反应温度和处理对象的性质是影响湿式氧化技术处理效果的关键因素。阐述了湿式氧化技术在废水处理、污泥处理、活性炭再生中的一些应用研究情况 ,并进行了比较。总结了湿式氧化技术的特点及其在环境治理中的优势     

一体化间歇曝气完全混合活性污泥法

一体化间歇曝气完全混合活性污泥法处理装置采取特殊的沉淀区构造,改变了活性污泥的循环流动方式,通过间歇曝气,反应区交替处于好氧/缺氧状态,达到了有机物高效去除、高效硝化反硝化及控制污泥膨胀的效果.该方法具有出水水质好、运行稳定、能耗低、流程简洁和操作管理方便的特点,是一种很有发展潜力的一体化中小型生活污水、城市污水处理系统.     

柱生物曝气法吸附处理含铬废水

利用复合生物吸附剂FY01与活性污泥作为吸附材料，探讨了柱式生物曝气法对高浓度含铬电镀废水的生物吸附效果。研究结果表明，FY01性能稳定，耐进水pH冲击能力较强。当进水pH=2—5、流速为500mL／h时，10gFY01和5g活性污泥联合处理60．4mg／L含铬电镀废水2h后，铬的去除率达78％以上；在4℃冰箱和23—28℃实验室保存50d的FY01对铬的去除分别在78％～83％和77％-84％之间。柱式生物曝气吸附法对含铬废水的处理效果理想，运行稳定。串联处理2000mL总Cr、Cu^2＋和COD浓度分别为60．4、4．51和48．2mg／L的电镀废水2h后，去除率分别高达92．1％、99．2％和71．4％。     

Intra- and inter- laboratory variability in paper industry PCDD/PCDF analysis

Studies were conducted to quantify variability for pulp industry wastewater effluent, pulp and sludge analyses. Intralaboratory variability studies indicated that there is a potential for greater between batch variability in results than for within a batch. Intralaboratory relative standard deviations for replicate analyses ranged from 6% to 60%. Interlaboratory studies, using standard reference materials showed relative standard deviations from 4% to 135%. There appeared to be little dependance of variability on concentration, suggesting matrix effects were very important. In general, effluent variability was greater than observed for pulps or sludges. Analysis of reference standards indicated that 13% to 17% variability can be attributed to differences in calibration standards. A limited study of full congener PCDD/PCDF analysis variability showed it to be greater than observed for TCDD/TCDF.     

接种厌氧消化污泥EGSB反应器的快速启动

对接种市政消化污泥的EGSB反应器的启动进行实验研究以寻求快速启动EGSB反应器的有效方法。接种厌氧消化污泥EGSB反应器的成功启动仅需要46d。在整个启动期保持适当的液体上升流速是非常重要的。启动初期，高液体上升流速能够将悬浮污泥冲出反应器，使适合聚集的微生物留在反应器内。接下来需要降低进水流量和液体上升流速以利于构建稳定的微生态系统，使高活性颗粒污泥尽快形成。然后适当提高液体上升流速能保持污水与微生物的良好接触，促进颗粒污泥内外高效传质，形成更加稳定高效的微生物群落结构。为尽快形成高活性颗粒污泥，保证产甲烷菌的最佳营养需求是关键，可通过考虑进水基质、微量营养元素和硫化物来提高其活性。