Maximum power point tracking methods for photovoltaic systems operating under partially shaded or rapidly variable insolation conditions: a review paper

To increase the efficiency of photovoltaic (PV) systems, maximum power point (MPP) tracking of the solar arrays is needed. Under partially shaded conditions (PSCs), the solar arrays power–current (P–I) characteristic has multiple MPP. This paper presents various methods and approaches of tracking the MPP from a PV generator operating under PSC. Some comparisons, advantages, drawbacks and critical analysis of each method are discussed. It was found that, indirect methods use empirical data or mathematical expressions of numerical approximations to estimate the MPP from the PV generator’s voltage, current and irradiance. Direct methods offer the advantage of obtaining the actual maximum power from the PV generator’s voltage and current. Artificial intelligence methods do not need exact mathematical models. They can perform under parameter variation, load and supply voltage disturbances. Finally, novel methods require less number of iterations to converge, independent to the initial conditions. All these algorithms can be included in some of the DC/DC converters and MPP trackers for stand-alone or grid-connected systems.     

Experimental investigation into different selectively coated receivers and silver-coated selective surface compound parabolic reflector using regression modelling for industrial heating

The paper explores the experimental results of the prototype compound parabolic trough made of mild steel and silver-coated selective surface. This prototype has been tested with top cover. The performance of the collector has been evaluated with two kinds of receivers coated with three types of black coatings. First receiver is of copper coated with black copper, second receiver is of mild steel coated with black copper and third receiver is of copper coated with black zinc. From actual field experiments, it has been observed that the efficiency of the system achieved with copper receiver coated with black copper is comparatively higher than the other two types of receivers. A simple regression analysis is used to correlate the thermal performance parameters of the system.     

Identifying the roots of Green Civil War over utility-scale solar energy projects on public lands across the American Southwest

Utility-scale solar energy (USSE) development is an emerging cause of land use change across the American Southwest. Many proposed projects in the region have encountered resistance from environmental groups because of concern about endangered, threatened, and special status species. Projects have also faced resistance from impacted local communities and Native American tribes. This research documents land use conflicts that surfaced during the initial wave of USSE development from 2009 to 2015. The goal is to identify potential roots of land use conflict over renewable energy development, to help explain why there is consistent support for renewables in general, but widespread opposition to projects during the proposal and development stages. The primary data presented include public comments to formal rule-making processes, semi-structured interviews conducted from 2009 to 2013, and various media sources. The paper concludes describing emerging planning frameworks that identify sites for USSE with fewer land use conflicts.     

CFD analysis on the performance of a solar chimney power plant system: Case study in Algeria

The solar chimney power plant (SCPP) is a power generator which uses solar radiation to increase the internal energy of the air circulating in the system, thereby transforming the useful gain of the solar collector into kinetic energy. The produced kinetic energy then can be converted into electrical energy by means of an appropriate turbine. In this paper, four locations in Algeria

(Constantine, Ouargla, Adrar, and Tamanrasset) were considered as case studies to describe the SCPP mechanism in detail. Numerical simulation of an SCPP which has the same geometrical dimensions was performed to estimate the power output of SCPP in these regions. Using the CFD software FLUENT we simulated a two-dimensional axisymmetric model of a SCPP with the standard k-ε turbulence model. The simulation results show that the highest power output produced monthly average value 68–73 KW over the year and the highest hourly power produced in June is around 109–113 KW.     

Optimization of thermal performance of the parabolic trough solar collector systems based on GA-BP neural network model

The aim of this paper is to optimize the thermal performance (system output energy, thermal efficiency, and heat loss of cavity absorber) of parabolic trough solar collector (PTC) systems in order to improve its thermal performance, based on the genetic algorithm-back propagation (GA-BP) neural network model. There are a number of undefined problems, fuzzy or incomplete information and a complex thermal performance of the PTC systems. Therefore, the thermal performance prediction of the PTC systems based on GA-BP neural network model was developed. Subsequently, the metrics performances have been adopted to comprehensively understand the algorithm and evaluate the prediction accuracy. Results revealed that the GA-BP neural network model can be successfully used to predict the complex nonlinear relationship between the input variables and thermal performance of the PTC systems. The cosine effect has a great influence on the thermal performance; thereby the geometrical structure of the PTC systems was optimized. It was found that the optimized geometrical structure was beneficial to improve the thermal performance of the PTC system. In conclusion, the GA-BP neural network model has higher prediction accuracy than the other algorithm and it can be feasible and reliable.     

Moisture transfer modeling during solar drying of potato cylinders considering shrinkage

In the present work, the thin layer drying kinetics of potato during natural convection solar drying was investigated experimentally. Cylindrical potato samples with length 50 mm and varying diameter of 8, 10 and 13 mm were dried in an in-house designed and fabricated laboratory scale mixed-mode solar dryer. Thirteen different thin-layer mathematical models were fitted to the experimental moisture ratio (MR) data. The obtained results indicated that the Modified Page model could satisfactorily describe the drying curve of potato cylinders with higher value of R² and lower values of RMSE and χ². The shrinkage parameter is incorporated in the analytical diffusion model to study the moisture transfer mechanism of potato cylinders. It was observed that the values of effective diffusion coefficient (D_eff) and convective mass transfer coefficient (h_m) are overestimated in the range of 85.02–90.27% and 39.11–45.11% for the range of sample diameter examined, without considering the shrinkage effect in the mass transfer analysis. A Multiphysics approach was adopted in this study to get insight into the drying behavior of potato cylinders in terms of food-moisture interactions during the solar drying process. The predicted results of MR are in close agreement with the experimental data. Moreover, the anisotropic behavior of shrinkage as well as the moisture distribution inside the potato cylinder was very well described by Multiphysics model.     

Global solar radiation and energy yield estimation from photovoltaic power plants for small loads

Daily global solar radiation on a horizontal surface and duration of sunshine hours have been determined experimentally for five meteorological stations in Saudi Arabia, namely, Abha, Al-Ahsa, Al-Jouf, Al-Qaisumah, and Wadi Al-Dawaser sites. Five-years of data covering 1998–2002 period have been used. Suitable Angstrom models have been developed for the global solar radiation estimation as a function of the sunshine duration for each respective sites. Daily averages of monthly solar PV power outputs have been determined using the Angstrom models developed. The effect of the PV cell temperature on the PV efficiency has been considered in calculating the PV power output. The annual average PV output energy has been discussed in all five sites for small loads. The minimum and maximum monthly average values of the daily global solar radiation are found to be 12.09 MJ/m²/d and 30.42 MJ/m²/d for Al-Qaisumah and Al-Jouf in the months of December June, respectively. Minimum monthly average sunshine hours of 5.89 hr were observed in Al-Qaisumah in December while a maximum of 12.92 hr in Al-Jouf in the month of June. Shortest range of sunshine hours of 7.33–10.12 hr was recorded at Abha station. Minimum monthly average Solar PV power of 1.59 MJ/m²/day was obtained at Al-Qaisumah in the month of December and a maximum of 3.39 MJ/m²/day at Al-Jouf in June. The annual PV energy output was found to be 276.04 kWh/m², 257.36 kWh/m², 256.75 kWh/m², 245.44 kWh/m², and 270.95 kWh/m² at Abha, Al-Ahsa, Al-Jouf, Al-Qaisumah, and Wadi Al-Dawaser stations, respectively. It is found that the Abha site yields the highest solar PV energy among the five sites considered.     

The influences of recycle effect on double-pass V-corrugated solar air heaters

The study of the heat transfer enhancement for the recycling double-pass V-corrugated solar air heaters, which implement the external recycle of flowing air, was investigated experimentally and theoretically. The comparison among different designs of V-corrugated, baffled and fins attached, and flat-plate collectors was made to show the device performance improvement with various operating parameters under the same working dimensions. The recycling double-pass V-corrugated device developed here was proposed in aiming to strengthen the convective heat-transfer coefficient and enlarge the heat transfer area. The error analysis of experimental results deviate by 0.85–2.46% from the theoretical predictions with the fairly good agreement, and both results show that the device performance of the recycling double-pass V-corrugated operation is better than those of the other configurations under various recycle ratios and mass flow rates. The suitable selections were obtained for operating recycling double-pass V-corrugated devices while considering with an economic viewpoint by both the collector efficiency enhancement and the power consumption increment.     

Gaseous mercury emissions from unsterilized and sterilized soils: The effect of temperature and UV radiation

Mercury (Hg) emissions from the soils taken from two different sites (deciduous and coniferous forests) in the Adirondacks were measured in outdoor and laboratory experiments. Some of the soil samples were irradiated to eliminate biological activity. The result from the outdoor measurements with different soils suggests the Hg emission from the soils is partly limited by fallen leaves covering the soils which helps maintain relatively high soil moisture and limits the amount of heat and solar radiation reaching the soil surface. In laboratory experiments exposure to UV-A (365 nm) had no significant effect on the Hg emissions while the Hg emissions increased dramatically during exposure to UV-B (302 nm) light suggesting UV-B directly reduced soil-associated Hg. Overall these results indicate that for these soils biotic processes have a relatively constant and smaller influence on the Hg emission from the soil than the more variable abiotic processes.     

Assessment of indoor radiation level in the environs of the uranium deposit area of West Khasi Hills District,Meghalaya, India

An estimation of the indoor background radiation dose distribution was carried out in dwellings of eleven villages located within and around the uranium mineralization area of Kylleng-Pyndensohiong, Mawthabah in West Khasi Hills District of Meghalaya, India. The ambient indoor gamma radiation level was monitored using Thermo Luminescence Dosimeters (TLDs) while the indoor radon and thoron concentration was measured using twin-cup dosimeters employing Solid State Nuclear Track Detectors (SSNTDs). Results obtained from the study reveals that the local inhabitants of villages located close to the mining site receive higher doses than those inhabitants of villages located at a much farther distance from the mining site. The average total annual effective dose was found to be varying from 1.2 mSv y⁻¹ in the village of Langpa to 3.4 mSv y⁻¹ in the village of Nongbah Jynrin. The data obtained will serve as a reference in documenting changes to environmental radioactivity if mining is to be carried out in the future.