武器装备电磁兼容性预测试技术初探

阐述了电磁兼容性(EMC)和电磁兼容测量的基本概念,通过分析EMC认证测试与EMC预测试的特点,总结了EMC预测试的优点.EMC预测试分为指标性预测试和故障诊断预测试.以一些EMC测试项为例,详细描述了这两种预测试的测试方法,最后简述了对电磁兼容性设计的整改措施.     

Sensitivity of some groups of ordinary chernozem soil microorganisms to γ irradiation

The effect of γ irradiation at doses of 1, 5, 10, and 20 kGy on the microflora of ordinary chernozem soil has been studied. The time course of the restoration of the microorganism numbers over 180 days after γ irradiation has been studied in model experiments. The microorganism radioresistance decreases in the following order: amylolytic bacteria > Azotobacter > spore-forming bacteria > ammonifiers > micromycetes. A dose of 20 kGy has a 96% suppressing effect on all microorganisms. Model experiments on the restoration of the irradiated soil microflora have revealed different rates of increase in the numbers of microorganism groups depending on the dose and incubation time.     

Experimental analysis of thermal performance of evacuated tube and flat-plate solar air collectors at different air flow rates

The thermal performances of an evacuated tube collector (ETC) and flat-plate solar air collector (FPC) are experimentally investigated at different air flow rates. To investigate the performance of the ETC and FPC, experimental set-ups were fabricated. Air was used as a working fluid and tested at the same climatic conditions. The ETC had 15 evacuated tubes with a surface area of 1.66 m². The experimental set-up consisted of a header with a hollow pipe (square pipe) in the centre through which the air flowed. The flat-plate collector had a surface area of 1.35 m². The FPC had a black painted absorber sheet which divides the collector into two sections. The air flowed through the upper and the lower sections parallel to the collector to minimize the overall heat loss. The temperature of the outlet air depends on several factors along with the airflow rate and the intensity of the solar radiation. It was found that during the day at high flow rates, the efficiency of the ETC varies from 0.12 to 0.5, and for the flat plate it was from 0.29 to 0.68. The maximum temperature of the air was 56.7°C for the ETC and 25.7°C for the FPC.     

Renewable energy potential in India and future agenda of research

ABSTRACT

Demand of electrical energy is exponentially increasing causing environmental problems due to extensive use of fossil fuels. Hence, research has been promoted in renewable energy technologies to mitigate environmental pollution. Indian subcontinent is rich in renewable energy sources (RES). This paper describes potential of RES and region-wise installed capacity in India. Estimated potential of RES is 57 GW which is targeted to be 175 GW by 2022. A logical framework for our future research work has been presented. This includes performance optimisation of solar pumping system and reliability assessments of the designed system using reliability indices.

Abbreviation: RES: Renewable energy resources; SHP: small hydro plants; GOI: Government of India; MNRE: Ministry of New and Renewable Energy; LHP: large hydropower; BCM: billion cubic metres; PEC: per-capita energy consumption; JNNSM: Jawaharlal Nehru National Solar Mission; DNI: direct normal irradiance; SPV: solar photovoltaic; UMPP: ultra mega green solar power project; GIS: geographic information systems; WMS: wind monitoring stations; MPWL: Madhya Pradesh windfarms Ltd.; MIB: mat river basin; SWAT: Soil and Water Assessment Tool; ROR: run of river; SMS: short message service; CDM: clean development mechanism; NIOT: national institute of ocean technology; LOLP: loss of load probability; CSO: Central Statistics Office; CEA: Central Electricity Authority; TERI: The Energy and Resources Institute; WPI: Wind Power India; IEA: International Energy Agency; EAI: Energy Alternatives India; BKP: Biomass Knowledge Portal; IRENA: International Renewable Energy Agency; GAIN: Global Agricultural Information Network; NITI: National Institution for Transforming India; NIWE: National Institute of Wind Energy; UP: Uttar Pradesh; J&K: Jammu and Kashmir; HP: Himachal Pradesh; NR: northern region; MP: Madhya Pradesh; WR: western region; TN: Tamil Nadu; AP: Andhra Pradesh; SR: southern region; ER: eastern region; NER: north eastern region; A&N: Andaman & Nicobar     

基于改进辐射模型的乡镇人口流动网络研究

乡镇尺度的人口流动联系和空间结构研究对统筹区域城镇体系规划和产业结构调整具有重要意义.本文以复杂网络理论为研究视角,将空间可达性引入传统辐射模型进行参数修正,构建乡镇人口流动网络;从节点和社团结构以及无标度和小世界特征等方面,探讨在地域差异影响下人口流动的空间分布格局和复杂网络特征,并以荆门市55个乡镇为例进行实证研究.结果表明:①荆门市乡镇人口流动网络的节点度分布以高发展水平乡镇为核心,呈现“一横二纵”的空间分异格局,与荆门市城镇体系和产业布局存在极强的耦合关系;②全网包含四个社团,各社团内部联系紧密且空间结构特征各异,社团间联系相对松散.③受空间距离和地理环境影响,网络的无标度特征不够明显;④网络具有一定的小世界特征,整体联通性和局部集聚性较好.本文通过对传统模型进行方法改进,实现了异质空间下乡镇人口流动联系及分布的可视化表达,实例研究结果可为荆门市城镇规划和产业布局提供决策思路.     

环境审计制度选择影响因素的实证分析

随着环境问题的日益严重,污染治理工具的选择和实施成为社会各界普遍关注的焦点.本文选择150个国家的国别数据,采取logit模型对环境审计制度选择的影响因素进行分析.研究结果表明,经济发展水平、环境保护投资和社会信息化程度与一国是否开展环境审计成显著正相关;审计体制对环境审计的开展也具有显著性影响;而污染排放现状、邻国的决策对环境审计制度选择的影响并不显著.本文的研究表明,与传统命令——控制型规制工具的普适性不同,作为一种信息化的污染治理工具,环境审计是经济社会发展到一定阶段国家最高审计机关的选择.进一步,利用我国2007年-2011年的相关数据进行基于主成分回归的符合性检验,结果显示环境审计的概率值p皆高于50％,且逐年递增,表明我国现阶段实施环境审计的条件和时机已经基本成熟.本文的研究发现为我国最高审计机关“十二五”期间将环境审计作为一种独立的审计类型,在全国推行环境审计工作提供了理论依据.     

不同行业减排对我国东部地区空气质量及大气温度的影响

未来我国减排政策更加关注对大气污染和大气增温的协同控制效果,但不同行业减排对空气质量改善和大气温度的影响不同.利用双向耦合的空气质量模型WRF-Chem,通过多组敏感性试验量化各部门人为源（工业源、居民源、交通源、火电厂和农业源）减排对2016年9月我国东部地区空气质量和大气温度的影响.结果表明,工业源、居民源、交通源、火电厂和农业源减排均能有效改善空气质量,PM_2.5浓度分别下降33.9%、9.6%、15.8%、10.8%和26.7%,但减弱的气溶胶-辐射相互作用使地表层获得更多能量,进而增加近地面气温0.04、0.03、0.01、0.03和0.09℃.在大气层顶,工业源、居民源、交通源和火电厂减排分别导致净辐射通量下降0.3、0.8、0.7和0.1 W·m^-2;而农业源减排则引起大气层顶净辐射通量增加0.8 W·m^-2.一方面,减排农业源导致散射性气溶胶下降进而引起净辐射增加;另一方面,减排农业源不会导致吸收性气溶胶（黑碳）下降,不能抵消散射性气溶胶下降引起的辐射增加.因此,减排农业源会导致大气层顶净辐射通量增加,同时近地面温度增加也最为显著.未来需要特别关注的是,尽管控制农业源排放会带来显著的空气质量改善,但同时会带来不利的显著增温后果.     

Quantification of uncertainty of experimental measurement in leaching test on cement-based materials

When mineral wastes are reused in construction materials, a current practice is to evaluate their environmental impact using standard leaching test. However, due to the uncertainty of the measurement, it is usually quite difficult to estimate the pollutant potential compared to other materials or threshold limits. The aim of this paper is to give a quantitative evaluation of the uncertainty of leachate concentrations of cement-based materials, as a function of the number of test performed. The relative standard deviations and relative confidence intervals are determined using experimental data in order to give a global evaluation of the uncertainty of leachate concentrations (determination of total relative standard deviation). Various combinations were realized in order to point out the origin of large dispersion of the results (determination of relative standard deviation linked to analytical measured and to leaching procedure), generalisation was suggested and the results were compared to literature. An actual example was given about the introduction of residue (meat and bone meal bottom ash--MBM-BA) in mortar, leaching tests were carried out on various samples with and without residue MBM-BA. In conclusion large dispersion were observed and mainly due to heterogeneity of materials. So heightened attention needed to analyse leaching result on cement-based materials and further more other tests (e.g. ecotoxicology) should be performed to evaluate the environmental effect of these materials.     

可靠性增长摸底试验方法研究分析

介绍了可靠性增长摸底试验方法的适用范围,对其试验对象进行了探讨,并对如何确定最佳试验时间的两种方法进行了研究.分析指出试验应力的选取也是影响可靠性增长摸底试验效果的关键因素,并用具体试验方案举例说明其有效性,证明了开展可靠性增长摸底试验这项工作可达到快速有效、节约经费的作用.     

大空间建筑烟气填充研究方法的对比

为了对大空间建筑烟气填充研究方法进行对比分析。以一个废弃的大空间仓库为研究对象,采用了全尺寸火灾实验、计算机数值模拟和理论分析相互应用验证的研究方法,研究理论及数值模拟两种火灾烟气层高度的描述方法的准确性。结果表明当采用t2火模型时,在与现实的吻合程度方面,数值模拟〉Zukoski理论模型〉Yamana-Tanaka理论模型;随着火灾的不断发展,相对误差逐渐增大。通过对比分析发现,全尺寸实验、理论模型和数值模拟三种方法相互验证可以更好地保证研究的准确性;总结得到了两种与现实较吻合的描述烟气层高度的理论方法,并且提出减小误差应注意的几点事项,包括尽可能提高火源热释放速率、烟气层温度描述的准确性;不考虑火源热量通过建筑边界结构散失等。