Carbon Dioxide Balance of Wood Substitution: Comparing Concrete- and Wood-Framed Buildings

In this study a method is suggested to compare the net carbon dioxide (CO₂) emission from the construction of concrete- and wood-framed buildings. The method is then applied to two buildings in Sweden and Finland constructed with wood frames, compared with functionally equivalent buildings constructed with concrete frames. Carbon accounting includes: emissions due to fossil fuel use in the production of building materials; the replacement of fossil fuels by biomass residues from logging, wood processing, construction and demolition; carbon stock changes in forests and buildings; and cement process reactions. The results show that wood-framed construction requires less energy, and emits less CO₂ to the atmosphere, than concrete-framed construction. The lifecycle emission difference between the wood- and concrete-framed buildings ranges from 30 to 130 kg C per m² of floor area. Hence, a net reduction of CO₂ emission can be obtained by increasing the proportion of wood-based building materials, relative to concrete materials. The benefits would be greatest if the biomass residues resulting from the production of the wood building materials were fully used in energy supply systems. The carbon mitigation efficiency, expressed in terms of biomass used per unit of reduced carbon emission, is considerably better if the wood is used to replace concrete building material than if the wood is used directly as biofuel.     

On-line optical determination of floc size of Fe(Ⅲ) coagulants

This study investigated the floc aggregation, average floc size, floc size variance and floc growth velocity when ferric chloride （FeCl3） and polyferric chloride （PFC） were used to treat the simulated water samples. The factors including coagulant dose, ionic strength and solution pH, which affect the floc aggregation, were studied. Experiments were carried out in a bench-scale reactor using photometric dispersion analyzer （ PDA）. Results showed that there were great differences between the floc aggregation of PFC and FeCl3. The average floc size and fioc growth velocity of PFC were much larger than those of FeCl3. Compared with FeCl3, PFC gave a better coagulation performance in wider range of pH, dosage and ionic strength. It was also found that the coagulation efficiency of PFC did not depend on average floc size but on floc growth velocity.     

Sorption of pyrene on two paddy soils and their particle-size fractions

In the present study, the sorption of pyrene on two kinds of bulk paddy soils, Gleyic Stagnic Anthrosols, and Ferric accumulic Stagnic Anthrosols as well as their particle-size fractions was investigated. The sorption isotherms fitted well with Freundlich equation. For both soils, the clay fraction（ 〈 2μm） and coarse sand fraction（2000-250μm） had higher sorption capacity than fine sand fraction（250-20 μm） and silt fraction（20-2 μm）. The IogKoc values obtained of each soil and its particle-size fractions were similar, proving that SOM content was a key factor affecting pyrene sorption. The Kd values showed a significant correlation with contents of dithionite-extractable Fe in both paddy soils and a good relationship with CEC in Gleyic Stagnic Anthrosols, indicating possible effects of surface properties of particle-size fractions on the sorption of pyrene.     

大同市土地退化现状与动态变化研究

通过对大同市水土流失现状与动态变化、土地盐渍化和耕地数量与质量情况动态变化、土地沙漠化现状与动态变化的现状调查来分析大同市土地退化的主要成因以及采取的环境保护对策与建议.     

戴明循环理论在规划环评工作程序中的应用初探

通过分析现阶段我国规划环评的现状和存在的问题,结合国内外规划环评及其工作程序的研究成果,提出使用戴明循环理论对现阶段的规划环评工作程序进行改进,使程序层次化、工作细分化,增强整个规划环评工作的可操作性,使规划环评工作落实到单位和人,明确责任,减少部门间冲突.戴明循环理论的引入,提高规划环评的评价效果和效率,为规划环评提供了一个有效科学的评价方法,有助于规划环评的顺利开展,使环境问题从源头上得到控制,适应建设和谐社会的需要.     

阳极溶出伏安法连续测定底泥中的总镉和总铅

底泥样品经盐酸-硝酸-氢氟酸-高氯酸消解后,用1 1盐政溶解残渣,以高氯酸做支持电解质,采用阳极溶出伏安法的标准加入法,连续测定样品中的总镉和总铅.该方法测定土壤标准样品中镉和铅的相对标准偏差分别为5.6%和4.6%,相对误差分别为2.4%和～1.7%;测定自采底泥样品中镉和铅的相对偏差分别为7.7%和8.1%,方法的重复性好;测定土壤标准样品中镉加标回收率为94.0%～106.8%,铅加标回收率为95%～103.8%;自采样品中镉加标回收率为93.0%～105.6%,铅加标回收率为90.0%～105.0%,方法的准确度较高.实验中,镉和铅的半波电位稳定,峰形对称.     

采用钙钛矿型催化剂(La0.8K0.2Cu0.05Mn0.95O3)同时催化去除NOx和碳烟的研究

将钙钛矿型催化剂与碳烟均匀混合后置于固定床连续流动反应体系中,利用程序升温反应技术,在模拟柴油机尾气的情况下对同时催化去除氮氧化物(NOx)和碳烟的反应进行了实验研究.通过改变含Cu原料的用量,得到不同Cu取代量的催化剂La0.8K0.2CuxMn1-xO3,性能评价结果表明,La0.8K0.2Cu0.05Mn0.95O3催化剂的综合性能较好,碳烟的起燃温度及NO向N2的最大转化率分别为280℃和58.0%.采用该催化剂,进一步考察了进气中NO浓度、O2浓度、进气总流量及催化剂与碳烟的接触状况对反应的影响.研究结果表明,进气中NO浓度、O2浓度、气体总流量和催化剂与碳烟之间的接触状况对NO的去除率的影响比较明显,而对碳烟起燃温度的影响较小.O2浓度从5%变为7.5%时,碳烟的起燃温度及最大NO转化率分别从280℃和53.8%变为270℃和96.7%.碳烟与催化剂松散接触时,碳烟的起燃温度及最大NO转化率分别为290℃和48.4%,紧密接触时分别为275℃和70.4%.而进气中NO浓度、气体总流量的变化对碳烟的燃烧基本上没有影响,虽然NO的转化率有明显变化,但生成的N2总量基本不变.     

Ni2+对2-氯酚厌氧降解系统的影响

针对重金属对难降解有毒有机物厌氧降解的影响问题,采用间歇试验法研究Ni2 对2-氯酚(2-CP)厌氧降解系统的影响规律.结果表明,当ρ(Ni2 )＜5 mg/L时,Ni2 对2-CP厌氧降解表现出轻度促进,当ρ(Ni2 )为5～500 mg/L,Ni2 以抑制作用为主,抑制作用随ρ(Ni2 )的增加而增强.Ni2 对原基质及关键中间产物苯酚和苯甲酸的抑制程度表现为:苯酚＞苯甲酸＞2-CP;ρ(Ni2 )低时的驯化能有效提高厌氧污泥对Ni2 毒性的耐受性能,300 mg/L Ni2 对2-CP降解的抑制从驯化前的65%降至驯化后的21%.Ni2 对2-CP厌氧降解的抑制作用与污泥中Ni的截留量之间存在正相关关系.抑制浓度CIP值和方程αC=[1-(I/I*)m]/[1 (I/I*)n)]能较好地表征厌氧生物处理过程受抑制程度.     

西北地区高速公路建设中的水土保持

就西北地区高速公路建设的水土流失特点进行了分析，并提出了工程防范措施。     

环境风险评价中若干问题探讨

社会经济的高速发展,也诱发了新的环境风险可能性的发生,特别是近年来的多种环境风险灾害事故的发生已引起了各国和国际组织的普遍关注。环境风险评价与环境风险管理已成为保护生态环境、维护公众健康的重要内容和制定决策的重要依据。文章结合目前环境风险评价的发展,探讨有关两大类环境风险评价(突发性与非突发性)以及环境风险评价与安全评价的区别,环境风险评价评估标准以及环境风险评价与城市环境管理的一些问题。