A comparative study of vocational education and occupational safety and health training in China and the UK

In order to enhance Chinese workers’ occupational safety awareness, it is essential to learn from developed countries’ experiences. This article investigates thoroughly occupational safety and health (OSH) in China and the UK; moreover, the article performs a comparison of Chinese and British OSH training-related laws, regulations and education system. The following conclusions are drawn: China’s work safety continues to improve, but there is still a large gap compared with the UK. In China a relatively complete vocational education and training (VET) system has been established. However, there exist some defects in OSH. In the UK, the employer will not only pay attention to employees’ physiological health, but also to their mental health. The UK’s VET is characterized by classification and grading management, which helps integrate OSH into the whole education system. China can learn from the UK in the development of policies, VET and OSH training.     

Usability of non-standard lower anchor configurations for child restraint system (CRS) installation

Abstract

Objectives: The objective of this study was to determine whether the amount of tension required for proper child restraint system (CRS) installation varies with lower anchor spacing and to determine whether nonexperts can produce adequate tension on wider-than-standard lower anchor configurations.

Methods: CRSs were installed by certified child passenger safety technicians (CPSTs; n?=?6 subjects, n?=?72 installations) and nonexperts (n?=?30 subjects, n?=?120 installations) on a mock-up vehicle seat fixture with lower anchors set at 11 (standard), 15, 19, and 23 in. apart from one another. Each CPST installed a rear-facing (RF) infant base, RF convertible, and forward-facing (FF) convertible into each of the 4 spacing configurations in random order. The CPSTs were instructed to tighten the lower connector strap until the tension was exactly at the threshold between passing and failing the 1-in. test. Each nonexpert installed one CRS model into all 4 spacing conditions in random order. Nonexperts were instructed to install the CRS to the best of their ability. The tension produced on the lower connector strap was recorded via load cell in the lower anchor assembly of the vehicle seat. Resultant tension magnitudes were compared across spacing conditions using matched pair t-tests. The CPSTs’ mean 1-in. test threshold values were compared to tensions produced by nonexperts. Installations were visually evaluated for errors and qualitative usability feedback was collected via survey.

Results: CPSTs installed the infant base with higher tensions in the 15-, 19-, and 23-in. configurations compared to the standard 11-in. configuration (P = .034, .032, and .003, respectively). The nonexperts installed the infant base with higher tension in the 15- and 23-in. configurations compared to the 11-in. configuration (P = .004 and .026, respectively). The RF convertible and FF convertible installations showed no significant differences in tension among any of the spacing configurations for either group. Only 19% of the nonexperts’ installations were tight enough to pass CPST thresholds, and the pass rate did not vary with respect to lower anchor spacing. In feedback surveys, the nonexpert group did not show a consistent preference for either standard or wider-than-standard lower anchor configurations.

Conclusions: The amount of tension required to pass the 1-in. rule did not vary with lower anchor spacing configurations for the RF and FF convertible CRS, but the infant base required more tension in wider anchor configurations. Nonexperts tended to produce less than ideal tension in all configurations, although their tension magnitudes increased for the infant base in wider configurations.     

录井系统雷击危害分析及模拟试验研究

针对雷击电磁辐射对录井系统的危害问题,建立了录井系统线路雷击危害模拟试验模型,采用8/20 μs冲击电流发生器,开展了录井系统的雷击耦合试验,定量分析了雷击电磁辐射对录井系统的影响。研究结果表明:随着电流的增大和距离电流通道的减小,耦合的电压随之增大;线缆长度越长耦合的电压越大,最大耦合电压达到了2 720 V;屏蔽层接地可以有效地减小电磁辐射对线缆的耦合作用。     

江苏省太湖流域水生态健康评估的初步实践及展望

阐述了水生态健康的内涵与意义,从江苏省率先在太湖流域开展水生态环境功能分区管理的顶层设计,构建以水生态健康指标为核心的水生态健康评估技术体系,地方对照水生态环境功能区划的水生态分级管控目标开展的应用与实践结果等3个方面,回顾了江苏省太湖流域水生态健康评估工作的主要进展,提出了完善水生态健康评估技术体系和推进流域水生态健康评估工作的建议。     

Carbon trading thickness and market efficiency in a socialist market economy

Unlike the European Union emission trade system (EU ETS), China’s pilot ETSs implemented diversified policy designs instead of using a uniform framework. Variance ratio test is used to evaluate the Efficient Market Hypothesis (EMH) in China’s carbon trading markets. The results of two versions of variance ratio tests indicate that the carbon trading market in Hubei is considered weak form efficient, and the socialist market economy does not necessarily lead to market inefficiency in carbon trading markets. Thin trading activities generate market frictions and bias the Efficient Market Hypothesis (EMH) tests.     

基于变权灰色云模型的江苏省水环境系统脆弱性评价

水环境系统脆弱性是水资源利用与生态环境研究的热点问题,通过研究水环境系统的内在机理,综合考虑影响水环境系统脆弱性的资源、环境、经济、社会等因素,借助驱动力-压力-状态-影响-响应-管理（DPSIRM）框架构建水环境系统脆弱性评价指标体系。在此基础上,构建基于变权灰色云模型的评价方法,对2004~2014年江苏省水环境系统脆弱性进行评价。结果表明：2004~2014年水环境系统脆弱性指数由47.056提高到63.210,脆弱性等级由“重度脆弱”演化为“中度脆弱”,并长期维持在“中度脆弱的”等级,2014年出现了向“轻度脆弱”状态转变的趋势。分析各个子系统对水环境系统脆弱性影响程度可知,影响子系统和响应子系统对江苏省水环境脆弱性系统的影响程度逐年增加;而压力子系统和管理子系统对水环境系统脆弱性的影响程度逐年下降;其它子系统对水环境系统脆弱性的影响维持在一定水平小幅度波动。     

环境监测点位“组合校验码”编码模型及编码管理系统设计

分析了环境监测点位编码管理中存在的问题,提出科学合理的编码应该是具有科学性、唯一性、稳定性、简明性、规范性、可扩展性等特点。设计了一种简单"组合校验码"模型来适应不同环境要素类型的环境监测工作需要。同时,设计了一套覆盖各层级环境监测机构,各种环境要素类型,适应市场化监测服务,满足不同点位管控类别的编码管理系统来支撑"组合校验码"模型的使用,通过该系统可以有效解决环境监测数据集成程度低、共享困难等问题。     

空气质量多模式预报系统在中山市的应用

介绍了中山市空气质量多模式预报系统。对2015年3月—2016年2月的预报效果评估表明:系统可以较好地反映污染物的变化趋势但仍存在系统性偏差。通过对排放源清单的调整优化及对模式干沉降模块的改进使模式系统的偏差显著减小。总结并建立中山市污染天气案例库,发现在典型污染天气形势下,除O3-8 h外,其他污染物均值均能达到空气质量二级标准。未来将从2个方面提高中山市空气质量预报预警系统的实用性,包括逐步实现污染源排放清单的动态及时更新和提高极端气象条件下O3污染预报能力。     

固定源排污许可证监测管理制度研究

依靠排污许可证管理,固定源执行由行业排放标准为主正逐步过渡到"国家行业排放标准——单一源排放标准"双层排放标准,并以执行更全面和精准的单一源排放标准为主,对应的监测要求及考核方式更加多样化。对监测管理制度进行设计,明确固定源制定自行监测方案和守法监测的主体责任,厘清许可证核发部门、属地监测、执法部门的监管职责。系统设计"固定源制定并提交自行监测方案-核发部门审核-方案纳入排污许可证中成为规定-依规定自行监测和记录-固定源提交执行报告-监管部门审计式审核-执法监测和执法检查"的全过程管理机制,设计标准化的监管计划程序落实证后监管与执法监测,明晰监管部门的有限责任。     

我国污染物总量控制制度改革的思考

污染物总量控制制度是我国环境保护制度的重要组成部分。结合污染物总量控制制度的实施现状,分析实施过程中减排基数、核算体系、责任主体等方面存在的问题。提出,改革现行污染物总量控制制度,将总量控制与改革中的排污许可制相融合,落实企业主体责任,将总量指标与环境质量改善挂钩,建立差异化的减排核算体系,并加强日常监管,达到改善环境质量的目标。