矿井通风网络复杂度与风机控制力量化计算

为了探究矿井通风网络复杂度与风机控制力的关系,提出分支关联度、最小距离、通风网络复杂度和风机控制力的概念。利用vCad2.0进行数字实验,对网络复杂度与风机控制力的关系进行定量研究。结果表明:随着网络复杂度的增加,矿井通风系统的有效风量率减小,且认为该值减小到60%时,视为风机控制力的极限,此时网络拓扑结构为风机所能控制的最大网络复杂度。地面集中供风时,同时工作的中段数量存在上限,最大值为7。将结论用于某有色金属矿进行实证研究,找出该矿深部中段通风困难的原因,为矿井进一步整改提供理论依据。     

日光温室黄瓜低温冷害风险评估技术研究

基于人工气候箱和大田试验观测结果,探讨了日光温室黄瓜生产低温冷害气象指标确定技术,将冬季黄瓜生产低温冷害分为无灾、轻灾、中灾和重灾4个等级,利用层次分析法和GIS技术,对日光温室黄瓜生产低温冷害综合风险进行评估.结果表明,山东省各级冷害出现日数随着低温冷害程度的加重呈减少的趋势,但区域间存在一定差异.鲁北、鲁西北北部、鲁中北部以及半岛内陆地区遭受低温冷害风险较高,半岛东部沿海、鲁西南、鲁南及鲁东南沿海区域风险较低,其他地区属于中度风险.     

Threshold management in a coupled economic–ecological system

Economic analysis of optimal ecosystem management in the presence of a threshold has typically ignored the potential for induced behavioral responses. This paper contributes to the literature on non-convex ecosystem management by considering the implications of a particular behavioral response in a regional economy – that of amenity-led growth – to changes in ecosystem services generated by a lake ecosystem subject to a eutrophication threshold. The essential policy challenge is to achieve optimal levels of lake nutrients and urbanization given that improvements to water quality will induce additional migration and urbanization in the region with attendant ecological impacts. We show that policies that ignore the recursive relationship between urbanization and water quality unintentionally exacerbate boom-bust cycles of regional growth and decline and risk pushing the system towards long-run economic decline. In contrast, the optimal policy accounts for the behavioral feedbacks to improved ecosystem services, and balances regional growth and ecological degradation.     

三棱钻杆粉体负载扭矩计算模型研究

为了实现三棱钻杆转动过程的定量化计算,在分析了三棱钻杆排粉机理的基础上,提出了基本假设,建立了扭矩基本物理模型,并阐述了物理模型的求解过程,得到了基本参数的解析解。在此基础上,对相关参数的求取方法以及最小扭矩问题进行了分析讨论,求得了钻孔内煤粉密度ρ的解析解以及降低钻杆整体扭矩的方法,提出了实际应用环节测定临界转速w界的实验方法,并得到了提高钻孔长度的理论方法。     

全聚苯胺太阳能电池材料的制备和性能

采用电化学和化学的方法制备了硫酸掺杂的p型导电聚苯胺和萘钠掺杂的n型导电聚苯胺,采用扫描电镜、X衍射分析、红外、紫外-可见分光光度计和和四探针法等手段对各种聚苯胺的形貌、结构和导电性等能进行了分析;将p型和n型导电聚苯胺组装成太阳能电池,研究了材料的结构、性能、电池的组装方式对太阳能电池性能的影响.结果表明:制备的p型和n型导电聚苯胺呈球形,堆砌结实,平均粒径在30—50nm,结晶度较大,导电性优异,在可见光区有强烈的吸收;由两者组成的双层太阳能电池性能优异,其开路电压为1.65V,短路电流为1.66mA.cm-2,填充因子为0.35,光电转换效率为2.96%.     

Analytical Study of the Heat Loss Attenuation by Clothing on Thermal Manikins Under Radiative Heat Loads

For wearers of protective clothing in radiation environments there are no quantitative guidelines available for the effect of a radiative heat load on heat exchange. Under the European Union funded project ThermProtect an analytical effort was defined to address the issue of radiative heat load while wearing protective clothing. As within the ThermProtect project much information has become available from thermal manikin experiments in thermal radiation environments, these sets of experimental data are used to verify the analytical approach. The analytical approach provided a good prediction of the heat loss in the manikin experiments, 95% of the variance was explained by the model. The model has not yet been validated at high radiative heat loads and neglects some physical properties of the radiation emissivity. Still, the analytical approach provides a pragmatic approach and may be useful for practical implementation in protective clothing standards for moderate thermal radiation environments.     

The Potential of Using Solar Energy to Process Full-Fat Soybeans (Glycine max) to Reduce Urease Activity

The objective of this study was to investigate the efficacy of panel solar cookers in reducing urease activity in full-fat soybeans (Glycine max). Changes in urease activity of soaked (SM), coarse-milled (CM) and whole dry (WM) full fat soybeans were investigated by roasting for 0, 30, 60, 90, 120, 150 and 180 min in multiple reflector panel solar cookers, in a 3 3 3 factorial experiment. Soaking soybeans for 14 h reduced (p<0.05) ^{1 1}P < 0.05 means that the probability (p) of falsely concluding significant difference between values obtained after statistical analysis was less than 5% (0.05). urease activity by 9%, from 6.58 meqNH₃/g DM to 5.98 meqNH₃/g DM. After 180 min of solar roasting, urease activity levels had declined by 81%, 67% and 23% in soaked, milled and whole dry soybeans respectively. Full fat soybean urease activity can be reduced faster in soaked than in dry soybeans. Findings suggest that there is potential in using multiple reflector panel solar cookers to reduce urease activity in full fat soybeans.     

基于G1-VPRS-MIE多层次灰色理论的引水明渠运行风险评价

引水明渠的安全运行风险评价对减少和预防其在输水运行过程中的灾害发生、提高其在运营期间的社会经济效益具有重要的意义。为了对引水明渠在运行期间的风险进行合理赋权和评价,通过科学合理的方法构建了多指标参数的明渠运行风险影响因素指标体系,包括主体结构风险、自然风险、水污染风险、组织管理风险和运行调度风险5个风险因子子系统及20个二级指标在内的评价指标体系;运用G1和VPRS法分别确定各指标的主观权重和客观权重,结合MIE理论优化指标权重;根据明渠工程的运行特点,选取多层次灰色理论计算引水明渠运行风险值,并根据相关规范和安全风险评价实践确定风险评价等级。将该模型应用于引大入秦工程中,结果表明:采用序关系分析法(G1法)和变精度粗糙集理论(VPRS)并结合最小信息熵原理(MIE)的权重确定方法(G1-VPRS-MIE),不但避免了层次分析法过度依赖专家的主观经验、克服了粗糙集理论在边界刻画的局限性,而且弥补了主观和客观方法相结合的不足;对于指标权重的确定更加客观合理,既能满足所得权重的客观性,也能保证评估结果具有一定的解释性,同时能够减少单一权重计算的偏差;多层次灰色评价模型对于引水明渠安全运行风险等级的确定较为有效,并得出其风险等级为中等偏高,与实际情况一致。研究成果为引水明渠工程安全运行提供了一定的参考,同时可为类似气候环境的引水明渠区域规划、设计、施工提供有效的借鉴。     

燃煤发电职业危害暴露健康负担评价方法*

为评估煤电行业从业人员因遭受职业危害暴露引起的健康负担大小,根据工作暴露矩阵法对燃煤发电职业暴露程度进行估算,利用健康效应分析和伤残调整寿命年指标构建燃煤发电职业暴露健康负担评价体系,实现职业暴露健康负担的量化评价。将所构建的评价体系应用于3个燃煤电厂进行对比分析,结果表明:各类危害因素中,粉尘所致健康危害最大,人均健康负担约为8.861 a;各生产环节中,运输煤系统所致健康影响最大,约占整个生产过程的45.53%。     

Experimental analysis of thermal performance of evacuated tube and flat-plate solar air collectors at different air flow rates

The thermal performances of an evacuated tube collector (ETC) and flat-plate solar air collector (FPC) are experimentally investigated at different air flow rates. To investigate the performance of the ETC and FPC, experimental set-ups were fabricated. Air was used as a working fluid and tested at the same climatic conditions. The ETC had 15 evacuated tubes with a surface area of 1.66 m². The experimental set-up consisted of a header with a hollow pipe (square pipe) in the centre through which the air flowed. The flat-plate collector had a surface area of 1.35 m². The FPC had a black painted absorber sheet which divides the collector into two sections. The air flowed through the upper and the lower sections parallel to the collector to minimize the overall heat loss. The temperature of the outlet air depends on several factors along with the airflow rate and the intensity of the solar radiation. It was found that during the day at high flow rates, the efficiency of the ETC varies from 0.12 to 0.5, and for the flat plate it was from 0.29 to 0.68. The maximum temperature of the air was 56.7°C for the ETC and 25.7°C for the FPC.