空间高轨高压太阳电池阵静电防护技术研究

目的提高太阳电池阵的可靠性。方法对空间用高轨高压太阳电池阵的静电防护技术进行试验研究,通过外加电弧的方式对太阳电池试验件进行一次放电模拟试验,通过电子注入模拟高轨等离子体环境,采用单一电子能量模拟多能谱能量的环境,对太阳电池阵二次放电进行摸底试验。结果一次放电对太阳电池试验件无影响,二次放电发生时,太阳电池串之间电压的阈值为80 V,二次放电会对太阳电池串输出功率造成一定影响。结论在太阳电池阵设计过程中,控制太阳电池串之间的并联间隙为1 mm,相邻太阳电池串之间电压差不大于80 V、在相邻太阳电池串之间涂敷硅橡胶等方法能有效控制太阳电池阵二次放电的发生,大大提高了太阳电池阵的可靠性。     

STEP WISE,MULTIPLE OBJECTIVE CALIBRATION OF A HYDROLOGIC MODEL FOR A SNOWMELT DOMINATED BASIN1

ABSTRACT: The ability to apply a hydrologic model to large numbers of basins for forecasting purposes requires a quick and effective calibration strategy. This paper presents a step wise, multiple objective, automated procedure for hydrologic model calibration. This procedure includes the sequential calibration of a model's simulation of solar radiation (SR), potential evapotranspiration (PET), water balance, and daily runoff. The procedure uses the Shuffled Complex Evolution global search algorithm to calibrate the U.S. Geological Survey's Precipitation Runoff Modeling System in the Yampa River basin of Colorado. This process assures that intermediate states of the model (SR and PET on a monthly mean basis), as well as the water balance and components of the daily hydrograph are simulated consistently with measured values.     

阳光型建筑与城市可持续发展

文章介绍了阳光型建筑的特点，原理，论述了其对城市可持续发展的重大意义，并建议政府支持阳光型建筑的开发工作。     

PCM thermal conductivity effect on mechanism of PV/PCM thermal control characteristics

ABSTRACT

According to the structure of photovoltaic/phase change material (PV/PCM), the mechanism of internal heat transfer, transmission, storage, and temperature control is analyzed, and a two-dimensional finite element analysis model of PV/PCM structure is established. This study is carried out on the effect of PCM thermal conductivity on internal temperature distribution characteristics of PV/PCM and temperature control characteristics of solar cells. The results show that the increase in thermal conductivity of PCM can prolong the temperature control time of solar cell in PV/PCM system, for example, when the thermal conductivity is increased from 0.2 W/(m·K) to1.5 W/(m·K) under a thickness of 4 cm, the duration when PV/PCM solar cell temperature is controlled below 40°C and extended from 52 min to 184 min. In addition, PV/PCM experimental prototypes are designed with the LA-SA-EG composite PCM peak melting point of 46°C and thermal conductivity of 0.8 W/(m·K) and 1.1 W/(m·K), respectively. The results indicate that compared with PCM-free solar cells, the maximum temperature of PV/PCM prototype solar cells with thermal conductivity of 0.8 W/(m·K) and 1.1 W/(m·K) is reduced by 10.8°C and 4.6°C, respectively, with average output power increased by 4.1% and 2.2%, respectively, under simulated light sources. Under natural light conditions, the average output power is increased by 6.9% and 4.3%, respectively. The results provide theoretical and experimental basis for the optimization of PV/PCM design by changing the thermal conductivity of PCM.     

烟台市生态经济系统的能值分析

利用能值分析方法分析了2013年烟台市生态经济系统的能值流动状况,并提出了相应的能值利用调控对策。2013年烟台市生态经济系统的能值总用量为2.630×1023 sej,人均能值用量为4.044×10^16 sej,能值自给率为22.6%,能值密度为19.14×10^12sej/m^2,能值货币比率为2.848×10^12sej/,电力能值占能值总用量的比例为5.6%,由可更新资源及其产品支持的人口承载力为16.19×10^4人,由可更新资源及其产品、进口产品及技术共同支持的人口承载量为518.6×10^4人,能值可持续指标值为4.986。将上述计算结果与其它国家和地区进行比较表明：虽然目前烟台市经济较发达,能值利用效率和人民生活水平较高,生态经济系统的能值使用总体上符合区域可持续发展的要求,但系统能值自给率较低,生态环境比较脆弱,经济增长对外部输入的能源和资源依赖性较强。据此,提出了调整产业结构、转变经济增长方式、加强电力资源开发、发展科学教育事业等能值利用的调控对策。     

日光温室环境空气的变化规律及质量评价

为明确日光温室环境空气质量的变化规律,采用实地固点监测的方法,选取1、5和10 a棚龄的日光温室,分别对其室内温度、相对湿度、可吸入颗粒物(PM10)、总悬浮物(TSP)及Cl2、NH3、NO、O3进行监测,并对室内空气质量进行评价。结果表明,温室内温湿度、气体浓度变化与外界气象条件变化关系密切,温室内PM10和TSP浓度随棚龄的增大而逐渐升高。不同棚龄温室内Cl2、NH3、NO和O3浓度日、月变化规律一致,Cl2、NH3和O3浓度峰值出现在午后,NO浓度峰值出现在揭苫和盖苫前后,且O3与NO浓度呈负相关(r=-0.964),1、5和10 a棚龄的日光温室内Cl2日平均浓度和NH3日最高浓度均超过国家标准,而NO和O3浓度未超标。温室内PM10和TSP浓度以10 a棚龄温室为最高,1 a棚龄温室为最低。1—2月温室内PM10和TSP浓度最高,且10 a棚龄温室内PM10超过国家标准。     

国外光伏发电并入智能电网发展探讨

智能电网是未来电网发展的主要趋势。随着人们对环境保护的重视,如何将风能、太阳能等可再生能源大规模接入电网已经成为智能电网下一阶段的研究方向。介绍了国外光伏发电技术发展,概述了国外对光伏发电并入智能电网的最新研究,提出了光伏并网发电面临的问题以及相关建议,为我国未来光伏并网发电的实施提供参考。     

城市臭氧污染特征与高影响气象因子：以苏州为例

近年来城市臭氧(O₃)污染问题日益突出,影响O₃污染的关键气象因子尚不明确,因此分析典型城市——苏州的O₃污染特征,探究O₃污染的高影响气象因子,对该区域大气污染防治具有重要意义.基于苏州环境监测中心2015～2020年4～9月逐小时O₃浓度数据及同期气象观测资料,应用相关分析和机器学习方法对其开展相关分析研究.结果表明：(1) 6年间O₃污染高发季,O₃污染超标率均达20%以上,O₃污染日数和以O₃为首要污染物的污染日数占比均逐年上升,O₃污染问题日益凸显;(2) O₃浓度存在单峰日变化特点,谷值出现在07:00前后,峰值出现在15:00～16:00;其与气温和太阳辐射能的日内变化趋势较一致,但其浓度峰值出现时刻又滞后于二者. 2017年和2019年O₃有典型的“周末效应”,周末较高的太阳辐照度对O₃浓...     

造纸污泥太阳能干化处理工艺设计

太阳能作为一种清洁能源,将其应用在造纸污泥干化中,与传统干化工艺相比具有能耗低、无污染、运行费用低廉、操作简单、运行安全稳定、干化后的污泥仍保留原有的价值等特点。以某造纸污泥的干化为例,介绍了该工艺的工作原理及流程、工艺单元设计等。     

Comparison of sensitivity analysis techniques: A case study with the rice model WARM

The considerable complexity often included in biophysical models leads to the need of specifying a large number of parameters and inputs, which are available with various levels of uncertainty. Also, models may behave counter-intuitively, particularly when there are nonlinearities in multiple input-output relationships. Quantitative knowledge of the sensitivity of models to changes in their parameters is hence a prerequisite for operational use of models. This can be achieved using sensitivity analysis (SA) via methods which differ for specific characteristics, including computational resources required to perform the analysis. Running SA on biophysical models across several contexts requires flexible and computationally efficient SA approaches, which must be able to account also for possible interactions among parameters. A number of SA experiments were performed on a crop model for the simulation of rice growth (Water Accounting Rice Model, WARM) in Northern Italy. SAs were carried out using the Morris method, three regression-based methods (Latin hypercube sampling, random and Quasi-Random, LpTau), and two methods based on variance decomposition: Extended Fourier Amplitude Sensitivity Test (E-FAST) and Sobol’, with the latter adopted as benchmark. Aboveground biomass at physiological maturity was selected as reference output to facilitate the comparison of alternative SA methods. Rankings of crop parameters (from the most to the least relevant) were generated according to sensitivity experiments using different SA methods and alternate parameterizations for each method, and calculating the top-down coefficient of concordance (TDCC) as measure of agreement between rankings. With few exceptions, significant TDCC values were obtained both for different parameterizations within each method and for the comparison of each method to the Sobol’ one. The substantial stability observed in the rankings seem to indicate that, for a crop model of average complexity such as WARM, resource intensive SA methods could not be needed to identify most relevant parameters. In fact, the simplest among the SA methods used (i.e., Morris method) produced results comparable to those obtained by methods more computationally expensive.